Smoked Polycarbonate Sheet Polycarbonate Mirror Sheet
- Loading Port:
- Ningbo
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m²
- Supply Capability:
- 1000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Description
Material | 100% virgin bayer or sabic |
Color | Clear, Lake blue, Opal ,green,yellow, ect. |
Thickness | 1.2-15mm |
Max width | 2100mm(can be customized) |
Length | 5800mm,12000mm,11800mm,6000mm or can be customized. |
Warranty | Usually 10 year's quality guarantee which depends on the models you ordered. |
Product specifications
Item Name | polycarbonate solid sheet | Specific gravity | 1.25 |
Material | polycarbonate | Application Temperature | -40 °C ~+120 °C |
regular Size | 1220*2440mm | Impact Strength | 850J/m |
regular Thickness | 1-15mm | Light transmission | 88% |
Color | transparent/clear | Heat Conductivity | 2.3-3.9 W/ m2°C |
Application scope of Polycarbonate solid sheet
1. roofing for swimming pool, shopping malls, commercial streets
2. sunshade for stadiums and bus stops, gazebo, open air carport
2. lighting canopy for corridors, passages and subway entries
3. flashing for bank ATMs, telephone box, gateways, garages
4. sound and heat insulation wall for expressways and houses
5. instead of glass, decorati
- Q:PC sun panels and color steel plate how to bond
- Sun panels and color plate need to have two corrugated width of the stack, the use of sealant at the same time, with self-tapping screws fixed on the purlins. Such a practice to meet the requirements.
- Q:Sunshine board price per square meter, PC sun board how much money a square meter
- Thickness 16mm - 40mm, the price is generally 80 yuan - 260 yuan / ㎡, this interval thickness of the PC sun panels generally use less, but also a variety of shapes. ? Global PC sunshine board prices are different.
- Q:Can the sun board bend?
- Different types of sun panels have different degrees of curvature. For example: the general car roof, rain roof there are many shopping malls outside the elevator channel that circle. If you are talking about it, it is not possible.
- Q:Who can tell me, plastic hollow board and PC sun board in the end what is the difference?
- Compared with the PC sun panels, it has the following advantages: The price is cheap, it's only one-third the price of a PC sunshine board. ?? Plastic hollow board for the software structure, roll packaging can be transported, saving shipping. Veneer area, the largest can be made 200m2 each (100 meters long × 2 meters wide). Easy to install greenhouse, greenhouse low cost. Long life, more than 10 years of the greenhouse is still in use.
- Q:How to correctly identify the quality of pc sunshine board and pc durability plate method
- Pull the protective film to see the sheet. Particles or bubbles are relatively small or relatively small, indicating that the recovery of raw materials, but is a good back to the material, this board is the middle grade plate. Such as bubbles and particles more or larger, indicating that the poor raw material, this board is a low-grade plate. If the civilian particles or particles rarely, that the quality of the sun plate is very good, is ten years of quality.
- Q:What is the difference between sun panels and plexiglass?
- Sun panels are generally hollow, plexiglass is solid. There is one side of the sun is anti-condensation, one side is anti-ultraviolet. Plexiglass on both sides. Sun panels can be exposed directly to the outside, and plexiglass generally can not accept direct sunlight.
- Q:What are the differences between plastic endurance boards and sun panels?
- Color: transparent, blue, green, creamy, brown, gray.
- Q:Which friends know how to remove the plastic film on the sun?
- In the PC sun panels and accessories installed when fixed, it is best to tear the protective film 30mm to 50mm, this is to avoid the accessories to suppress the protective film pressure. But should pay attention to is not too much to expose, or easy to install the operation because of scratching the sun plate.
- Q:Pc sun panels and frp lighting board what are the two differences
- Frp lighting board is translucent glass fiber material used in the top of the translucent lighting state price advantage. Two products sunshine board advantage beautiful and environmentally friendly non-toxic pollution-free, frp advantage of low cost See what kind of project you use, how many squares your area.
- Q:PC sunshine board, what material, what kind of good
- Sunshine board mainly with light weight, weather, super, flame retardant, sound insulation of the excellent performance, so that we build greenhouse and the canopy and the top of the quality of light, we choose to use the sun can be based on their own practical use Need to choose
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Smoked Polycarbonate Sheet Polycarbonate Mirror Sheet
- Loading Port:
- Ningbo
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m²
- Supply Capability:
- 1000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords