QY12D Truck Crane
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Brief Introduction
Max. lifting capacity is 12000kg, Max. torque is 600/1200~1600 N.m/r/min. The main boom in hexagonal cross section, the length full extended is 9m, and the length full retracted is 22m. The length of the jib is 7m. Front and rear outriggers are in H-type, which could offer large outrigger span. The chassis of the truck crane is Dongfeng, and engine is Tier III. All the oil tanks adopt the imported seals, and the hoist system adopts the variable speed type with grooved drum, driven by high speed hydraulic piston motor through winch reducer. Adopted the planet rotary speed reducer the rotary system equipped with the controllable slip and automatic hoist function. The crane adopts the lattice rotary table, rear amplitude hinge point and the new type of the arc-shaped sliding doors for the cab of the superstructure, which could provide nice appearance, high performance and high efficiency.
Specifications
Specifications | QY12D | ||
Performance | Max. rated capacity (kg) | 12000 | |
Max. lifting torque basic jib (kN·m) | 420 | ||
Max. lifting torque | 267/145 | ||
Max. lifting height main boom (m) | 22.9 | ||
Max. lifting height auxiliary jib (m) | 30 | ||
Turntable tailswing radius (m) | 2.47 | ||
Speed | Max. speed main winch single line (m/min) | 110 | |
Max. speed auxiliary winch single line (m/min) | --- | ||
Time full extended / retracted (s) | 25/30 | ||
Luffing time (s) | 21/35 | ||
Slewing speed (r/min) | 0~3.4 | ||
Outriggers telescopic speed | 15/20 | ||
Traveling | Max. traveling speed (km/h) | 85 | |
Max. gradability (%) | 28 | ||
Min. turning diameter (m) | 21 | ||
Min. ground clearance (mm) | 260 | ||
Approaching / Departure angle (°) | 34/13 | ||
Fuel consumption per 100 (L) | ~21 | ||
Quality | G.V.W (kg) | 14795 | |
Front axle load (kg) | 4795 | ||
Rear axle load (kg) | 10000 | ||
Size | Overall dimension (L*W*H) (mm) | 9900×2490×3290 | |
Outriggers footprints longitudinal (mm) | 4200 | ||
Outriggers footprints horizontal (mm) | 4800 | ||
Main boom (m) | 9~22 | ||
Main boom elevation angle (°) | -2~78 | ||
Auxiliary jib (m) | 7 | ||
Jib installation angle (°) | 5 | ||
Chassis | Model | EQ1161FLJ | |
Engine | Rated power kW/(r/min) | 118/2500 | |
Max. torque N.m/(r/min) | 600/1400~1600 |
- Q:What is the difference between a crane and a crane?
- Cranes are specially used for hoisting machinery, hoisting machines with cranes (also using hoisting chains), bridges and gantry cranes for industrial production. There are also mobile cranes, floating cranes, crawler cranes
- Q:What are the safety procedures for truck cranes?
- 2, the construction, in case of heavy rain, heavy snow, fog and more than six winds affecting the construction safety, should stop lifting work, and the arm down to a safe position.
- Q:How many car cranes are there?
- Crawler Truck Crane is a crane that is specially developed for a crane. It usually has a large tonnage of several hundred tons
- Q:What are the parameters of the QY35 truck crane?
- Rated power kW / (r / min) 235/2200 Engine rated torque Nm / (r / min) 1250/1400 Travel parameters Maximum travel speed km / h 75 Minimum turning diameter m 19.5 Minimum ground clearance mm 260 Proximity angle 17
- Q:How does the car crane handle?
- Car crane operating permit (qualification certificate) at the beginning, middle and senior, in the local labor and social security departments, once owned, life-long, national general, no annual review; 2, car crane job card (certificate) regardless of grade,
- Q:What is the working principle of a truck crane?
- Because the multi-stage plunger cylinder is expensive, and the boom will be loaded when the elastic bending, a great impact on the life of the cylinder
- Q:What is the failure of the crane crane and the slow speed of the crane?
- If this is no problem is to open the crane between the steel, which loose wire rope, it can be slightly tighten it.
- Q:What are the characteristics of the development of car cranes abroad?
- The use of remote control not only save manpower, improve work efficiency, but also to improve the working conditions of the operator.
- Q:How to get the weight of the truck crane
- If the rod is stretched close, the hook is close to the body, the center of gravity is very small, you can bear the heavier load.
- Q:What is the difference between a truck crane and a truck crane?
- Tonnage truck cranes will be replaced by the performance of advanced, full-featured large tonnage truck crane.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
QY12D Truck Crane
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords