Q:The door is wooden, but the door frame is metal (I found out when the screw wouldn't go in no matter how I hammered it). Is there a way to install a hasp to put padlock on? (Are there screw drivers for metal surfaces?) Or is there any other way to have the door locked without having to installing a cylinder lock?

The metal door frame is heavy gauge steel. There are 2 ways to do this. #1. Purchase a 1/4-20 tap and a # 7 high speed steel drill bit. Mark the location of your holes for the hasp on the steel door frame. Drill holes with the #7 bit. Run the 1/4-20 tap into the hole slowly and straight - back out the tap after every couple of turns to clean out the holes. Keep running the tap in and out until you are all the way through the steel. Now purchase some 1/4-20 hex head machine screws and install in the holes. #2. Purchase some self drilling screws hex head ( these screws have a drill point on the end of them). You do not need to pre-drill holes for these screws. Simply run them in the hasp holes. Use like a #8 or #10 self drill screw with a hex head probably 3/16 or 1/4 hex head. This is the easiest of the two methods.

Q:What should the inspection of the glass door? The door frame is the metal door frame is also our installation, it should use what inspection batch?

In the "construction construction quality acceptance of a unified standard" GB50300-2001 Appendix B construction engineering division project, sub-project division which is not installed inside the glass doors and windows are doors and windows installed, which is different. Suggestions are still done as required. According to the special door to install the project to do the inspection batch.

Q:Looking for dealership

Dealers wanted for Hallow Metal Door . A Mumbai based Engineering Pvt. Ltd Company, manufacturing all type of metal doors, with the 'Best in fabrication Industry' technology. The company has strength of over 60 employees and caters to some of the most respected corporate clients in India. As a part of there Expansion program, company is wishes to appoint Dealers .

Q:What is the difference between a composite door and an aluminum alloy door?

Solid wood composite door The door of the solid wood composite door is mostly made of pine, fir or imported filler material, and the external density board and solid wood veneer are made by high temperature hot pressing and sealed with solid wood lines.Generally advanced solid wood composite door, The door is mostly high-quality white pine, the surface is solid wood veneer.Because the white pine density is small, light weight, and easier to control the moisture content, so the finished door weight are lighter, not easy to deformation, cracking. In addition, solid wood composite doors But also with insulation, impact resistance, flame retardant and other characteristics, and the sound effect is basically the same with solid wood doors. Steel and wood composite doors The door is made of steel plate after a molding process, and then with the solid wood frame and within the filler compound is not easy to deformation, but also pest control; moderate steel doors afraid of scratches, once scratched, make up the paint looks not complete. Resistant to wear. Aluminum alloy door is made of aluminum alloy, waterproof, solid wood composite door steel and wood composite doors used in the gate and the room, aluminum doors used in the balcony door

Q:Does it have something to do with power windows and locks? Im only considering the Sahara trim level since I hate the plastic wheel well covers of the other trims, but this would be a serious concern if I end up considering purchasing one.

By wheel well covers do you mean flares? If so, the ones on the Sahara are also plastic, they're just painted to match the metal body. You should be able to swap doors though. I've heard of a guy who did it with a 2007 unlimited. I think it cost him about $4000 to get everything he needed to swap the doors.

Q:What are the characteristics of red apple aluminum doors and windows?

Never heard of red apple aluminum windows and doors! But aluminum doors and windows are good!

Q:i really cant find the asnwer someone help its for homework

Lowri the only doors that do this are fire doors And these have a quick release handle to open them No other door should lock by itself

Q:also have 2x8s to frame it.

Assuming your door is pre-hung, measure the jamb width (not the molding attached to the face of the jamb). Add 3 1/4 inches for your 2x8 lumber, ( you did buy treated didn't you?). Add another 1/2 inch for room to plumb the jamb in the opening. (I'm afraid you have to go back to the store to buy shims...get some great-stuff for doors and windows while you're there.) Measure height of door jamb. Add 1/4 inch for leveling. Mark wall using level. Cut blocks with concrete saw you rented while you were out buying shims and great-stuff. Pray wall doesn't tumble down on your head, ( You did remember to consult a qualified engineer. It's much better if you pay them to take the blame when things go wrong.) Fill voids in wall with mortar or cement. Tapcon treated 2x8 to opening using a generous amount of liquid nails I forgot to tell you to buy. (Back to the store again...you actually had tapcons and a hammer drill?). Finally...the door. Get out your six foot level and your three foot level. Shim bottom of door on hinged side about 1/4 inch. Plumb hinged side up shimming as needed. level across top. Plumb down other side. Use shims behind every screw. (You did buy screws). Fill voids with great-stuff. Caulk. Paint. Lightly oil hinges. Enjoy :)

Q:a metal entrance door swings freely in the winter, but when the weather turns warm, the door sticks and seems too big for the door frame. Using your knowledge of the particle theory, explain what is happening.

The door is made of metal and the frame is probably made of wood. Metal expands more than does wood when it is warm, so the metal door actually gets bigger and tightens up in the frame. From a particle theory perspective, the metal door expands more than does the wooded frame because its particles are closer together and pushes other particles more as they move or vibrate more and faster as they get warm.

Q:Aluminum alloy doors and windows production line need what equipment how much money

See how you want to produce, simply more than twenty thousand can.