Anti-Corrosion Pipe and Pipe Fittings Frp Pipe Fittings
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 20 pc
- Supply Capability:
- 30000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Item specifice
Product Description
FRP Fitting,a wide range of fittings as elbows, reducers, tees, caps, flanges etc. is available.
Fittings are manufactured by the hand lay-up, contact molding and spray-up process. In hand lay-up and contact molding processes veil and alternate layers of mat and woven roving saturated with resin are applied on the mold. In spray-up process continuous strand roving is fed through a chopper gun, combined with catalyzed resin, and sprayed onto the mould surface.
Characteristics
1.High anti-corrosion capability, long designed service time of 20 years;
2. Good hydraulic property, smooth inner surface with absolute roughness of 0.01mm, which is far less than that of carbon steel pipe or cast iron pipe;
3. Lightweight and facility to install and transport;
4. High specific intensity and reliable mechanical performance;
5. Low thermo-conductivity and small thermo-stress, which are allowed to be used in various conditions: exposed buried or suspended, in ocean or in deserts, freezing or humid;
6. Less joints and rapid assembly design: According to concrete engineering conditions, there are a several
ways of connection designed for clients to choose, which include Adhesive-bonded Plug Joint, Adhesive-
bonded End-to-end Joint, Flange Joint, Plug Joint with O-ring Gasket(with key-lock) and Thread Joint etc.
7. Good electrical insulation
8. Not rust, rot or corrode, not permeate, and without consequent pollution;
9. Anti-furring and vermiculate resistance;
10. Flexible design: the pipe can be designed on the shape and function according to its conditions of usage.
Technical data
Stiffness | SN3750 | SN5000 | SN10000 | ||||||
Pressure | 0.25 | 0.6 | 1.0 | 0.25 | 0.6 | 1.0 | 0.25 | 0.6 | 1.0 |
400 | 6.1 | 6.1 | 5.9 | 6.7 | 6.7 | 6.4 | 8.1 | 8.1 | 7.87 |
500 | 7.2 | 7.2 | 7.1 | 8 | 8 | 7.7 | 11.4 | 9.6 | 9.4 |
600 | 8.7 | 8.3 | 8.3 | 9.6 | 9.6 | 9.2 | 12.1 | 11.7 | 11 |
700 | 9.7 | 9.7 | 9.4 | 11.2 | 11.2 | 10.4 | 13.8 | 13.2 | 12.5 |
800 | 11.6 | 11.3 | 10.6 | 12.8 | 12.5 | 11.7 | 15.5 | 15 | 14.2 |
900 | 13.4 | 12.5 | 11.7 | 14.8 | 13.8 | 12.9 | 19.3 | 16.4 | 15.8 |
1000 | 14.6 | 13.7 | 13 | 16.2 | 15.1 | 14.4 | 20.7 | 18 | 17.3 |
1100 | 16.1 | 14.9 | 14.2 | 17.9 | 16.5 | 15.6 | 23 | 19.8 | 18.9 |
1200 | 17.2 | 16.1 | 15.4 | 19.6 | 17.9 | 16.9 | 24.7 | 21.5 | 20.6 |
1400 | 20.4 | 18.4 | 17.7 | 22.7 | 20.5 | 19.5 | 29.2 | 24.8 | 23.8 |
1500 | 22 | 19.9 | 18.7 | 24.4 | 22.1 | 20.7 | 31.4 | 26.3 | 25.3 |
1600 | 23.6 | 21.2 | 20 | 26.2 | 23.4 | 22 | 33.7 | 28.2 | 26.9 |
1800 | 26.3 | 23.5 | 22.4 | 29.2 | 26.1 | 24.7 | 36.4 | 31.6 | 30.3 |
2000 | 27.4 | 25.4 | 23.4 | 35 | 32.4 | 29.6 | 44.7 | 37.3 | 36.1 |
2200 | 29.7 | 27.6 | 25.3 | 37.8 | 35.3 | 32.6 | 48.7 | 41.5 | 40.4 |
2400 | 32.6 | 30.3 | 28.4 | 41.8 | 38.8 | 34.6 | 53.4 | 44.6 | 42.8 |
2600 | 36.3 | 33.5 | 31.5 | 45.2 | 40.5 | 35.4 | 55.8 | 47.2 | 45.6 |
2800 | 39.6 | 36.0 | 34 | 49.4 | 45.1 | 42 | 62 | 53 | 51 |
3000 | 41.0 | 38.1 | 36.2 | 52 | 47 | 45.3 | 67 | 58.2 | 54 |
Pictures
- Q:What kind of material does glass steel ship honeycomb board use?
- Is an aluminum honeycomb core, with hexagonal type 3003 aluminum honeycomb core, aluminum foil thickness 0.04~0.06mm, length 5~6mm, the roll forming technology to complete the front and back skin forming, automatic folding machine, front and back skin in the mounting side tightly bite.
- Q:What are the materials used in smoke exhaust pipes?
- According to the current national standards: ventilation pipe exhaust pipe material selection of steel pipe (steel), galvanized plate (Bai Tie) smoke pipe, the exhaust pipe exhaust pipe, exhaust pipe, stainless steel pipe, plastic glass smoke exhaust pipe, composite sandwich insulation board, industrial exhaust pipe exhaust exhaust pipe.
- Q:What are FRP pipes?
- The glass steel base material and reinforcing material composition, because of different base material we have called GRE, some called GRP, the matrix material is generally resin reinforced material is glass fiber, adding other raw materials in the production process to obtain more excellent performance, such as adding graphite or carbon fiber can be obtained antistatic, using phenolic resin as matrix material, can obtain very high temperature resistant ability, can withstand instantaneous temperature of 3000 degrees celsius. The glass steel pipe in recent years in the shipbuilding industry is very popular and special attention, such as ship oil tankers, chemical tankers, offshore platform and ship ballast system, at the request of foreign shipowners in the use of glass steel pipes and fittings, its advantages in addition to the static electricity can guide, there are many advantages. Such as light weight, FRP pipe the same general size is only 35% of the weight of the steel pipe, is resistance to seawater corrosion, general steel and glass pipe manufacturers can promise: 50 years. Its disadvantage is that the pressure can bear the bottom and the modulus of elasticity is low. But it's enough in the ballast system. The GRE tube is better than the GRP tube in tensile strength and pressure resistance, so some people refer to the GRE tube as the high-pressure FRP pipe.
- Q:Galvanized steel sheet and inorganic glass fibre reinforced plastic pipe are calculated according to this norm or norm
- According to the project of quota valuation mode, input the actual quantity according to the quota item number, the following materials will automatically adjust the quota quota project, has been considering material wastage, when engineering calculation does not need additional.
- Q:How can FRP tanks be connected to steel tubes?
- Glass tube and carbon steel pipe connection, at present, the most reliable way of connection is only flange connection, other such as on-site bonding, because the two kinds of material is not the same, the quality is not very stable after bonding!
- Q:Glass fiber reinforced plastic pipeline to do anti-corrosion?
- Itself is a corrosion resistant material, no need for corrosion protection
- Q:How to improve the compressive strength of waste glass fiber reinforced plastic profiles (such as square tubes) should be started with resin, curing agent, glass fiber or other aspects!
- Using reinforced materials of good quality, reinforced materials without alkali glass fiber are used;
- Q:FRP duct material plan is how to mention?
- Multi plan square, but also according to the combination of site and construction drawings, to see how much
- Q:What is the heat preservation of the plumbing pipe now? I'd like to use fiberglass Seek help from a master
- I think that you can use magnesium aluminum silicate pipe because this product is suitable for oil pipeline and pipe insulation insulation general insulation are using the products and for foam asbestos products no pollution of construction
- Q:What are the main materials used for steel pipes?
- The ventilation pipe in the industrial and construction projects, mainly related to application: purification system of electronic industry clean workshop, purifying system of medicine and food aseptic workshop, hotels, hospitals, shopping malls and office buildings factory of central air-conditioning system, industrial pollution control, dust, oil and smoke exhaust pipe, industrial environment or position by giving comfort the wind pipe, coal mine gas drainage system, gas pumping for coal mine environment control air supply system and so on..;
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Anti-Corrosion Pipe and Pipe Fittings Frp Pipe Fittings
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 20 pc
- Supply Capability:
- 30000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
