Q:What are the problems with the surveillance camera?

Wait for you to meet the situation to say it again, I give you answer, you ask the question is like to buy a mobile phone, mobile phone will generally what the same problem. People are so depressed! The The Surveillance cameras, Dongguan Le Pu Electronic Technology Co., Ltd., this is very good!

Q:Monitoring camera 6mm 8mm 12mm 16mm length and width can be according to how much.

At the same time, the same focal length, length and width shooting range also with the camera CCD has a relationship. Charge - coupled Device, Charge - coupled Device. It is a semiconductor device that converts optical images into electrical signals. At present, most of the CCD chip used in the surveillance camera is 1/3 "and 1/4", that is, the target size is 1/3 inch and 1/4 inch. CCD target surface size, CCD and lens with the situation will directly affect the size of the field of view and image clarity.

Q:The VCR monitors how the computer is connected

(1) If it is in a local area network, as long as the hard disk video recorder inside the IP and computer IP in a network section on it. If you want to directly use the network cable can also, the method is the same, the first IP in a network segment, in a cross with the network cable can be connected through IE.

Q:Will monitor the camera should buy much. Room size of 8 meters 7 * 3 meters 3, is expected to use four camera monitoring head. Will the camera to buy much?

The lens can choose 3.6MM, how many lines of their own election it, the higher the more clear, now generally the highest is 700 lines.

Q:How does the surveillance camera solve the backlight problem?

Second, always use the corresponding function of the camera, improve the backlit appearance. There are two kinds of cameras inside the security camera can be better to deal with the problem of camera backlight, one is a backlight compensation function of the camera, one is wide dynamic camera. Backlight compensation, also known as backlight compensation, is the screen dividends of several different areas, each area from the exposure. In some applications, the field of view can contain a very bright area, and the subject is included in the bright field surrounded by a picture of a bleak, no level. At this point because the AGC detects the signal level is not low, so the amplifier gain is very low, can not improve the brightness of the main screen, when the introduction of backlight compensation, the camera only the entire field of view of a sub-region, Area of the uniform signal level to determine the AGC circuit operating point.

Q:Monitor the camera why the black screen?

Third, look at the video terminal whether there is a problem, because the video equipment is not set up or with the inappropriate black screen will appear.

Q:Camera monitor the recorded file 1 hour how much G ah?

Monitor video 24 hours per channel per day Recording space size calculation formula:

Q:Monitor the camera must be a separate threading it?

If it is not strong power will not affect what.

Q:Hai Kangwei as the camera mapping problem

Here the network situation is so drop. A TP wireless router, a fiber cat, a monitor, two computers, and N mobile phones.

Q:Use home computer camera how to install home monitoring?

The first transmission distance monitoring camera installation, generally need to use a few meters to tens of meters ranging from the transmission distance, but in accordance with the provisions of the USB standard, USB device, the longest transmission distance is 5 meters, so USB are Can not use long distance, which is what we use the USB camera to do monitoring the first problem encountered, the camera transmission distance. In fact, USB transmission distance can be resolved, USB can be extended through USB? HUB transmission distance, each additional HUB, you can extend the 5 meters, a total increase of 5 HUB, which is extended 5 times, each 5 meters, so The longest extension of 25 meters. Why is the USB demanding on the distance so strict? This is because the USB signal frequency is very high, the line in the process of transmitting the signal attenuation of the signal is very large, when the signal attenuation can not maintain the normal transmission of the signal, WINDOWS will prompt "to find unrecognized USB device" So the general distance can not be more than 5 meters!