Waterproof 24V RGBW Flexible Led Strip 4 Colors in 1 Led 120leds

Ref Price:
Loading Port:
Payment Terms:
Min Order Qty:
10000 m
Supply Capability:
500000 m/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Waterproof 24V RGBW Flexible Led Strip 4 Colors in 1 Led  

 Item: BL-FB-5050-RGBW-420


24V RGBW Led Strip Specfications: 


Product nameRGBW Led strip
Part number                      BL-FB-5050-RGBW-420
Inpute Voltage DC12V/24V
Rendering Index>80Ra
Working Temperature-20+60°C
Humidity<85< span="">
Power Factory>93%
Brightness420x20 lm
Lumen decline<2% Per 1000hs
Dimension width:12mm  length:5m/reel 
LED quantity84 LEDs/m


24V RGBW Led Strip Features:


 1.Use the super brightness SMD5050 LED chip as as lighting source.
· 2.420 super brightness 5050 LED/5M. 
· 3.Size:5000X12MM 
· 4.Available RGB+W(2700k-6500k)
· 5.Input Voltage :DC12V/24V
· 6.Max power :100W
· 7.Can be cut by 6 LEDs and connect again by our accessories.

. 8.This 5050 led strip can be changed into waterproof with type A-silicone tube IP65, type B-PU glue.

24V RGBW Led Strip Parameter:



Waterproof 24v RGBW Flexible Led Strip 4 Colors in 1 Led   

24V RGBW Led Strip Advantages:


1) Continuous length flexible LED light strips
2) 5 meters/roll, cuttable every 5cm

3) Runs on 12-volt systems like solar cell charged batteries
4) Super bright SMD top LED

5) Solid-state, high shock or vibration resistant
6) Major reduction in power costs

7) 120-degree wide angle illumination
8) No RF interference


24V RGBW Led strip pictures:



 24V RGBW Led Strip Application:


1.Architectural decorative lighting


2.Arshway,canopy and bridge edge lighting


3.Amusement park,theater and aircraft cabin mood lighting


4.Emergency hallway lighting


5.Stairway accent lighting


6.Auditorium walkway lighting 


7.Concealed lighting 


24V RGBW Led Strip Packing:


Waterproof 24v RGBW Flexible Led Strip 4 Colors in 1 Led


Our certificates:

Our showroom and we were at Hongkong Lighting Fairs:


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:How do you control the two LED lights with a remote control?
Don't know what you mean, just buy a double control of the remote control switch can.
Q:What are the LED patch bands, single panels and double panels? What's the difference between them?
There are many types of PCB boards, but common ones are single panels and double sided panels. A single panel is a circuit with copper plating only on one side of the board, and there are both sides of the double sided board, but the circuit on both sides can be connected by passing through the hole so that the board becomes a complete circuit.
Q:What's the light belt? What's the use of the LED light?
Is a lamp with a long light, like a rope, soft, can be put into various shapes, a long time ago, the lamp strip is generally used in the park, outside the building, bridge, signs, neon lights for indoor decoration or worse appearance. Now the lamp with LED lamp do, so called LED lamp belt. The lamp belt can be used for external use or indoor use.
Q:How about the short circuit when the LED lamp belt is installed?
LED is the abbreviation of diode emitting light English, its basic structure is a electroluminescent semiconductor chip light emitting materials, with silver glue or glue curing to the bracket, connecting a chip and a circuit board and then with silver or gold, then sealed with epoxy resin around, to protect the internal core function, finally install shell so, the seismic performance of LED lamp is good. It can work in a high-speed state. If the energy saving lamp starts or closes frequently, the filament will blacken and soon break down, so it will be safer. It uses ultra bright high-power LED light source, with high efficiency power supply, more than 80% of the traditional incandescent Lantern Festival, the same power, brightness is 10 times that of incandescent lamp. Reduce line loss, no pollution to the power grid. LED use cold light source, glare is small, no radiation, no harmful substances in use. The working voltage of LED is low, and the DC drive mode is adopted. The ultra low power consumption, the electro-optical power conversion is close to 100%, and the energy saving is over 80% compared with the traditional light source under the same lighting effect. The environmental benefits of LED are better. There is no ultraviolet and infrared in the spectrum, and the waste can be recycled without pollution or mercury. It can be touched safely. It belongs to a typical green lighting source.
Q:LED lights with 80V induction, string, how many ohm resistance?
Generally speaking, LED lamp with power is 1210 4.8W per meter, i.e. constant current per meter is 0.4A, LED lights a few meters with the load current and so on; LED lamp with power is 5050 7.2W per meter, namely constant current per meter is 0.6A; 0603 LED lamps with power is 1.5W per meter, namely constant current per meter is 0.125A.
Q:LED how to distinguish between good and bad?
1, look at solder joints. Regular LED lamp manufacturers with LED band produced by SMT patch process, with solder paste and reflow process produced. Therefore, the solder joint on the LED light belt is relatively smooth and the soldering capacity is not much, and the solder joint is in arc shapeThe FPC pad extends to the LED electrode. However, the solder joints of the LED lights in the Shanzhai version are not uniform, and most of them appear as a dot to weld the feet. At the same time, there are different degrees of tin tip, which is a typical phenomenon of manual welding2, look at the quality of FPC. FPC points of copper and rolled copper two kinds, copper plate copper is protruding out, look carefully, from the pad and FPC connection to see. The rolling copper is closely connected with FPC, and can be bent at any time without the phenomenon of pad falling off. If the copper plate is bent too much, the pad will fall off and the temperature will be too high to cause the pad to fall off.
Q:LED light is still a weak light after the switch is closed. What's the matter?
Induction of the earth by an induction conductor. You can change two wires
Q:5050 per meter, 60 beads, led band power consumption is about how much watts?
Current is 0.12W at 43-46mA, 0.15W at 46-53mA, and 0.18W at 54-60mA;According to these parameters, the power consumption per meter is: 0.18*60=10.8W.
Q:What do you mean by "LED" belt model 5O5O and 3528?
If you use LED lights with the product, you need to take into consideration the number of SMD beads per unit length is much, we often say that the meter is 30 or 60 or 72 lamp lamp lamp. Of course, the color classification, and single LED brightness value etc.. Answer so much, I hope you have more understanding of this product.
Q:How long should the length of the KBL608 rectifier band be connected to the LED lamp band?
Determine the operating current of LED, that is, the power of LED, in the LED circuit, select the working voltage of LED. You must determine whether your power supply is a constant current power supply, if the current application of normal power supply output current you much more than LED light belt, so you can easily be light with aging as a super power, and damage.

1. Manufacturer Overview

Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range