PORCELAIN RUSTIC FLOOR&WALL TILE SOTNE&MARBLE DESIGN
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 m²
- Supply Capability:
- 20000 m²/month
- Option:
- 60x60x1cm 60x60x2cm
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product informations
600*600mm rustic glazed porcelain tile
Sizes: 600 x 600,600*1200mm, GRADE:AAA
Thicknesses: 9.5-10.5mm
Water absorption: 0.5%
Surface: smooth
Min. order quantity:500 SQM
Certificates: CE and ISO9001
Usage area: Be suitable for market, hospital, metro, school, office building, hotel, real estate, bar and living room etc.
Package: standard export paper carton with wooden pallet
Payment terms: T/T or irrevocable L/C at sight
Delivery time: With 20 days after deposit
sand02.jpg
Product Parameter | |
Surface Finish | Glazed |
Size | 600x600mm 600x120mm |
MOQ | 3-4 items can be mixed in 1x20Gp is in stock |
Packing details | 850CTN-1224M2/20GP |
OEM | Designs can be produced according to your requirement |
Payment terms | T/T,L/C ,WESTERN UNION |
Test Item | GB/T4100.1-2010 | Test Result |
Length Tolerance | Length | 599.7~600.0 |
Side Straight | ±0.2 | -0.04~+0.05 |
Right Angle | ±0.2 | -0.05~+0.04 |
Surface Flatness | Center curvature | -0.04~+0.04 |
Surface Quality | Aminimum of 95% of the tiles shall be free from visible defects | No visible defects |
Water Absorption | Mean value E≤0.5 | 0.08 |
Breaking Pressure | When the thickness is ≥7.5mm, the average shall be ≥1300 | 1764.6 |
Modulus of Rupture | Mean value ≥35 | 37.2 |
Luster Degree | ≥55 | 70-73 |
Abrasion Resistance | ≤175 | 131 |
Resistance to Frost | No crack or peeling | No |
Resistance to Household Chemical Reagent | Not lower than UB level | UA level |
Resistance to Chemical of Swimming Pool | Not lower than UB level | UA level |
SIZE/mm | PCS/CTN | KG/CTN | SQM/CTN | CTN/20 | SQM/20' | KG/20' |
600x600 | 4 | 32 | 1.44 | 864 | 1244.16 | 27000 |
600x1200 | 2 | 35 | 1.44 | 768 | 1105.92 | 27000 |
- Q:but, not all the same time b/c I can‘t afford it. which project should be done first? a friend told me it is better to replace the tiles first because the dust is not good for paint.paint vanities orreplace tiles orreplace the bathtub?
- I think when we did our basement bathroom, we did paint, then tub, then tile. Painting your vanity will be least expensive. I would start there.
- Q:I bought 12 x 12 ceramic tile from Lowe‘s branded as SURFACE SOURCE with a PEI rating 4. I bought each tile for $0.58 each. I want to use the tile for the kitchen, bathrooms, laundry room and living room. The tile was made in Mexico. I think the tile was being discontinued at Lowe‘s. Thus, I think that is why the price was so low. Did I make a mistake? The tile looks good and feels good so I do not see a problem with. I need an honest opinion.
- First of all I hope you bought all they had, and had them check other stores. Certainly it's not unusual for a tile selection to go out of production. OPEN STOCK doesn't promise forever. The rating # refers to durability; YOURS being quite high. 58 cents is fair. With no offense at all to Mexico; most of OUR tile is created there. Italy is another source but I think number 3 on the list. Steven Wolf miles and miles of tile
- Q:Im looking into renovating our kitchen and thought i would cut some costs with doing some renovating ourselves. Is tiling easy to do yourself, how is it done and what surfaces can they be laid on?Thanks
- Laying tile isn't hard,go to Lowe's or home depot and get a tile saw,it doesn't have to be a high dollar one,they have Rhino board for the places that have to be stable and moisture proof,and get the trawl for it,it doesn't take a lot of the glue,you'll see the teeth on the side of the trawl,put some on the wall or floor,run the trawl(teeth side towards the surface,leave lines of glue about 3/16 s thick,that's enough to hold it,if it big tile squares make it a little thicker,they also have some spacers for putting between the tile,keeps it straight as well,then let it harden up and grout it,have several 5 gallon buckets of Fresh water(replenish the water when dirty) and a good sponge for wiping it down shortly after grouting.
- Q:I have a new bathtub with Durock cement board installed around it and I‘m ready for tile. I just got a guy out to give me an estimate for doing the tile work around the tub and he said the Durock would have to be primed first. I‘ve heard you‘re supposed to put the tile directly on the Durock, not paint it. Now I don‘t know what to do. Is he wrong? If he‘s wrong, do I hire someone else or just question him? He did another (non-tile related) job for me and did an excellent job, so I trust him, but I‘m nervous about this. Any advice is appreciated. Thanks!
- I don't see how priming it would have any advantage. I tiled over some a couple years ago and have had no problems at all. I would think the adhesion would be in question if you are basically adding a layer of paint in between. You don't prime concrete before you lay tile flooring so why would you do otherwise to a cement board? I would ask him for is reasoning behind it. If it sounds like BS and a way to add some time to the job hire someone else.
- Q:is it correct if i divide 198 by 2.25= 88 tiles? help ty
- You are correct, but only if you don't have to cut any tiles and the area you're tiling is basically one big rectangle with nothing in it like counters or appliances. If you have to cut tiles, the general rule of thumb is to multiply by 125%. In your case, that would be 110 tiles -- and bear in mind that general rule doesn't always work.
- Q:Can anyone tell me what type of tile this is? Name?
- All i will say is: its normally not a best thought to put it correct on top. It turns into extra seemingly for it to come up. After which the approach of taking over a layer of laminate and a layer of ceramic tile could be that a lot tougher when it happened. I consider the one technique to make that work with out taking up the ceramic tile is to make an air tight seal between the two. I couldn't give you any strategies on how to try this though.
- Q:Hello,Trying to decide on tile for living area. What is the difference between ceramic and porcelain tiles? What price is reasonable for installation of the tile?
- Not sure of price, but we just had to choose tile flooring last year. Porcelain is more durable and much less likely to crack if something were dropped on it, so, depending on your usage/traffic, you may want to consider. We found the price comparable between the two options and went with the porcelain.
- Q:i‘m having an investigatory project and its all about making tiles out of broken glass and rice hull. help me pls.
- i do not know what kind of tiles u want to make.is it glass tiles.and how many tiles u want to make.from where u would collect the glass.what would be the thickness of each broken glass. but all the best
- Q:I have some old dark tile in our entry way. It‘s not an option right now to replace it, so I‘d like to make it look better if possible. When I mop it and it looks nice and shiny. Then when it dries it looks dull. Is there any way to make it shiny all the time?Thanks
- You could try to re-seal the tile. Is your tile glazed? Glazed tiles should never need to be sealed, as the glaze is the sealer. Do a water test first to see if your tile is soaking up water. Put a little water on the tile if it turns dark, then your tile needs to be re-sealed. If you just want to make it shiny, you can try a topical sealer. Your local tile/flooring store should be able to help you pick the best one. There is also something called a 'wear layer' which is an acrylic floor finish that helps to keep you from wearing through the sealer. Again, your local tile store can help you with this step.
- Q:Im putting that peel-n-stick tile stuff in my new apartment over the stuff thats there (i dont know what its called but its like plastic kinda) is there any thing i have to do other then sweep before i put the new one down?
- you can get an adhesive that will clean the floor and also help the stick tiles adhere better..they sell it at lowes..we did this when we put peel and stick tiles down...and it did work..but we removed the floor the lino..which it sounds like thats what you have too...go to your local home improvment store and ask them...
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
PORCELAIN RUSTIC FLOOR&WALL TILE SOTNE&MARBLE DESIGN
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 m²
- Supply Capability:
- 20000 m²/month
- Option:
- 60x60x1cm 60x60x2cm
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords