Oil Stone 3000# Grinding Whetstone for Fine Sharpening
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 20000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Oil Stone 3000# Grinding Whetstone for Fine Sharpening
This whetstone is made from corundum material and it's with 3000 grit for good sharpening effects(3000 grit mainly for fine grinding). Use this sharpening stone and sharpen your knives.
Features:
High-grade corundum whetstone ensures effective sharpening results.
3000 grit for fine grinding.
Equipped with silica gel non-slip base, guarantee the safety sharpening.
A perfect sharpening tool for kitchen knives.
Using Instruction:
1. Soak the stone in the water for 5 minutes, and then put it on a steady platform. Hold the knife at an angle of 10-30 °, grind the edge on the surface of stone back and forth with gentle pressure, and sharpen it until the edge sharp enough. General speaking, use it once a week to keep your blade sharp.
2. Please wipe it with wet cloth or rinse it with water after sharpening the tool, and then dry it. Clean the stone surface with a soft brush and put it in the air to make it dry.
Notice:
1. Please use the whole surface of stone to keep the consistency when sharpening knives.
2. Protect the stone well and avoid it falling from the height.
3. Sharpening result would be much better using with sharpening oil.
4. Please put the knife sharpener and knife beyond the reach of children to avoid any accidents.
Specifications:
Material: White Corundum
Grit Type: 3000#
Item Size: 180x60x15mm
Item Weight:277g
Package Size: 22 0x75x25mm
Package Weight: 312g
Package List:
1 * 3000# Corundum Whetstone
Product Show
- Q:Sharpener good, advantages, disadvantages
- Household knife grinder, can be said to destroy the knife, it is best not to use. There are many kinds of home grinder, each has its own shortcomings, grinding, grinding, grinding edge, pick knife type, and so on, the advantages of not much. Excessive grinding and gnawing edge is the most intolerable, good steel in the blade, these two disadvantages, will greatly shorten the service life of the cutter.
- Q:What is the better effect of sharpening and sharpening for the knife
- Should sharpen the knife will be faster to let the knife with sharp, there is a good effect.
- Q:Do you have a Tupperware sharpener?
- Can you imagine corrugated cardboard.You want to fold the cardboard, along the texture is very easy to fold, vertical texture is very difficult.The blade is very easy to wear.And often, a knife, the knife is the best point.It's done.
- Q:What is a sharpener? What is the specific working principle? What are the advantages and disadvantages?
- The machine tool is a tool grinder, such as a high speed drilling machine for processing a printed circuit board, a numerical control machining center, a grinder with a drill bit and a cutter
- Q:Can a Zwilling knife be sharpened by another sharpener?
- Of course, the metal cutting tools are worn out, the difference is that the time of sharpening and the use of the knife itself material hardness.
- Q:Is it possible to use an ordinary whetstone? Will not damage the tool?
- Right, there is a special knife sharpener, or sharpened periodically better, if LZ do it yourself, ordinary grindstone, collocation Zwilling tool is not very good, may also damage the blade, anyway, my family is a special. If LZ does not want to spend money or too lazy to do it, you can go to the counter. Remember, oh, it's free and permanent!
- Q:Enrich the knife sharpener?
- In fact, no matter what the knife, as long as it is good, you can look at the Baidu, Fumin knife factory staff will give you a solution! Hope to help you. Hope adoption
- Q:How do you use the sharpener? How to use
- There will be a knife slot knife on the knife slot on the push and pull a few
- Q:Bought a field survival knife, in the face of trouble grinding, grinding machine can be used?
- Yes, there are a variety of warm knife sharpener, suitable for different knife type
- Q:Sharpening stone and sharpening rod which make
- You have to look at what to do with the edges of open front should use the grindstone three steps in the most thick about 200 mesh or a blade and then use about 500 of the burr and then polishing about one thousand meshes are generally not edged from ordinary knife before two step is enough if you are collecting or play knife appearance and extreme sharpness can add third step if the sharpness of the knife is hard to add a step with ruby grindstone (3000 mesh) and agate grindstone (8000 to 10000).If your knife is paused or just ordinary kitchen knife sharpener with rust. It can only be used for ordinary knife usually use tableware like playing with a knife sharpener, sharpener tube are called destroy knife can only be a few weeks with a knife grinding rust
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Oil Stone 3000# Grinding Whetstone for Fine Sharpening
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 20000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords