DC12V Led Strip Light waterproof green 5050

Ref Price:
Loading Port:
Yantai
Payment Terms:
TT OR LC
Min Order Qty:
-
Supply Capability:
1000000 m/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

        1). Product Description:                                                                              

        1).  Products Name: Led flexible strip light,DC12V Led strip light, AC220V Led strip light, etc.

        2).  Input voltage (V): 85-265V AC

        3).  Output Voltage (V): DC12V or DC24V or AC220V, AC110V

        4).  SMD Type: SMD3528, SMD5050, SMD2835, SMD3014, SMD5630, SMD5730,SMD335,

        5).  Power Consumption Per Piece: 0.08w forSMD3528,  0.24w for SMD5050, etc. 0.10wfor SMD2835, or 0.20w for SMD2835,  0.5Wfor SMD5730, etc

        6).  LED Qty per meter: 30 LEDs/m, 60 LEDs/m, 96 LEDs/m,120 LEDs/m, 240 LEDs/m, others available.

        7).  Width: 4mm, 5mm, 6mm, 8mm, 10mm, 12mm widthPCB board,  White PCB Board or Yellow PCBBoard, Black PCB Board, etc.

        8).  Color Temperature (CCT): Warmwhite:2800-3500K, Natural white:4000-5000K, White:6000-7000K, Cool White:8000-15000K, other customized color available.

        9).  Emitting Color: Warm white, Natural white,White, Red, Green, Blue, Yellow, Pink, Purple, RGB.

        10).  Power per meter: 4.8W/M, 7.68W/M, 9.6W/M,3.6W/M, 7.2W/M, 14.4W/M, and others

        11).  Luminous Flux ( Lumens ): 4-5LM/pcs, 5-6LM/pc, 6-7LM/pcs,7-8LM/pcs, for SMD3528, and 11-13LM/pcs, 13-15LM/pcs, 16-18LM/pcs, 18-20LM/pcs,  for SMD5050, etc.

        12).  Waterproof Type: IP20, IP22, IP44, IP54,IP65, IP67, IP68,  Non-waterproof,  PU glue waterproof or Epoxy glue waterproof,  Better silicon waterproof,  Hollow tube waterproof,  PVC tube with silicon inside waterproof,  Phosphor Colourful Waterproof.

        13).  LED Chip Brand: Epistar, Brightlux, we do notuse Chinese Chips

        14).  Chip Pcs: 1 chip, 3 chips.

        15).  Certification: CE-EMC,CE-LVD, RoHS, CCC ,UL, FCC, RoHS, UL, ERP.

        16).  Drive Current Per Piece: 16mA, 18mA, 20mA,58mA, 60mA, 62mA, etc,

        17).  Power Factor: >90%

        18).  CRI (Ra>):80 Ra, others available.

        19).  Operating Temperature (): 40 to +50 degree Celsius

        20).  Life-span (Hour): 30000 ~  50000

        21).  Lamp Body Material: Copper

        22).  Place of Origin: Shenzhen, China (Mainland)

        23).  Brand Name: Kingunion Lighting

        24).  Model Number: KU-3528-5050-60D,  many differenttype of models, please refer to our pricelist

        25).  Warranty: 1,2 and 3 years and 5 years

        26).  Beam Angle: 120 degree

        27).  Packaging Details: 1 meter/roll, 3meters/roll, 5meters/roll, 10 meters/roll, 40 meters/roll, etc,

        28).  Standard export package.

        29).  Light Decay: less than 3% after 1000 hoursconstant work

        30).  PCB Board Color: White or Yellow (Brown)

        31).  Layer thickness: single pcb board, double pcb board.



Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:How much is a band of LED light meter?
LED lamp belt is divided into high voltage lamp belt and low voltage lamp belt, because the low voltage lamp belt each aspect performance is better than the high voltage lamp, therefore the price is also relatively expensive.
Q:5050 per meter, 60 beads, led band power consumption is about how much watts?
The electrical parameters of 5050 beads:1, current: 43-46mA (this is the most ideal driving current); maximum use current can not exceed 60mA;2, voltage 2.8-3.6V (transient voltage not more than 5V beads, or damage or serious damage to the LED lamp to repair);3, the ambient temperature -20 degrees Celsius to +40 degrees Celsius (requirements of thermal design of lamps and lanterns do better, LED lamp pin temperature can not exceed 60 degrees);4. If the current is at 14-20mA, the brightness of each 1mA is reduced by 4%;
Q:One meter band of LED lights. Let me cut it in the middle. Then I found a thread and put it together. Why didn't it turn on?.
The copper sheet inside is actually a flexible circuit board with copper foil wires on it, and the wires of these copper foil should be connected.Do you want to open the plastic pulling off a short, then use sandpaper or knife white copper foil surface insulating layer off exposed copper foil, see a few roots in the position for welding.
Q:The brightness of 220V lights with LED power up before optical switch can adjust the lamp with the LED?
The brightness of the LED light band cannot be adjusted.The high voltage light belt is made through IC or resistance capacitance step-down, and the security is very poor. Easy to cause fire and safety accidents, or use low voltage safety.
Q:Led how much is the price of the lamp?
LED lamp belt is divided into high voltage lamp belt and low voltage lamp belt, because the low voltage lamp belt each aspect performance is better than the high voltage lamp, therefore the price is also relatively expensive.
Q:How to fit the proper driving power for the LED light?
Light color is different, the working voltage at both ends of each 1.5V is different, such as red yellow and green; each 1.8-2.0V; blue and white each about 3.3V
Q:How to make the effect of LED light belt fixed?
The re purchase controller (usually flat 4 line controller 10 yuan), there are generally 8 kinds of adjustable mode, there is something you need to achieve the effect, and a controller with a maximum of 40 meters with lights on the line
Q:What's the difference between LED hard band and LED soft light?
General hard light strip with soft light plate circuit board difference is bigger, a kind of soft, a kind of hard! The hard board is usually the wave board, and the soft circuit boards are mostly FPC boards (which can be folded in half). For light intensity, color temperature and other factors are not very different.
Q:How about the wattage of the hidden LED lamp belt?
With the power to the lamp, light stability, and then with a clip on ammeter multimeter to measure current and voltage in the circuit, lamp with P total =U*I not even out of it!
Q:Where is the difference between the LED lamp belt and the ordinary lamp?
The light emitting principle of LED soft light band is different from that of incandescent lamp and gas discharge lamp,The energy conversion efficiency of LED soft light band is very high, and the energy consumption of incandescent lamp can reach 10% in theory,LED soft light band, compared to fluorescent lamp can also achieve 50% energy saving effect. Energy saving effect is remarkable, which is of great significance to China, which is very energy intensive. The utility model does not contain toxic and harmful substances (such as mercury), avoids the two pollution of the fluorescent tube rupture and overflows mercury, and simultaneously does not interfere with radiation.Besides the optical properties of light, compared with incandescent and fluorescent lamps, 1 LED light less, using a plurality of LED.LED itself so require radiation range with a light emitting area is small, light, with advantages of light in a hemisphere distribution of rotational symmetry, plus lenses and mirrors, can constitute a a good source.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range