Waterproof HDPE Geomembrane for Landfill to Prevent the Waste Water

Ref Price:
Loading Port:
Qingdao
Payment Terms:
TT OR LC
Min Order Qty:
10000 m²
Supply Capability:
500000 m²/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Structure of Waterproof Hdpe Geomembrane for  Landfill:

Geomembrane is a kind of waterproof material with basic raw material of high molecular polymer. It is mainly divided into LDPE geomembrane, HDPE geomembrane,  and all kinds of composite geomembrane.

Main Features of Waterproof Hdpe Geomembrane for  Landfill

  • Complete variety of specifications of width and thickness. Thickness: 0.2-2.0mm.

  • Excellent environmental stress resistant cracking performance.

  • Excellent performance of chemical erosion resistance.

  • Big scope of application temperature and long service life .

  • Low Permeability :HDPE lining systems are secure because leachate does not penetrate them Methane gas will not escape from the HDPE cover system .and rainwater will not infiltrate. 

  •  Chemical Resistance:HDPE ,resistant to a wide range of chemicals ,is not threatened by typical solid or hazardous waste leachates.It is also suitable for sludge and secondary containment  around chemical storage facilities 

  •  Ultraviolet Resistance:HDPE's resistance to UV exposure is further enhanced by the addition of carbon black .Additionally ,with the absence of plasticizers ,volatilization is not a problem .

Waterproof Hdpe Geomembrane for  Landfill Images

 

Waterproof Polyethylene Geomembrane with Colorful for Pond 

Waterproof Polyethylene Geomembrane with Colorful for Pond

 

Waterproof Polyethylene Geomembrane with Colorful for Pond

Waterproof Polyethylene Geomembrane with Colorful for Pond

Waterproof Hdpe Geomembrane for  Landfill Specification :

Thickness

Width

Length

Remark

0.5mm

5.8m ( Standard )

50m - 400m

The standard width is based on the max loading 

quantity according to the container size . 

Its will be loading more quantity to save Freight cost . 

 

 

 

For other types also could be produce as request , 

the exact package will send to you driectly . 

7.0m

50m - 400m

7.5m

50m - 400m

8.0m

50m - 400m

1.0mm

5.8m ( Standard )

50m / 100m / 150m

7.0m

50m / 100m / 150m

7.5m

50m / 100m / 150m

8.0m

50m / 100m / 150m

1.5mm

5.8m ( Standard )

50m / 100m / 140m

7.0m

50m / 100m/ 140m

7.5m

50m / 100m/ 140m

8.0m

50m / 100m/ 140m

2.0mm

5.8m ( Standard )

50m / 100m

7.0m

50m / 100m

7.5n

50m / 100m

8.0m

50m / 100m



FAQ: 

1. How about the delivery time?    

    Two weeks upon receipt of down payment. 

2. What kind of payments do we accepted?   

   T/T, L/C, WesternUnion, MoneyGram. 

3. What's are the MOQ?   

    Normally the MOQ is 5000 SQM in theory. 

    And we can provide you free samples for quality inspection.  

4. Do you charge for the samples?   

    Accordeing to our company policy, the samples are freee, we only charge the freight fee. And we will return the freight fee in your second order.   

5. Can you produce the product according to customers' requirements?

     Sure, we are professional manufacturer, OEM and ODM are both welcome

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Is it good to use wall decoration film when decorating the house?
In terms of environmental protection, compared to other interior decoration materials, side effects of wallpaper on human health are the minimal. However, as a raw material, the wallpaper is a single product. It should not be forgotten that varnish and wall paper adhesive are painted before the wall paper is laid. At that time, form of the wallpaper has changed a lot. After the wallpaper is paste up, the adhesive is covered behins the wallpaper, making the formaldehyde difficult to volatile, so the release cycle of formaldehyde in wall paper is relatively longer than in wall paint. Wall paint also contains formaldehyde, but construction procedures are relatively fewer than that of wallpaper. In comparison, after the latex paint is brushed, the formaldehydewill be bascially volatile in three days and have no smell left after 15 days.But another type of pollution, mercury and lead, existed in wall paint.After the walls are painted, some children will touch them with the hand or are used to sucking their fingers. In this way, mercury and lead in paint will have an impact on the their body. Europe and other developed countries also considered the paint as the best choice for interior decoration as early as forties and fifties, but the paint is barely used now.It is seen from the above that both wallpaper and wall paint have their own environmental problems.So, on the one hand I do not recommend you to lay wallpaper all over the house; on the other hand, we also have good reason to choose wallpaper as the effect it creats can not be reached by wall paint.
Q:What are the differences of white and black geomembrane?
Different functions: Different densities, typically the black one is HDPE geomembrane.
Q:welding specifications of composite geo-membrane.
①lap joint: lap joint width shold be 15cm; ② hot welding: Suitable for thicker geomembrane weld lap width of the substrate to 5CM. (Recommended bonding, soak the glue in water, poor seepage-proof effect.) digging the base into protective layer of mortar in the bottom of the lake(H20-30mm), slope cutting, dense and smooth composite geomembrane and vertical bulkhead, smooth pasted base surface, clear, step transfer of water pipe mouth sealed with sealing geomembrane laying welding and repair welding procedure handover quality acceptance, completion and acceptance of a high-level design: About 0.6m 2, waterproof construction total area is about 800㎡ 3,ceramsite brick built bulkhead, 4, collapse pit set by water
Q:How to install the electric heating film?
1, Cleaning the ground and paving the extruded sheet of 2-3 cm thick. 2, Tailoring and laying the electrothermal film side by side according to the requirement. 3, Connecting the electric heating film parallelly (according to the standard construction connection drawings, single electrothermal membrane should not exceed 10 meters). 4, Using special tool to connect firmly the special clips with the electrothermal film metal loading bar and connecting the electric wire. 5, Wrapping connected parts with insulating plaster to prevent water and ensure insulation. 6, Allocating the air switch according to the total power, connecting the thermostat and sensor and putting the probe of the sensor probe into the area of the ground that is the easiest to be heated to prevent the heating film from being overheated. 7, adding the drive pipe to the sensor, cutting the drive pipe at the head of the sensor and sticking the sensor to the heated carbon strip of the electrothermal film with insulating plaster. 8, Checking it. 9, Wrapping the electrothermal film with waterproof cloth (for cement construction) or paving non-woven fabric (for floor or the floor sheet construction). 10, Starting the temperature controller to measure the temperature. 11, paving the geothermy plastic net, pouring cement mortar, inlaying floor tiles (cement construction) and paving the floor (floor construction) 12, The construction is completed.
Q:How to install soft membrane ceiling in conference room?
Step 1 of soft membrane ceiling installation in conference room: 1. In accordance with the requirements of design drawings, fix a circle of supporting keel (batten or steel pipe) around the place to install soft membrane ceiling. (See construction design drawing).Note: in some large places, you need to install by block to achieve good results. In this case, you need to add batten in between. This depends on actual situation. 2. When all required battens are fixed, install and fix aluminium alloykeel of soft membrane ceiling in the bottom of supporting keel. (See construction design drawing) Step two: 1. When all installation of aluminum keels of soft membrane ceiling are fixed, install soft membrane. First open soft membrane and heat sufficiently and evenly with dedicated heater, then insert the soft membrane into aluminium alloy keel with dedicated slotting tool, and finally cut the surrounding spare soft membrane. (See detailed construction design) 2. After installation, use a clean towel to clean soft film smallpox.
Q:What national standard does geomembrane material conform to? ?
T17643-2008 implementation, implement according to design requirements if the design party has specific requirements; if not, implement according to the requirements about geomembrane in national standard GB/as mentioned above
Q:What is the DIY method of sticking the film?
1, use a small sticker to stick the old film, do not use fingernails to dig in order to prevent scratching the screen. 2, use a wiping cloth to wipe the screen in one direction, and clean up the fingerprint and the edge of old film. 3, use the electrostatic stickers to paste the screen in a large area, and remove the small dust or floating hair on the screen. 4, film carefully lift a corner of the protective film of a new film, align at the screen, uncover slowly and paste along the side. 5, There will be some bubbles after finish sticking the film, use the wiping cloth to evenly wipe the bubbles with forces until the bubbles are squeezed out; if there is the bubbles due to the dust, and continue to use the stickers to gently lift where there will be dust, use electrostatic stickers to suck the dust, and then the film is pasted, and the bubbles are squeezed out. 6, the above steps are completed, the other side of sticker of the film is peeled off, you should be careful not to uncover the mobile phone film. To be completed, use the mirror wet tissue to wipe the screen, the whole process is completed.
Q:How many kinds does the films of glass door?
High transparent ceramic materials: glass film processed into nano particles deposited into; that adhere to the highest transmittance and the maximum can absorb solar energy. This type of film reflectivity is very low, the insulation is attributed to the high rate, high power in the world of commodity. Called IR type heat reflective film. Usage: glass film metal function layer after interlayer or magnetron sputtering plating skills made, with the intention to reach many reflected solar radiation heat and light. Heat reflective glass film has outstanding shading function and heat insulation function, make indoor light soft and comfortable. The one-way perspective: the glass film metal function layer through the interlayer or magnetron sputtering techniques the plating is made, with the highest reflection of solar radiation and visible light function. Facing the light side with mirror characteristics, the opposite perspective. This can appearance reflective layer mirror effect and color of the building Decoration effect of good, namely, one-way perspective type with reflection translucency and pleochroism. Perspective: that adhere to the high transparency, but also cut off from the inevitable heat from the sun, is modern buildings throughout the use of glass membrane type. Widely used in commercial and residential buildings.
Q:Is there any need to install screen protector on Vivo mobile phones?
It is OK to not install screen protector on the phone. Now the quality of screen protector (light transmittance and other indicators) at the street is poor and is harmful to the eyes. There is no need to install screen protector on middle and high-end mobile phones (such as vivo cell phone).
Q:What are the advantages of geotextiles?
They are easy to use. It is hard to block the apertures of geotextiles because the net structure of geotextiles has excellent adaptability and movability. So geotextiles have good water permeability. They can form drainage channels inside the soil mass. Impervious geotextiles have excellent water permeability, filterability and durability. They are widely used to construct railways, highways, stadiums, dams, water conservancy facilities, tunnels, coastal mud flats and for environmental protection. Geotextiles can be divided into two categories, namely the staple fiber acupuncture non-woven geotextile and film yarn woven geotextile. Geotextiles have excellent breathability, water permeability, acid resistance, alkali resistance, worm resistance and oxidation resistance. Geotextiles can improve the strength of extension and deformation resistance, efficiently disperse, transfer or resolve the concentrated stress to protect the soil mass from damage of external force. So they can improve the stability of the buildings and the quality of soil mass. Geotextiles can be divided into three categories according to craft, namely the filament geotextile, woven geotextile and singeing geotextile.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range