Q:Do not know the size of FC208 bearing seat, know the speed to answer, thank you

The size is 300*500. FC208 refers to the spherical bearing, UCF208 refers to a set of spherical bearings, shaft bearing seat.Bearing seat: turntable bearing pedestal is a kind of large and super large bearing seat which can accept the combined load and structure. It has the characteristics of compact construction, quick rotation, convenient maintenance and so on. It is divided into split bearing block, sliding bearing seat, rolling bearing seat, bearing seat with flange, outer spherical bearing holder and so on.

Q:Why should the bearing seat of the generator be insulated?

Generator work will produce greater axial current, and the bearing due to the role of oil film will be partial insulation, the accumulation of shaft voltage will puncture the oil film, so prevent the axial current is too large, burn bearings.

Q:Punching bearing block

Steel plate punching bearing seat. The utility model is mainly used for the outer spherical surface bearing and has the supporting and fixing function. South Korea JIB brand agent, available in stock (including stainless steel seat)

Q:What is the fitting clearance between the bearings when they are installed?

The inner ring of the bearing is in interference fit with the shaft, and the outer ring of the bearing is in interference fit with the hole. Fit clearance according to table of standard bearings. Bearings are standard parts.

Q:What is the UCP bearing seat, what are the characteristics?

Upstairs answer basic accurate, more questions can refer to Ji'nan Tengfei bearing sales center

Q:Will the installation of bearings in the bearing seat, bearing and gland need to leave the expansion gap? Bearing running temperature 70 degrees.

The question is not comprehensive, bearing no single, double installation: one is killed, the bearing outer ring and the gland crushed, with a round nut on the bearing inner ring and shaft; the other end of the bearing axial movement, the outer ring of the bearing gland to leave the expansion gap, but the bearing inner ring and shaft with a round nut crushed, which is commonly used the configuration, tapered roller bearings can disassemble the bearing on this end.

Q:Which bearing housings should I use for the T318 and 6310 bearings?

T318 can also use UK318+H23186310, you can also use 1610, lighter than SN310, more affordable

Q:What is the danger that the gap between the outer ring of motor and end bearing seat hole is too large?

The gap between the outer circle of the motor bearing and the end cover and the bearing housing will cause the shaft of the motor to cause radial sway and axial movement. The motor will vibrate when it is running, which will seriously affect the balance and life of the motor coupling or pulley. The wear and tear of the motor bearing support gradually increased, and the rotor sweeping fault occurred. Motor bearings are liable to damage.

Q:Urgent! What are the product features of the bearing housings with outer spherical bearings?

Overall characteristics, ah ~ ~ ~ is that they are all bearings! Ha ha......Joking, your question is really difficult. The answer is trickyWell, do not buy on the.Characteristic1, can be more bearing high load and high precision performance (compared with tape)2, the bearing seat is a reasonable automatic self-aligning structure and the most appropriate fit3, high sealing performance4, grease easy to add5, high performance, high strength bearing box, so that the bearings will not affect the abnormal load, and extend the life of bearings.6 、 easy to install and useGive him a break, little brother Muzi

Q:Who has the specifications and dimensions of bearing housing P205?. What bearing does it fit inside?

P205 bearing housings are equipped with UC205 outer spherical bearing sets of sizes 25*114.3*36.5*105*34.1*30