Greenhouse Sheeting Related Searches
Greenhouse Sheeting Supplier & Manufacturer from China
Okorder.com is a professional Greenhouse Sheeting supplier & manufacturer, offers integrated one-stop services including real-time quoting and online cargo tracking. We are funded by CNBM Group, a Fortune 500 enterprise and the largest Greenhouse Sheeting firm in China.
What static eliminator is the best for large production equipment of geomembrane?
- 3024-L remote static eliminator is the best. The highest working voltage of the production equipment can reach 180KV. Otherwise, the quality of the products will decline seriously. So it is of great importance to eliminate static which can avoid the interference to production. At the place for reeling after dividing and cutting in the production equipment, the voltage of static electricity can reach 10KV which can be reduced by this eliminator.s
What is the insulation film?
- In fact, the real effect of the insulation film is thermal insulation. In winter, it can resist the heat indoor to go out. That is to say, if there is a heat source, the insulation film can help to improve the indoor temperature 2-7 centigrade. In summer, since the outdoor heat is too much, so the insulation layer can resist the heat go into the indoor and reduce 2-7 centigrade of the temperature. Because in winter, the heat source is transferred in the form of infrared ray, and the insulation layer can work as this function. So in winter, to paste the insulation film can keep thermal. According to statistics, a more than 100 square house can save up to 30% on heating bills.s
How to deal with the white edge of sticking the film?
- 1, if it is a model film, the bubble in the corner is due to the dust, you can sticke out by the dedusting paster. If there is no dedusting paster, you can use the tape to stick it out. 2, if it is a universal membrane, there is a white edge in the cutting membranes, the reason is that the knife edge is not sharp enough to damage the adsorption layer. 3, the quality of the film itself.s
What are the differences of seepage-proof membranes, geomembranes and waterproof membranes? Can they be used together?
- Seepage-proof membranes are mainly used in the waterproof control of civil engineering, are also widely used in municipal public sectors and highway engineerings, especially are commonly used in the slope protection; geomembranes are seepage-proof membranes with geotextiles as main materials.s
which is better for wall waterproofing coating ?
- how do you think the recently popular wall decoration? as for the exterior paint coating, it should refer to the high coating painting, the following are the advantages of high coating: 1, the coating has good flexibility, excellent resilience, low temperature flexibility and crease resistance. 2, excellent weather resistance, stain resistance, resistance to Sassafras wash, waterproof, and good gas permeability. 3, strong adhesion and anti-alkani performance, water-based environmentally friendly , non-toxic, tasteless. 4, it can create a variety of different styles of dreamy effect under various construction tools. 5, exterior texture coating with excellent adhesion and hiding power; 6, exterior texture coating can effectively bridging wall small cracks; 7, wall texture paint coatings is good in flexibility, impact resistance; 8, strong texture, rich and expressive. If you have more questions, you can click on the ID consultation. as for the decoration, you can look and ask the Xiangshan decoration, decorating can be as long as the combination of interior and exterior decoration.s
Is black HDPE geomembrane eco-friendly?
- Raw material of HDPE geomembrane is HDPE particles, adding carbon black to become black. It is buried underground to prevent hazardous liquid leakage. So HDPE geomembrane can be considered as environmentally friendly.s
What's the installation method of the soft film ceiling?
- Installation method: 1. First to go to the site to see if there is a condition of installing the keel: Look at the scene to check if the wall is completed, and whether the woodworking processing part is qualified, the plastering needed parts should be completed first. Special attention should be paid to the carpentry part of the requirements we have to do, lights, air vents, such as the size of the opening to be processed in advance. 2. If the on-site situation is permmited, the first is to fix the aluminium alloy keel according to the requirement of the drawing design. The corner must be flat smooth, and the lighter should be flat and dense. 3. Pay attention to the lamp holder, air port, and light tube plate that need to be on the same level with the aurrounding keel. And it is required to be stable and smooth that can not swing. 4. The smoke and ceiling lamps should be first positioned and make a wooden frame with a smooth surface. Pay attention to the level, if it is too low, it is easy to highlight the traces of the underframe. 5. Before the installation of smallpox, the joint of the keel should be carefully checked, and the spray header should be sticked with the white tape. And the outlet should be handled well. When installing the smallpox, it should be fixed from the middle to the sides. Pay attention to both sides of the size, and the welding seam should be straight to the final corner and the surface should be smooth. After the surrounding is done, the excessive smallpox should be removed. To achieve the perfect side effect.s
Does the mobile phone stick the tempered film or ordinary film?
- The tempered film 1: Because the bezel of NOTE3 protrudes the phone screen a little bit, the use of the film can just level off the bezel, it feels good. Here I suggest that you buy a 0.3mm film, it is not the thinner the better, because the bezel of our phone is not flat like the other mobile phone frame, so they hope the thiner film. Sticking the thicker film on the note3 film can protect the screen and 0.3mm film levels off the bezel. Second is mentioned above. Because the hardness of tempered film is relatively high and thickness is not thin like the ordinary plastic film. As long as it does not fall down strongly, the glass film should can protect the screen. After all, the thickness has a sense of reliability. Thirdly: A lot of people do not put the phone in the bag, but only in the pocket. You always trouble that you always accidentally pressed to the HOME key to accidentally open your phone and consume the power when your phone puts into the pocket. After you posted the toughened glass film, the film height is slightly higher than the home key, so it does not appear to mistakenly touching the Home key. Although it is higher, I personally didn't feel inconvenient in operation. Pressing the HOME key is easy. And it never appeared to mistakenly open the phone. Fourth: The hardness of glass film is higher than the plastic film, so it never appear all of the scratches on the screen.s
Mount the furniture corner guards on the table
- Mount the furniture corner guards on the table,it can let us use it safely.The present era, more and more people began to pursue fashion,their demand for goods is more and more hig...
Have you done your business with aluminium composite panel manufacturers
- Aluminium composite panel are usually used at building construction, houses, but also at some factories in this field. Have you ever heard of aluminium composite panel?Features of ...
How to lock sd card
- Do you know how to lock sd card? Smart phones play an important role in our daily life and work, especially for high-end people, smart phones are playing an important role in diffe...
how to fix door closer
- The new door closer is in use for a week to 10 days，you should check all the screws, and retighten again. Please use the hydraulic oil recommended by the manufacturer.For cold ar...
What's the price of aluminium composite panel
- Aluminium composite have many advantages than other composite componets such as low Density,strong strength ,good dimensional,stable stability, high plasticity, added components im...