Q:Comparison of plexiglass steel bridge and inorganic glass steel bridge

Organic glass fiber reinforced plastics and inorganic glass fiber reinforced plastic properties of one, plexiglass resin (referred to as resin) advantages: 1, good toughness; 2, high strength; 3, waterproof performance is good; 4, light weight. (the weight of inorganic glass of the same size is about 1.2 times of that of plexiglass) and the disadvantages of organic glass fiber reinforced plastics: 1. Not high temperature resistant. (in general, the temperature is 70 degrees Celsius, it has begun to deform) 2, no aging resistance. (affected by ultraviolet light, easy to deformation, fade) 3, easy to burn.

Q:How do you make the glass, please? What is the raw material?

When you look for information, the proportion of raw materials is very important.

Q:Tile selection, paving process

The base should be clean, irregularities to chisel and repair, base should be clean, not a mortar, especially lime mortar, oil, and water wet ground.When laying stone or ceramic tile, standard blocks shall be placed. Standard blocks shall be placed at the intersection of cross lines and diagonally installed.Paving operation to each line in line, the stone must be soaking wet, dry wipe back.

Q:How is the glass made?

The shape of each vessel is irregular. It is shining like a holy lotus under the light. It was introduced that the vessel was blown through a wooden mold. In the 30s of the last century, Artaud also successfully designed many glassware, this free form of utensils is still in production, has become one of Artaud's masterpiece.

Q:What's the price of 0.85mm thick plexiglass, please?

Joint venture material is better, about 600 or so, I personally think that the choice of joint venture board is still ideal.

Q:What is the difference between acrylic board, lotus board, organic board and PVC board?

Lotus board (also known as Teflon plate) lotus board single sided composite PVC foam board, ABS lotus board, acrylic panels, ABS surface can not be used for outdoor. Furong sheet is a new kind of chemical material. It is made of polyethylene as main raw material, adding various auxiliaries, and has been formed by chemical bridge foaming, and the single side composite PVC board.

Q:How can glass frosting be formulated? What raw materials do you use?

Preparation of water-based environment-friendly frosting liquid, according to the A Group 8, B group of 2, the proportion with 5 copies of the preparation of tap water (25kg water frosting powder add 12.5Kg, preparation of tap water) according to the proportion of A group and B group into a plastic bucket, then according to the proportion of entering tap water (if prepared with 80 degrees above water could shorten the curing time more than half) with plastic (or bamboo sticks) stir until evenly, liquid will be prepared to cover seal, so that in the outdoor temperature under natural curing for 24 hours. The newly formulated frosting is thicker and the temperature drops. After ripening, the viscosity and temperature of the liquid can be restored to normal. When the preparation amount is large or the weather is cold, the aging time should be prolonged appropriately.

Q:What are the materials for car windshields? Is there anything different than ordinary glass?

Prospects: glass technology has now completely penetrated the automotive industry, becoming an indispensable part of the automotive technology field. Although China is still the automotive industry such as glass and glass industry (BSG) belong to two different areas of the industry, the former belongs to the machinery manufacturing industry, which belongs to the light industry, but from the development of the car, the relationship between the two is more and more close. Nowadays, people always study and develop automotive glass from the perspective of automobile safety and appearance, and introduce new varieties.

Q:The benefits of natural thin wood planks

Sheet metal products, flat appearance, thickness ratio, surface area per unit volume is large, the shape features bring its use characteristics: (1) a large surface area, so the inclusive coverage ability, have been widely used in chemical industry, container, construction, metal products, metal structure; (2) can be arbitrary cutting, bending, stamping, welding, made of a variety of products, flexible and convenient use, occupies an extremely important position in the Department of automobile, aviation, shipbuilding and tractor manufacturing; (3) bending, welding into all kinds of complicated section steel, steel tube, steel I-beam, large pieces of the structure, it is known as the "universal steel".

Q:What are the main raw materials for making ceramics, glass and cement?

The main raw materials for producing ceramics are clay (such as Suzhou soil), quartz, feldspar (potassium feldspar and albite)