high quality 60led/m 2050-2300Lm SMD 2835 led bar light with CE RoHS
- Ref Price:
-
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Description
High lumen SMD 2835 led bar light
LED Aluminum bar , widely used in jewelry, star hotel, high end clubs, museum, professional windows, counters and
other key lighting place, it is an alternative replacement to traditional old halogen and other light.
Product superiority:
1. High brightness, adopt high brightness SMD2835 as light sources
2. Well Radiates, PCB board and Out shell, all made with Aluminum materials, low heat and easy output
3. Low power and less light decay: energy saving can reach into 90% for you
4. Without any radiation, non-UV / Infrared, and heat radiation, environmental friendly
5. Outer covering with aluminum alloy, and surface anodizing,very unique design with high level
6. Install easy, the unique structural desing, easy installation, all person not professional do well
Product Feature:
1. LED type: High brightness SMD2835
2. Color available: Single Color
3. Color temperature: White : 6000~6500K, Warm white:2900~3200K, Cold white: >8000K
4. Viewing Angle: ≥120°
5. LED quantity: 60leds/m,72leds/m,92leds/m.
6. Luminous Flux: 1200~1400Lm/72leds:1400~1600Lm/2000-2200Lm
7. Voltage /Power: 12VDC , 14.4W/17W/22W
8. Waterproof : IP65
9. Working temperature:- 35℃~+60℃
10. Storing temperature: -40℃~ +70℃
Product Picture:
1. Shipping by EMS, DHL, UPS, FedEx, sea shipping and air shipping according to customers' requirement;
2. Normal delivery time: 7-10 working days.
1. Competitive price;
2. Our products are under strcit quality control ;
3. Large producing capacity : 80,000pcs/month;
4. Any quantion willbe replied as soon as possible.
5. Professional LED light supplier with more than five years experience;
1. Your inquiry will be replied within 12 hours;
2. Any question during using ,we always reply in time;
3. All products are tested and packed well before delivery;
4. We will arrange the fast shipping for you;
5. Your private information will be well protected.
- Q:LED lamp installation drawing, which 5050 and 5730 are good?
- 5050 and 5730 lights if manufacturers do, can do a good job, he is just the size and power of the lamp, not the same form of packaging
- Q:LED how to connect the lamp band, 12 volt battery is not damaged
- Direct contact will burn. The three should be connected in series, with 150 ohm resistors in front (power not less than 0.06 watts). Note the positive and negative poles, and the gap is negative.
- Q:How much band wavelength does LED blue light have?
- When electrons and holes are combined, they can radiate visible light, so they can be used to make light-emitting diodes. In circuits and instruments, as an indicator, or in combination with text or digital display. GaAs diodes glow diode gap, green silicon carbide, yellow light diode, light emitting diode gan. Because of the chemical properties and organic light-emitting diode OLED and inorganic light-emitting diode LED.
- Q:Which is good for low voltage lamp belts 5050 and 3014?
- Power connection method: LED lamp belt voltage is 12V DC, so it needs to use switch power supply, the power supply size according to the power of LED lamp belt and connection length to decide. If you do not want to take each LED lamp with a power to control, switching power supply can buy a relatively large power for the total power supply, then put all LED light with all input power in parallel (wire size is not enough, also extended) unified by the total power switch. The advantage is that it can be centrally controlled, which is not convenient. It can not be achieved with the lighting effect and switch control of a single LED light band, which can be measured by itself.
- Q:LED lamp with main lighting, how many watts per meter?
- It's worth speaking a little here! Generally 13 flat indoor use a 40W ordinary fluorescent lamp can, and about 18W LED fluorescent lamp can replace the low 40W ordinary fluorescent lamp
- Q:The difference between LED light band and T5 tube
- LED lamp belt and tube which good _Led lamp band advantages and disadvantages?1, soft, can bend like electric wire;2, shear and extension;3, the bulb and the circuit are completely wrapped in flexible plastic, with good insulation and waterproof performance, and safe to use;4, strong climate resistance;5, not easy to break, long service life;6, LED light band, easy to make graphics, text and other shapes;
- Q:How many watts does the LED light have?
- The band of lights in your picture is high voltage 220V's 5050 meter 60 lamp band. In theory, one meter is 14.4W, but the actual measurement is not so much.
- Q:What's the LED band?
- LED lamp belt price is generally in meters as a unit, cheap 10 yuan or so: quality is more general, can do home decoration, or other use time comparison case use. The quality is better, the quality is about 30~50, and its service life is longer
- Q:What is the power consumption of the LED lamp belt?
- General LED lamp belt, the power per meter is 0603 1.5W, 1210 LED lights with the power per meter is 4.8W, with 5050 LED lamp power per meter is 7.2W. even under the 5050LED lamp power to bring the highest calculated per meter 7.2W, with 8 hours a day, every day for consumption:7.2W*8h=57.6whPower consumption per month: 57.6wh*30=1728wh (1.728kwh, i.e., 1.728 KWH)Power consumption per year: 1728wh*12=20736wh (20.736kwh, or 20.736 KWH)
- Q:LED how is the band embedded in the steps?
- LED is English light emitting diode (light emitting diode) abbreviation, its basic structure is a electroluminescent semiconductor chip light emitting materials, with silver glue or glue curing to the bracket, connecting a chip and a circuit board and then with silver or gold, then sealed with epoxy resin around, to protect the internal core role finally, the installation shell, so the seismic performance of LED lamp is good.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
high quality 60led/m 2050-2300Lm SMD 2835 led bar light with CE RoHS
- Ref Price:
-
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
