CONSTRUCTION:

Backing: Cloth

Adhesive: Hot melt based

Liner: white/ light yellow / dark yellow release paper

white color PE release film

TYPICAL PHYSICAL PROPERTIES:

Thickness (adhesives+cloth): 400 ± 10micron

Thickness (release film): 70micron

Tack rolling ball: <19# (21.5mm)

180° Peel Adhesion to steel: > 18N/25mm

Tensile Strength: 79N/25mm

Elongation: <30%

Temperature resistance: 60C

PACKING:

Core I.D.: 3” (76mm±1)

Jumbo Roll：1.02 x 500m

Packaging：Wrapped with corrugated cardboard.

Cut Roll: roll width 3mm up

REMARKS:

1.     The data above are typical results and subject to change without notice.

2.     Tolerance: Weight and Thickness: ±10%; Width: ±3mm;

Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.

3.     The products should be stored at room temperature and be kept away wet and/or heat source.

4.     It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.

5.     The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.