Isolation Board
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
1400 ceramic fiber board1.Compressive Strength>=0.5%(Mpa)
2.Theoretical Density:220-500 (kg/m3)
3.Type:HZ ceramic fiber
Technical Index
Name | High Aluminum Ceramic Fiber Board | High Zirconium Ceramic Fiber Board | |
Code | YXTX-434 | YXTX-534 | |
Shrinkage on Heating (%) | 1200×24h≤-3 | 1350×24h≤-3 | |
Theoretical Thermal Conductivity W/(m·k) | (200°Caverage) (400°Caverage) (600°Caverage)
| 0.103 0.125 0.151 | |
Compressive Strength,≥(Mpa) | 0.5 | ||
Theoretical Density (kg/m3) | 220-500 | ||
Moisture Content(%) | ≤1 | ||
Organic Content(%) | ≤8 | ||
Specification (mm) | 1200×1000×10,According to your requirements | ||
Package | Plastic Bags inside, Carton outside | ||
Quality Control System | ISO9001-2000 ISO14001-1996 |
Application
Heat preservation and insulation materials as the back lines for the kilns in the field of cement building
Heat preservation materials as the back lines for the kilns in the field of ceramic
Heat preservation materials as the wall lines and back lines for the kilns in the field of metallurgy and petrochemical industry
Heat preservation materials as the wall lines and back lines for the Glass furnace.
Refractory and insulating materials for heat treatment equipment
The back lines of refractory brick for electrolytic reducing bath in aluminum factoryMaterials of the wall lines and back lines of heat and pyroreaction equipment
- Q:What are the uses of ceramic fiber boards?
- Ceramic fiber board is the main use of heat insulation, fire protection, insulation to use, but also with sound absorption, noise reduction, thermal shock resistance and so on. Ceramic fiber board is mainly used in all kinds of furnace lining insulation, kiln wall lining insulation, metallurgical industry furnace fire, aluminum reduction tank, refractory brick backing.
- Q:What is the difference between ceramic fiber board and nano ceramic fiber board?
- The nano ceramic fiber board through the introduction of nanotechnology, the special production process, product performance has been greatly improved, high strength, low thermal conductivity, good heat insulation performance, energy saving effect is obvious, which improves the safety of the furnace, and in high temperature and high pressure conditions, can also play a good performance the product.
- Q:What method should be used to measure the thermal conductivity of fiberboard?
- It is concluded that the test error of this method and device is about 2%. This filament ultra light aluminum silicate fiber product: the filament ultra light aluminum silicate product is by Shandong Zibo high quality burnt precious stone as raw material, passes through the smelting furnace, the rejection silk, blows the cotton, the auxiliary mold and so on to deliver the work procedure. Therefore, the thermal conductivity of fiberboard is chosen by heat flow meter method.
- Q:What are the specifications of the ceramic fiber board?
- Ceramic fiber board, also known as aluminum silicate or refractory fiber, including ceramic fiber blanket, ceramic fiber, ceramic fiber fireproof plate (plate).
- Q:Ceramic fiber plate and aluminium silicate plate are chosen as lining materials
- Volume density is low: the density of the ceramic fiber lining is about 25% of the lining of the light heat insulation brick, about 10% of the lining of the light pouring material; adopting the fiber lining can greatly reduce the steel structure load of the furnace and prolong the service life of the furnace lining.
- Q:What are the differences between nano ceramic plate and ceramic fiber board?
- The biggest difference between the two is that:1, the coefficient of thermal conductivity is different, the nano ceramic plate is about three times of the ordinary ceramic fiber board2, temperature class is not the same, nano ceramic board maximum temperature of 1050 degrees, ceramic fiber board should be 1400 degrees temperature.3, the range of applications is different. Nano ceramic plate is mainly used in high, fine and sharp technical fields, and has strict requirements on thermal conductivity. Ceramic fiber boards are widely used and can be used wherever there is flame or temperature.
- Q:What are the sound-absorbing fiber boards?
- The theory on the absorption coefficient is the best sound-absorbing board sound-absorbing effect 1 (all suck, no reflections), but in reality, this material does not exist (black holes in the universe are the sound absorption coefficient is 1, which is completely absorbed)
- Q:What are the standards for ceramic fiber boards?
- Ceramic fiber board is made of continuous production, water production line and advanced technology, ceramic fiber board produced with smooth surface, accurate size, good toughness, can be arbitrarily cut, good insulation effect and other performance characteristics.
- Q:Is there any difference between ceramic silicon fiber board and ceramic fiber board?
- Ceramic fiber board is aluminum silicate fiber board, a refractory material. Even after heating, good mechanical strength is maintained. The product is a fibrous insulation product that is rigid and has a supporting strength compared to fiber blankets. Features: ceramic fiber board has excellent quality, toughness and strength, besides, it has excellent resistance to wind erosion. The utility model has the advantages of no heat expansion, light weight, convenient construction, and arbitrary shearing and bending. The utility model is an ideal energy-saving material for kilns, pipes and other heat preservation equipment.
- Q:Refractory insulation board, pressure plate, nano heat transfer plate, calcium silicate board and ceramic fiber board, which is good?
- Sheng Yang series of ceramic fiber board is based on the traditional process of comprehensive upgrading of the excellent vacuum forming insulation materials, slag ball content of less than 3%, fiber distribution uniformity, internal and external strength consistent, size controllable.Ceramic fiber board is made by spraying superfine ceramic fiber through water washing, slag removal, fiber freezing and vacuum forming. The product has superior high temperature resistance, excellent rigidity and toughness.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Isolation Board
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords