Resilient seated centerline flanged butterfly valve DN40-DN1800
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 10000 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Technical Date:
Size: DN40-DN1800
Nominal Pressure: PN10/PN16
Operation Temperature: -10°C~150°C
Suitable Medium: Water,Sewage,Seawater,Gas,Food,Oils,etc.
2. Standard
Design Standard: GB/T 12238-2008
Structural Length: GB/T 12221-2005
Top Flange dimensions: ISO5211
Face to face dimensions: GB9112,DIN2501,BS4504,ISO2084,ANSI125
Type of connection:Flanged type
3. Feature:
This valve is mainly composed of body, butterfly plate, valve shaft, seat and transmission devices. Simple and compact structure, small portable, convenient for transport, install and dismantle. 90 degrees of opening and closing, switch quickly, operating is small, light energy; Sealing performance is good, service life is long, can achieve zero leakages. Flow curve tending to straight line, excellent regulation performance.
4. Sealability:
The valve for rubber seal, closing butterfly plate and seat sealing performance is good, two-way sealed good performance and the torque is small. the friction is very small between butterfly plate and the seat seal. The valve shaft drive the butterfly plate, butterfly plate do 90 degrees rotation. Butterfly plate flexible for opening and closing, no card acerbity, beating phenomenon, small torque.
- Q:Butterfly valve switch direction respectively?
- If it is not to sound from behind, from large to small if that is in the open.
- Q:Which is more expensive, gate valve or butterfly valve?
- Same diameter, the same material, with the pressure level, the weight of the gate valve is much heavier than the butterfly valve, about 2 times of the butterfly valve!
- Q:What does butterfly valve nps12cl150d373f4-150lb stand for?
- NPS (Nominal, Pipe, Size) abbreviation. Refers to the connection (including flanged and welding end) of the nominal diameter, followed by a digital unit is American Standard inches, 12 inches.NPS12 labeling system.CL is the abbreviation for class, and LB150 means the pressure is 150 poundsD stands for butterfly valves3 is expressed in the form of a turbine drive7 means of connection: to clip3 means sealing: 3 eccentricF4: the sealing material is PTFE
- Q:What type of valve does the butterfly valve D343X DN300 represent?
- General valve model specification:D: butterfly valve3: worm gear4: flange connectionX: rubber sealDN300: Valve path 300mm
- Q:What is the meaning of the D341*5-10 / 16ZB1 turbine butterfly valve flange said?
- D: for clamp, 3: turbine head 4: flange connection 1: vertical plate X5: Ding fine rubber 10/16: nominal pressure Z: gray cast iron valve body, B1: valve plate material is ductile iron
- Q:D37A1X9-16CB1: what does this butterfly valve mean?
- The model is composed of 7 units, the types of valves (gate valve Z, J, L, Q ball valve, throttle valve, check valve and H valve, butterfly valve, connection mode (D) internal thread 1 thread 2, welding flange 4, 6, 7, the clamp (0) electromagnetic transmission mode 1 solenoid valve, hydraulic, electric and hydraulic turbine are 2, 3, 4 and 5 gears, bevel gear, pneumatic hydraulic, 6, 7, 8, 9) pneumatic and hydraulic, electric, structure (straight or DC type 7,1 on behalf of the center plate, vertical type A (A) and LT X9) on behalf of a sealant is heat-resistant rubber, kg 16 kg, C represents the body material of carbon steel WCB, B1 on behalf of the valve plate is made of ductile cast iron plating)
- Q:The water supply pipe is the gate valve And on the cross dry pipe are the gate valve? To answer the 30
- I suggest you find out the pressure and installation position first, the condition allows, you can choose butterfly, after all, much cheaper than butterfly valve. After the completion of the project, will be mainly engaged in the acceptance of problems, there are special management of fire units.
- Q:i was changing valve seals and two dropped i can see the head of the valve but a magnet wont pull them up i put air the spark plug hole too but no luck 1985 ford bronco II
- The valve head is larger then the valve port, so it's not coming out of there. Pull the head.
- Q:My quot;check engine soonquot; light came on yesterday and soon after that I took it to the nearest Midas to have the diagnostic test run on it - they stated I needed an ERG valve. I have no clue what it is and was told that it could run $160. - $300. for my 1900 Astro van. what is an ERG valve? I have noticed that my van has a low humming sound when I'm driving it.
- EGR stands for exhaust gas recirculation. It recirculates your exhaust gases back into the combustion chamber to lower temperatures and NOx emissions. This valve commonly gets clogged with carbon due to the fact it's recirculating exhaust gases. If the diaphram is not broken or damaged and still works, frequently you can simply remove the EGR valve and have the carbon cleaned out. It's a dirty job, but can be done if you can get to the EGR valve. If you do need to purchase the part it typically runs about $175. Labor charges will depend on where it's located.
- Q:What's the difference between D71X-16 and D71H-16 butterfly valves?
- D71X-16 and D71H-16 butterfly difference is that the cut-off is not the same, the latter is stainless steel seal, corrosion resistance, friction, acid or impurities can be medium fluid. The former is rubber sealed, only through the general temperature of the medium, not acid, with more, you can ask Luoyang crown Ning
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Resilient seated centerline flanged butterfly valve DN40-DN1800
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 10000 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
