High Quality Solar Module for ASG110 Series

Ref Price:
Loading Port:
Shanghai
Payment Terms:
TT OR LC
Min Order Qty:
25 pc
Supply Capability:
10000 pc/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

 

Description:

Solar Module for  ASG110 Series : The product is a multi-purpose solar charger. It has good performance under weak light and high temperature due to the thin-film solar panels inside. The built-in high capacity and high quality rechargeable polymer lithium battery, ensure safety under stronge sunlight. In addition to solar charging, this product also allows fast DC power charging from available DC power of computer and other equipment with USB port.
With all kinds of adapter, the product can be used for mobile phones, digital cameras and other small digital products like iPad for fast charging.

VII Good performance of preventing from atrocious weather such as wind and hails.

VIII Resisting moisture and etching effectively, not effected by geology.

IX The certificate issued by international authority: UL, TUV, IEC, CE.

2. Standard Test Conditions of Solar Module for  ASG110 Silicon Solar Panel:

STC: Iirradiance of 100mW/cm2, AM1.5 Spectrum, and cell  temperature of 25 (77).

NOCT: The estimated temperature of a solar PV module when it is operating under 800 W/m2 irradiance, 20 ambient temperature and a wind speed of 1 meter per second)                   

Maximum power may vary by ±5%, and other electrical data may vary by ±10%.                           

50Hz Full Sine Wave1 cycle, Non-repetitive                           

                           

Installation Specifications                        

Maximum System Voltage                                                            600  V      

Module operating  temperature                                                 40°C to +85°C                   

Temperature Coefficients                        

Open Circuit Voltage                                                                     -0.33   %/      

Short Circuit Current                                                                       0.09   %/        

Maximum Power                                                                            -0.20   %/      

Voltage at Maximum Power                                                           -0.32   %/      

Current at Maximum Power                                                            0.14   %/     

3. Solar Panel Images

 

High Quality Solar Module for ASG110 Series

High Quality Solar Module for ASG110 Series

 

4. Solar Module for ASF110W Silicon Solar Panel Specification

Size(L×W×T)                               

1,400×1,100×6.8   mm

Weight

25.5  Kg

IP Rating

IP65

Connector

MC4

Cable Length

1000  mm

Cable Size

2.5  mm²

Number of diodes

1

Electrical Specifications

Maximum  power (Pmax at STC)

110   W

Maximum power voltage (Vpm at STC)

77     V

Maximum power current (Ipm at STC)

1.42  A

Open circuit voltage (Voc at STC)

99     V

Short circuit current (Isc at STC)

1.65  A

Diode  average rectified output current (Io)

10       A

5.FAQ

We have organized several common questions for our clients,may help you sincerely:

①How about your company?

Hangzhou tianyu light co., LTD. (AmpleSun) is a professional engaged in amorphous silicon and microcrystalline silicon thin film solar cell components
Internationalization of research and development, production, sale and service of high-tech enterprises, is a good example of the emerging industries.The company was founded in early 2008, the project total investment 2.2 billion yuan, a total of the four production lines.
The thin film solar cell production line with annual capacity of 25 mw, has been built 40000 square meters of modern factory and production, the world's leading production line imported from Japan, has a high production efficiency and automation
Degree.By the end of 2011, as the production process from the amorphous silicon to the upgrading of microcrystalline silicon, the four lines of output will increase to 120 mw.

②How to guarantee the quality of the products?

Tianyu light first-class production facilities and raw materials, the internationalization of r&d and design team,
Efficient management model is to provide quality and reliable solar photovoltaic products and energy systems solutions,
In order to meet the growing global demand for energy.

 

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:How do you make a homemade solar panel?
Did okorder.com/ . Possibly this could immediately instruct each and every one!
Q:what is the best solar panels to use on my new house(tube or flat)?
I assume you're talking about heating water. Based on what I've seen, the spiral tubes seem to heat the water to a higher temperature than the flat panels, probably because the water has to follow a longer path and has more time to heat. This type of panel will heat the water to a high enough temperature for almost any household application, but you need to be careful about how you set it up. I once saw a pool that had been equipped with that type of heating system, and it produced enough heat to melt one of the PVC pipes. It was a vertical pipe next to the filter, and it had fallen over onto the ground, pinching off the flow of water. This was in Arizona, so it may not get that hot in your area.
Q:Power Point on solar panels?
Create okorder.com/
Q:Home solar electricity advice? Making the solar panels accessible?
Modern solar electric panels rarely fail. Because of this, if you would be installing them over a roof that only has a few years left on it, it would be better to redo the roof, first. In the unlikely event that a panel needs to be changed, this can be done in 30 minutes or so, because the panels are mounted on racks, with everything simply plugging together. I have never personally seen a solar installation go bad, but from what I hear, the inverter (a box that goes in next to your electric service panel) is usually what burns out after 5 years, assuming the install was done right in the first place. If you were to call roofers to repair your roof, they would somehow be able to get to your roof, by ladders, or a special truck. Solar installers use the same kind of equipment. They won't have a problem getting up there. A solar electric system is actually a very straightforward thing. No matter who installs it, if there is a problem, another installer should be able to diagnose and fix it.
Q:Solar panel for your home?
In the short, a solar panel is composed of many solar cells...all tied together and in some sort of a frame for mounting. When energy from the sun hits it, it creates a reaction which can feed electricity through leads to a converter system which takes the Direct Current power and converts it into Alternating Current. If you rewire your house for DC products I suppoes you wo'nt need the converter. but most of these systems are retro-fits. Batteries provide back up source to the system when the sun goes down. So solar is converted to electricity through the panel, which goes to your solar system which both provides power to the house and to recharge batteries. The batteries take over when the sun is down. So you will need to know how much battery capacity you need by calculating the Amp hour rating of your applicances that you normally use at night like Microwave, TV, radio, refrigerator, etc. For some depending on the appliance....water heater (if electric) or stove) then you need to figure out how many panels you need to provide your normal daily energy use, figure out how many batteries you need, set up a distribution system that gives you what you need where you want it and wa la. Once done, you will be off the grid and paying nothing from the electrical utility. Some places due to deregulations allow you to sell excess power to local utilities too, but those systems need to meet tight standards.
Q:Are solar Panels worth it?
“Where you have good (sunlight) and access to financing and a combination of federal and state incentives, you have a number of markets around the country that are very vibrant, and it’s very cost-effective with financial paybacks in the order of five and 0 years,” said Robert Margolis, a senior energy analyst at National Renewable Energy Laboratory (NREL).
Q:question about Solar Panels?
Assuming that you have / will upgrade wiring sizes to carry the extra wattage, that the new total wattage resulting from the addition doesn't overload any existing charge controller, diodes and / or inverter you have installed, then paralleling it straight into one of the other 2 volt groups should do nothing but add current to the system. True, it will be somewhat imbalanced, but it will work. Your other options would be to reconfigure everything down to it's native 2 V configuration which will raise current and lower voltage, with the additional panel creating the additional current to raise the wattage or to put it in series with the other 4 panel clusters so that you would get 36 V and additional current to account for the raised wattage. One last approach might be to set it up on another battery bank of it's own (small and at 2 V) to then connect to the same inverter. You'd be getting more power and storage capability that way, sort of a partial backup system, really, that will take some of the load off the other components to help extend their useful lives and get a bit more flexibility into it as well. The choice is yours here. That is all the ways that the system can be connected in, assuming everything in the first sentence checks out;-) It's difficult to make a recommendation without knowing what other components are in use and what the maximum ratings they carry are. Just remember that parallel connections add current and voltage stays the same, series connections add voltage and the current remains the same and you can figure out what to do with this thing to help you if you stay within maximum ratings for the charge controller, diodes and / or inverter involved. Good luck and stay safe!
Q:How do passive trackers work (for solar panels)?
It appears to be relying upon a phase change of liquid to gas to liquid to balance the system and return it to the east in the morning.
Q:Should I buy solar panels?
I've done some research in this category, and I came to the conclusion that solar panels are simply too expensive to utilize effectively (at least for me). I was looking into buying them for my house, but I realized how expensive it would be and how little it would help. Maybe for a business it is more reasonable to do, I'm not sure. Either way I wish you luck in your decision, make sure you do your homework and find out everything you can before you go out and buy them. Personally I think if you have a lot of debt, you should try to start paying it down and get it done with. That is just my opinion, I have been studying businesses and economics for years and I believe that the strongest companies have strong balance sheets.
Q:Can you make a Solar Panel Heater?
Absolutely. But I see your point about the Ohms law. I think you'd need technical schematics to get the raw details.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range