Polished Porcelain Tile The Super White Color CMAXSB6500

Ref Price:
Loading Port:
China main port
Payment Terms:
Min Order Qty:
Supply Capability:
1000000 m²/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Key Specifications Polished Porcelain Tile The Super White Color CMAXSB6500:


 Product Features


  Polished Porcelain Tile, Double Loading

  Only Grade AAA available

  Strict control on color shade, deformation, anti-pollution, surface glossy degree as well as packing

  Competitive price

  Standard export packing: Pater Carton+ Wooden Pallet

  Fast delivery

  OEM service could be offered

  Marketing support on samples, catalogues as well as carton designing

  Professional sales team for product, document and schedule of importing and exporting.


Product Specification 


  Tile Type: Polished Porcelain Tile

  Quality standard: GB/T4100-2006, ISO13006, ISO9001

  Water Absorption Rate: 0.5%

  Breaking Strength: 1800 N

  Rupture Modulus: 40 MPa

  Length and Width Tolerance: ±0.1%

  Surface Smoothness: ±0.15%

  Edge Straightness: ±0.15%

  Wearing Strength: 1600 mm3

  Glossiness: 85 Degree

  Resistance to Chemical: Class UA

  Resistance to Staining: Class 3.


This series of products in addition to good wear resistance with ultrafine tiles, flexural strength,

and low water absorption, the appearance of the product, due to be fired into a crystal frit, so

three-dimensional effectprominent, white the texture clear, natural, delicate harmony and balance without duplication, with impeccable decorative effect, close to natural stone.        


 If you ask me,what do you live for?


Maybe there is only one reason:I love life.


In the place where I live,I would like to put my life taste into the space decoration. I try to find what will help me?Until one day,my family travel to one seaside,I was shocked by what I saw,high mountain and clear water and green trees in front of me,what a wonderful scene! Can I take the beautiful things to my home?At that instant,suddenly I feel that life and porcelain should be the best partner.


Nature,space,design,which of porcelain is what I am happy to share with you.


Life and Porcelain,Love and Passion,the story is going on


This series of products in addition to good wear resistance with ultrafine tiles, flexural strength,

and low water absorption, the appearance of the product, due to be fired into a crystal frit, so

three-dimensional effectprominent, white the texture clear, natural, delicate harmony and balance without duplication, with impeccable decorative effect, close to natural stone.              


Technical characteristics:



Adopt international advanced ceramic cloth exquisite processing technology, selected high


quality pure raw materials, on the product body, with moist and gorgeous color, microcomputer


total precision control, multiple temperature control forming technology create gorgeous texture


hd grain boundary, bottom dense embryo thicker, pure texture, deduces the natural stone material through the external environment and the geological characteristics and the dynamic form of change,


also make products with high hardness, high gloss, low water absorption, strong dirt resistance, easy


to clean, etc excellent characteristic


Main Export Markets:


Mid East/Africa

Central/South America



Southeast Asia, Mideast Asia



Product Picture :



Polished Porcelain Tile ST36046 Polished Porcelain Tile ST36046



Production Line :


Polished Porcelain Tile ST36046


Product Certificates :


Polished Porcelain Tile ST36046


Packing Details  :



Polished Porcelain Tile ST36046




Product information:


Material: soluble salt porcelain


Various colors are available


Size: 600 x 600mm


Thickness: 10mm


Features: non-slip, wear- and water-resistant


Packing: 4 pieces/carton, 29.5kg/carton


20-foot container: 880 cartons


20-foot FCL container: 1267sqm


Packing Information (For 27.5 Tons heavy 20’Fcl)


  For 600x600mm, 4pcs/Ctn, 40 Ctns/Pallet, 960 Ctns/20’Fcl, 1382.4m2/20’Fcl

  For 800x800mm, 3pcs/Ctn, 28 Ctns/Pallet, 616 Ctns/20’Fcl, 1182.72m2/20’Fcl




1.    For Polished Porcelain Tile, is the 30*60 available?

—— Yes, 30*60 is available. Due to the basic size is 60*60, we need to cut 60*60 tile into 30*60. 6 pcs are packed into one carton.


2.    What is the MOQ for this tile?

—— Normally the MOQ is 1382.4 m2 for one 20’ container. To support our clients, we could go with 3 models to fill one container at most.


3.    Can we use the carton with our own design and brand name?

—— Yes. Normally we go with Neutral Carton or our Carton with our CMAX brand name. But for carton of client’s own design, the MOQ for one size is 5 containers, due to the carton factory can’t arrange production if quantity is below 5000 pcs.


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:What are the advantages of Marco Polo Tiles? How to choose the tiles?
You can go to CityTogo to see the above Marco Polo tiles it From the appearance point of view, the color should be uniform, surface finish and flatness is better, the other can be identified by the sound, with a hard light flick, the sound more crisp, the higher the degree of porcelain, the better quality. Or can use water droplets in the back of the tile, see the water spread after the infiltration of the speed, the slower the water, indicating that the greater the density of the tile, on the contrary, that the density of sparse, its inherent quality than the former is excellent. In addition, from its hardness point of view, with the tile pieces of the edges and corners scratched each other to see broken fragments broken, if it is fine, hard, or leave scratches rather than loose, soft, or left scattered powder, It is good quality. These are common sense
Q:re-tiling a shower?
I have retiled a couple of showers, and this is basically what you're in for: You need to remove all of the old tile. This could require removing the grout, but you may be able to use a scraper and get the old tiles off without removing the grout. Then you will be replaceing the sheet rock that was under the old tiles (make sure to use green board it's water resistant). This will give you a new and smooth surface to put up new tile. Then you need to get your tile, grout, plastic t-shaped spacers, and fast setting tile mortar. You can buy pre-mixed mortar, or mix your own (pre-mixed is easier, but a little more expensive). Use a mortar trowel (the kind with the saw toother edges) to spread a thin layer of mortar evenly on a section of wall. Then place the tile and use the plastic t-shaped spacers to keep the seperated, and even. After the tile has had time to set (the next day in most cases) mix up your grout, and apply it to the edges of the tiile. This will be messy, but don't worry, you can wipe the grout right off of the tile surface. After the grout dries, you want to use a grout sealant to make sure the grout is resistant to water. Unsealed grout will deteriorate, and also grow mold and mildew. hope that helped... it can be a bit challenging if it's your first time, but doing it yourself can also save you hundreds in labor costs.
Q:Terra cotta roof tiles?
here in the uk we dont use shingles ..not man enough to last ..so we have clay ..concrete ..and terra cotta roof tiles ...no point in putting on a roof covering unless it gonna last at least 100 years ..out roof tiles have hooks at top that sit behind the tile lathe ...most tiles are not actually nailed ..most are every 3 or 5 rows ..i have worked on dozens of roofs where not one was nailed ..the roof angles and tile weight prevent them from moving ..we fix with either galvanised or copper nails
Q:Does anyone know anything about these tiles?
Very nice and I am sure that once you put them up you will love the vintage old world look that they will give your room. Have fun!
Q:Can the tiles be under the floor?
of course can. Preferred tiles. Thermal fast. Generally the warmest of the bottom must have a reflective film. Leading to heat will be straight up, will not cause waste. In addition: now the country is suitable for heating in the field of floor is not yet mature products. Advertising on the market mentioned by the professional and warm to strengthen the floor is not up to the standard. Once the heating began, indoor formaldehyde and benzene content will be seriously exceeded. Note: If your workers are working hard. It is recommended to do solid wood flooring. Formaldehyde content will be slightly lower, of course, no tiles environmental protection.
Q:can you put counter top on existing ceramic tile?
yes. There is going to be some prep work needed first, and what that will be wil depend on what kind of countertop you are going to be using. You might want to add that information to your question. In most cases a sheet of plywood cut to size, and installed over the existing ceramic will do nicely
Q:When to use sheetrock for tile?
It may have been sheetrock that you remember but more than likely it was some type of special backer product that resembled Sheetrock but was made specifically for use under tile. There are several types available at Lowe's like hardibacker or durarock. Both of these products are designed to be placed on the surface to be tiled before the tile is applied and act to stiffen the substrate. In other words they make the surface that the tile goes onto into one big solid piece as opposed to several sheets of plywood. The benefit of this is that is keeps the tiles from moving in relation to each other which will cause the grout lines in between them to crack and gap. These products are generally put down, when tiling floors, on top of a layer of mortar same as you spread mortar to hold the tiles down. Ans then these backer boards are nailed down with roofing nails and the joints are mortared and usually taped like drywall joints are. Then more mortar is spread on top of these boards and the tile is set into this mortar. Floors generally use the 1/4 thick backer board and when applying on walls the 1/2 backer is used. Just nail to the studs and paint with a waterproofing paint then mortar and apply tiles. Good Luck.
Q:How about Tommy Tiles?
But also if it is a good point on the With Guangdong brick Such as Mona Lisa Marco Polo I hope my answer will help you Give the best answer to an answer
Q:Glass glue and tiles
Glass glue gun with the United States sewing agent gun is the same, general
Q:Is it difficult to lay ceramic tile? Can you use the same tile on the walls that are on the floor?
Hi, okorder.com for more detail on installing and cutting your tile.

1. Manufacturer Overview

Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range