TC5613 Tower Crane Building Construction Tools and Equipment
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
TC7021 12T construction used tower crane for sale
Product Description
Descriptions of our tower crane:
1, TC7021 have competitive price and excellent quality, suitable for all kinds of construction project and can work under all kinds of work condition. With their working radius from 2.5 to 70m, TC7021 tower cranes are famous for their large operating ranges, varied working methods and wide uses.
2,This series of tower cranes has a horizontal jib frame, a jib-trolley radius-changing mechanism and a hydraulic self-raising mechanism.
3, It is original in design, reliable in operation and satisfactory in shape.
4,Equipped with all necessary safety devices, these cranes show a good speed-control capacity,, satisfactory operating stability and high work efficiency.
5,They are widely applied for the construction of high-rise hotels, resident buildings, high-rise industrial buildings, large-span factory buildings and tower like buildings like tall chimneys. Best after sales service will be offered which will get rid of all your worries in the purchase of our products
Advantage of our tower crane:
1, boom relief Angle is big, greatly widened the equipment capacity and scope of work.
2, suitable for the group of tower cross homework.
3, boom stability is good, combination amplitude range.
4, suitable for height have special requirements occasions construction.
5, lifting capacity big, effectively solve the high steel structure construction team crane big lifting capacity requirements.
Independent height (m) | 50 | ||||||
Max height with attachment (m) | 200 | ||||||
Working range can be adjusted(m) | 40/45/50/55/60/65/70 | ||||||
Min working range(m) | 2.5 | ||||||
Max lifting capacity(t) | 12 | ||||||
Tip load @ 48m(t) | 2.1 | ||||||
Hoist mechanism | Falls | 2 | 4 | ||||
Lifting capacity(t) | 0-3 | - | 0-6 | 0-6 | - | 0-12 | |
Speed(m/min) | 0-80 | - | 0-40 | 0-40 | - | 0-20 | |
Motor | YZPBF250-4-55W | ||||||
Trolleying mechanism | Speed(m/min) | 0-56 | |||||
Motor | YZPBE132M-4-7.5KW | ||||||
Slewing mechanism | Speed(r/min) | 0-0.6 | |||||
Motor | YLEW112M-6-120.N.M X2 | ||||||
Climbing speed(m/min) | 0.5 | ||||||
Counterweight(t) | 23.6 | ||||||
Mast section size(L×W×H)m | 2.0×2.0×3.0m | ||||||
Working temperature | -40-+60°C | ||||||
Total power (KW) | 95 | ||||||
Power supply requirement (KVA) | 190KVA for generator | ||||||
Cable type ( within 30 meters from site power source to lower electric box of tower crane ) | 50mm2(3+2, 5 cores) | ||||||
Startup voltage & current | 380V×95%=361V 219A | ||||||
Rated working voltage & current | 380V 146A
| ||||||
About CNBM:
1, CNBM is the biggest state-owned company which has had been awarded Qualified construction machinery manufactures and most of the big project are using our products.
2, CNBM possess key technical research department and could design & produce special machinery for international clients.
3, We have had passed ISO9001:2008,CE and etc.
4. The successful long-time construction machinery operation in the world testifies that the CMAX products' performance is stable.
5. More than 10 overseas branch office provide immediate commercial convenience and after service.
6. We also has building hoist, suspended platform, formwork, etc. We also signed the strategic partnership with Tadano (China), XCMG, Zoomlion, Sany and other prestigious crane manufacturer, getting the competitive cost price from them, and using our overseas marketing channel to promote their brands. We can provider a series of equipment for your building company customer and supply a basket scheme for the final users.
7. We have built a cover 50,000 square meter logistic park in, Dubai UAE, will be a great guarantee of our business in middle east and nearby area.
FAQ
1. why chose us?
China National Building Materials (Group) Corporation (CNBM), established in 1984,now is one of the largest state-owned group corporation in China, dealing with building materials & industrial equipment. Up to year 2010, CNBM Group's total asset is 20 billion USD and total staff is more than 100,000.CNBM International Corporation, specializes in designing & manufacturing of various
kinds of construction machinery, including tower crane, building hoist, etc. All the equipment produced by CNBM are compliant with the National level quality standard, and wins great reputation for their endurable performance in worldwide markets.
2.How about the shipment?
You can put 2 sets of of wheel loaders in one 40HQ container. The spare parts are packed with boxes.
The delivery time is 20 days.
3. What about your service?
We have our factory, we can meet customers needs as soon as possible.
We have first rate professional technology and provide good after-sales service.
4.After Sales Service
We offer the Preventative Maintenance and After Sales Service. For we strongly feels about the importance of supporting our customers and the product solutions we provide. Consequently we offer comprehensive maintenance options to prevent equipment issues before they become problems. Also we offer one year guarantee period.
- Q:why does the power company use helicopters to service the repair lines instead of trucks with tall cranes?
- High-tension lines operate at hundreds of thousands, or millions, of volts. At this potential, electricity can jump through several feet of air to reach a path to ground. This pretty much rules out using trucks, because it would be prohibitively expensive or impossible to build a crane out of entirely non-conductive materials. A helicopter is electrically isolated from the ground, so it's less difficult to drop a technician off and let him hang from the line itself while working. (It is still necessary for the technician to use a wand to bring the helicopter to the line's potential before starting work, because of the capacitance of the helicopter's body.) They could of course use a truck to service the lines if the power was disconnected, but the cost of shutting down service to an entire region of the country exceeds the operating cost of a helicopter.
- Q:How many meters of cranes should be in accordance with the anemometer?
- Tower crane type test items, technical requirements and test methods provides that: Boom root hinge point height of greater than 50m tower crane, should be equipped with anemometer. When the wind speed is greater than the working limit wind speed, the alarm can be issued to stop the operation. The anemometer shall be installed at the top of the tower without the wind.In fact, this is also the requirements of the type test rules for tower cranes and the safety technical specifications for crane overload protection devices.The answer is recommended dogmatism, mainly because the standard setters do not understand the actual situation of the construction, and not the outdoor crane need, need only part of crawler crane and tower crane installation, as the case may be other.Welcome to the emperor student - lifting expert Sina blog, my blog is committed to the dissemination of hoisting safety and professional knowledge.
- Q:Is tower crane a tower crane?
- Yes, the tower crane is commonly known as the "standard" in the industry. It is called tower crane.
- Q:single shard pls need awnser quick 8th grade lit test
- wise, caring, lighthearted courageous survivor Assuming you've read the book , you'll need to find examples to prove these characteristics.
- Q:The role of slewing limiter in tower cranes is limited
- The function of the rotary limiter is to limit the large arm to a certain set stop. Protect from turning to danger settingThe function of the amplitude limiter is to restrict the car to come out or return somewhere to stop and protect the car from or within certain dangerous range.The hook safety device is to prevent the wire rope from falling out of the big hook, so as to avoid falling and other dangerous events!
- Q:Like I know he's the head gamemaker, but i mean seriously, madge is MUCH more important than him. i know he let k/p live, but still......madge did more than him?
- Seneca Crane was the game maker of the 74th hunger games and let two tributes win aka Katniss and Peeta. Seneca Crane was the executed because of that because the capitol felt like having two tributes win was a defeat for the capitol because it showed that the capitol lost control and therefore can't completely control everything..which was what all districts were used to at the time, or at least until Katniss and Peeta 'rebelled'. From a film aspect, Seneca Crane is important because they might use him to advance the plot and Crane might also be a huge transition piece from the first movie to the next (since he was kind of the reason for fueling the flames of the rebellion). I LOVED Madge too, and I am not entirely sure why they left her out, though she seemed important in the book she really wasn't. She only gave the symbol of the rebellion and helped Katinss here and there, but she wasn't really a plot advancing character...I mean anyone could have helped Katniss and given her the mockingjay...most likely Cina will be giving her the pin in the movie because he is Katniss' stylist. TEAM PEETA RULES!!!!!!!
- Q:Preferable short poems or phrases in Chinese.
- this one is about cranes We thought they were gulls at first, while they were distant- The two cranes flying out of a natural morning, They circled twice about our house and sank, Their long legs drooping, down over the wood. We saw their wings flash white, Frayed at the black tip, And heard their harsh cry, like a rusty screw.
- Q:Tower crane 4 how to change the rate of 2 magnification, how to change, say detailed points
- There is a magnification pin on the hook group. When the magnification pin is removed, the pulley will automatically slide to the lifting trolley.
- Q:for example: erection, technical data...
- Well now Slartybardfast may be tried lol but he is correct give him the points lol.
- Q:What is the definition of lifting, slewing and luffing of tower cranes?
- Rotary is cantilever tower crane tower crane rotary shaft winding;Is the hook shaft distance amplitude change;
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
TC5613 Tower Crane Building Construction Tools and Equipment
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
