PP-R mini ball valve with brass ball

Ref Price:
Loading Port:
Ningbo
Payment Terms:
TT OR LC
Min Order Qty:
1000 pc
Supply Capability:
100000 pc/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Item specifice:

Brand: SPT Standard: ISO9001 Color: White&Green&Grey

Product Description:

Picture:


PP-R  mini  ball  valve  with brass ball

PP-R  mini  ball  valve  with brass ball

Product Applications:

Distribution for cool and hot water
Duct for drinkable water system
Pipes for kinds of high-temperature and low-temperature heating system
Pipes for heating and coolling settings in solar energy system
Connecting pipe for air conditioners

 

Product Advantages:

1) Healthy, bacteriological neutral, conforming to drinking water standards
2) Resistant to high temperatures, good impact strength

3) Convenient and reliable installation, low construction expenses
4) Excellent heat-insulation property from minimum thermal conductivity
5) Lightweight, convenient to transport and handle, good for labor-saving.
6) Smooth inner walls reduce pressure loss and increase flow speed
7) Sound insulation (reduced by 40% compared to galvanized steel pipes)
8) Light colors and excellent design ensure suitability for both exposed and hidden installation
9) Recyclable, environment-friendly, accords with GBM standards

 

FAQ:

Q1:How Can I Get A Sample?

A1:You can get samples by communicate with our export sales.

Q2:How Long Is Delivery?

A2:Delivery time will be30-45days according to order quantity.

Q3:What Is The MOQ?

A3:MOQ depends on different items.

Q4:What Is Our Normal Payments Terms?

A4:Our normal payment terms now is: T/T, L/C or western union,paypal


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Natural gas aluminum pipes, what fittings are best used?
Special pipe fittings for copper plastic aluminium tube.The aluminum plastic pipe is a composite pipe which is welded longitudinally by an intermediate aluminum pipe and is lined with polyethylene plastic inside and outside, and is bonded with hot melt adhesive between the layer and the layer. According to the use of classification, there are ordinary drinking water pipes, high temperature pipes, gas pipes. Gas aluminum composite pipe has yellow Q mark, mainly used to transport natural gas, liquefied petroleum gas and gas pipeline system. Because the middle layer of aluminum plastic pipe is made of aluminum, the permeation of gas on plastic can be avoided, so the utility model is more suitable for gas pipelines.
Q:What kinds of PE pipe joint
PE is the most basic plastic of polyethylene plastics, plastic bags, plastic film and so on are PE, HDPE is a high crystallinity, non-polar thermoplastic resin. The appearance of the native HDPE is milky white and is somewhat translucent in the narrow cross section. PE has excellent properties that are resistant to most life and industrial chemicals.
Q:Spiral drain pipe fittings are not special pipe fittings
1 vertical compression to the outer diameter of 40%, immediate unloading, the specimen does not rupture, not stratified.2, the temperature at 0 degrees, high 1M conditions, with a weight of 1Kg heavy hammer, impact 10 times, should be more than nine times without cracking.3. The inner wall is even and smooth. The water permeable holes are evenly distributed below 1/2 in the height of the trough. The number of holes at the height of the trough is not more than 10% of the total number of 1/2.4, water area is larger than 45cm2/M
Q:The difference between PP-R aluminum pipe and PP-R pure plastic pipe
From the aging resistance performance, aluminum pipe stable molecular structure inner layer outer layer PE apart, allowed to join the enough anti light, anti oxygen stabilizer and does not affect the inner health water contact; PE molecular structure is stable, but the single structure is not conducive to the addition of stabilizer is easy to cause two pollution water pipe: PP-R tube containing tertiary carbon atom most unstable, vulnerable to light, oxygen and impurities and aging.
Q:What kind of flange gasket does the ABS plastic tube work with?
Multipurpose; made of the same material as pipes. Elbow (elbow), flange, three pipe and four pipe (crosshead) and reducer (reducer) etc.. Elbow for pipeline corner; flange for the pipe and pipe interconnected parts, connected to the pipe end, three pipe for three pipe collection; four pipe for four tubes together place; for two pipes of different diameters connected to different diameter pipe.
Q:What tools and methods are needed for the installation of plastic hoses and steel tubes?
(1) quantity. When the storey height is less than 4 m, the riser shall be provided with a telescopic joint on each floor; when the storey height is greater than 4 m, the design shall be determined according to the design expansion amount, and the maximum allowable amount of expansion shall not be greater than the expansion joint(2) site. The construction units often think that as long as the drainage pipe is provided with a telescopic section can satisfy the requirement, even as the expansion joint connecting pipe joints, Water Leakage caused by seepage, the correct approach is socket expansion joint should be set along the direction of flow, when the drainage pipes in the floor below access riser expansion joints should be set under water confluence pipe; when the drainage pipes in the floor above the access riser section should be arranged on the telescopic water confluence pipe; drainage pipes in the floor and upper and lower access, should be located in the middle section of the telescopic floor. At the same time, when the riser passes through the floor as a fixed support, the expansion joint can not be fixed, and when the contraction section is a fixed support, the riser can not be fixed through the floor. A telescopic joint arranged on the transverse pipe shall be arranged at the end of the water current converging pipe fitting.
Q:What are the common connecting methods for plastic PP pipes?
Because the hot melt connection method does not need any additional material, and can melt the connection part as a whole, achieves the body strength, the connection effect is good, therefore, here recommends the use of hot melt connection method. The use of hot-melt bonding method should pay attention to the following: first, the hot melt tool to connect the power supply, to the working temperature, the indicator light before the start of operation; II. Cutting the pipe material, you must make the surface perpendicular to the pipe axis. The general use of pipe cutting scissors or pipe cutting machine, using sharp hacksaw when necessary, but after cutting the pipe section should remove burrs; the PP pipe and pipe connection end must be clean, dry and free of grease; the welding elbow or three pass, according to the requirements of design drawings, we should pay attention to its direction in a straight direction pipe and tube, mark the location with the auxiliary mark the connection, no rotation; the end of the guide tube heating sleeve is inserted into the standard depth, at the same time, no rotating the pipe onto the heating head and reached the prescribed mark; the heating time is reached after, immediately put the pipe and pipe fittings from the heating sleeve and the heating head removed simultaneously, quickly and without rotation inserted into the standard depth, making joints form a uniform flange of the joint can be corrected, but not the rotation; to a prescribed cooling time, will The pipe cover is buckled on the pipe fittings.
Q:When calculating the installation of water supply and drainage pipelines, are elbow and pipe fittings calculated separately?
To calculate the cost of both chambers.. as long as it is in. Including tolls.
Q:Natural gas aluminum pipe, what fittings are best the used?
Plastic aluminum pipe special pipe fittings.The aluminum plastic pipe is a composite pipe which is welded longitudinally by an intermediate aluminum pipe and is lined with polyethylene plastic inside and outside, and is bonded with hot melt adhesive between the layer and the layer. According to the use of classification, there are ordinary drinking water pipes, high temperature pipes, gas pipes.
Q:TTP-PESI hole net steels belt composite pipe fittings need to be taken?
The connection of the hole net, the steel band and the composite plastic pipe can be made by flange connection, and also can be conveniently, quickly and safely welded by sleeve welding. The electric welding is connected with an electric heating element arranged in the pipeline, and the plastic of the inner wall of the pipe sleeve and the outer wall of the pipe (pipe fittings) is melted and cooled after being electrified to generate heat. The joint strength is high, the connecting force of more than 20000 kilograms of pipes and fittings, no leaks and other defects.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range