Windows And Blinds
Windows And Blinds Related Searches
Windows And Blinds Supplier & Manufacturer from China
Okorder.com is a professional Windows And Blinds supplier & manufacturer, offers integrated one-stop services including real-time quoting and online cargo tracking. We are funded by CNBM Group, a Fortune 500 enterprise and the largest Windows And Blinds firm in China.
How to deal with the lower part of the aluminum window frame
- Commercial houses are generally installed after the window is delivered, there is no such problem. Commercial housing is generally only installed outdoor door, the indoor door is not installed, so the installation of outdoor door, you can consider the owner of the renovation of the 4cm or so no longer increase 5-8mm to install, so even if the owner of the decoration than 4cm Affect the door frame or high or low, causing the rainy season to the room overflow.s
Do you have the order to install the floor and window? What order is it right?
- Usually the first to do masonry, the installation of doors and windows frame, in the plaster, and then do floor, the final external wall paints
Rough leveling how to use?
- 1. The wall should be measured before construction to determine the thickness of the wall leveling layer, if the wall flatness is very good, you can reduce the leveling layer thickness, do not have to worry about whether the material can meet the strength, because the rough leveling construction thickness from 5mm to 50mm are suitable. 2. Determine the thickness of the leveling layer should be in the wall for the elevation of the line, the spacing between each tendons in the 1.2-1.5m or so, according to the experience of the construction workers to determine the vertical arrangement of tendons from the corner position in turn arranged. 3. Base surface requirements solid clean without powder, no sand, no peeling, surface attached debris, oil should be clear, the hole should be pre-filled. 4. Check whether the doors and windows frame is securely connected and fill the gap between the door frame and the wall with a good "paste". 5. Adjust the "slurry" should be within 30 minutes on the wall, in the grass-roots first scratch scratch again, the purpose is to make the material and the grass-roots contact between the full. 6. And then on the wall approved enough to adjust the "slurry" with 2m long by a one-time scratch can be. 7. Indoor pillars, the location of the corner of the wall should increase the angle, the height of not less than 2m.s
How to deal with the door frame and the wall connection
- The door frame is connected to the wall. In the installation with a styrofoam to the wall and the door frame fixed, and then covered with window lines.s
Aluminum door frames and walls must be left between the joints?
- Direct contact with the wall, according to reason that is not standardized, but the problem is not a long time easy to deformation only thermal expansion and contraction of the truth should know Oh if there is no way to Minatos
What are the key points for the production and installation of wooden doors and windows?
- 2, the first fixed hinge side, to be close can not have a gap, up and down and left and right vertical, with screws or gun nails fixed; 3, door sets and the door frame pressure can not exceed 0.3mm, the line in the saw 45 ° angle when the corner to be straight, if burr, sandpaper sanding after the fight; 4, after installing the door, check whether the two sides are equal, the door is too large or too small , Some to open and close the page must be the first amount of accurate size, before processing, assembly page when the screw to play straight, lock to be firmly flush; 5, good product protection.s
Would you like to be able to paste mosaic?
- Most of the southern region can paste mosaic, the problem is not big!s
Four-wheel positioning adjustment screw how to install
- Four-wheel positioning requires tilting and pulling rods. Adjustment screw, extensive application of oil refining. Chemical. Car. Ship. Medical. Food. Packaging. Light industry and other mechanical equipment in the control system. Door frame adjustment screw, which is an easy-to-process, combined door and window frame adjustment screw consisting of a screw sleeve with a screw, which is provided with a longitudinal slit for said The first staples of the rear end of the screw are passed through the first-order hole of the screw sleeve, and the first-order hole is elastically deformed to expand its aperture so that the catching flange passes The front end of the first step hole is located at the front edge of the first stage hole and the rear end flange of the rear end of the screw is limited to the rear hole of the first stage hole, whereby the structure Easy, quick assembly of progressive benefits.s
what color is granite
- Granite is a relatively hard stone, so it is often used to make the floor or furniture,the color of granite in different places is not the same.What color is granite？Let's ge...
how to lock sim card
- There are a lot of people asking how to unlock the SIM card,but few people ask "How to lock sim card?". How to lock sim card?Before answering this question, let's get...
what is basalt used for
- What are composite doors？Basalt is a kind of high-quality traffic building stone.Especially in the construction of highway, railway, port, airport runway,it is one of the best co...
How to become a construction Project manager
- Construction project managers combine their expertise in engineering and management to deliver projects on time and within budget.They prepare work schedules;manage a team that inc...
Architectural style of construction companies in london
- Construction companies in london specialize in the construction and construction of the new, expansion, renovation and removal and other related activities. There is no doubt that ...