Specifications of Patch Panel cat5e
patch panel cat6A/cat6/cat5e/cat3 utp/ftp 24 port/48 port
110/Krone/Dual cat3 cat5e cat6 cat6a patch panel
patch panel cat6A/cat6/cat5e/cat3 utp/ftp 24 port/48 port / 25 port/50 port
110/Krone/Dual cat3 cat5e cat6 cat6a patch panel
Meet TIA/EIA-568-A and TIA/EIA-568-B Category 6 requirements.
Meet TIA/EIA TSB-40
Meet ISO/IEC Generic Cabling Standard 11801
Meet CENELEC Generic Cabling Standard EN50173
Angle: 90 Degree
Termination: 110, KRONE,DUALTypes (3 types)
Electrical of Patch Panel cat5e
According to UL 1863
Current rating: 1.5 Amp Max.
Voltage rating: 150 Volts
Contact resistance: 20 m-ohm
Insulation Resistance: 500M-ohm
Dielectric Withstand Voltage: 1000 V AC RMS, 60Hz 1min
Materials of Patch Panel cat5e
Housing: PC UL94V-0
IDC: PC UL94V-0, Accept 22-26 AWG Solid Wire.
PCB: FR4 1.6mm(0.04") thickness, 2 layers
Contact: PC Ul94V-0, 0.45mm(0.018") Diameter Phosphor bronze with 3 u" to 50 u" Gold plating
- Q:Now the market professional installation monitoring the construction team how much money a point? , As well as cable patch panels and telephone patch panels how much money a point? Is it distance?
- Directly to find Dell customer service bar, the general warranty period are free replacement, unless the insurance of the. You can extend the warranty period, it seems you like to do the experiment.
- Q:Why this cable has not yet been certified
- The manufacture of wire and cable is completely different from that of most electromechanical products
- Q:What is the difference between a trunking and a bridge in a weak construction?
- Mainly to distinguish the ground which is the ground, the color of the ground is generally yellow-green; wire two is the fire line L and zero line N, no ground wire, look at the plug on the LN mark, the corresponding good.
- Q:The computer can not open the machine display frequency beyond the scope of the mouse and keyboard do not start can not press F8 how to do
- Then you get the repair station to see what is the problem
- Q:When pouring concrete is how to put the tube
- Oh, the pipeline is poured before the layout according to the design drawings.
- Q:Galvanized wire tube buried to do anti - corrosion do
- No need. Galvanized flat iron to do when the grounding grid is not anti-corrosion, but if there is welding or damaged place to become anti-corrosion.
- Q:Where should the inner diameter of the plastic tube of the cable be at least the number of times the outer diameter of the cable?
- You are not very clear: how to start again? 300μF capacitor is normal? If the sound is normal (very small) after no-load start, the cable and the motor temperature are normal, the coil can be judged to be normal
- Q:Ipad charging display does not support this accessory
- Data line problem, it may be the data line to the bad, caused by poor contact. For the sake of the root
- Q:Is there a difference between PE cable and PE water supply pipe?
- Rubber over the bridge surface curing treatment, nice and at the same time to ensure a safe Pressure tonnage: 5 tons to 65 tons, indoor and outdoor are available (and provide only tramway) Uses: used in engineering department exhibition company, power company construction line, play a role in protecting the line Rubber trough ■ tough, insulated, high pressure (maximum load of 65 tons) rubber over the bridge ■ suitable for all outdoor weather, rain, lightning, moisture, flame retardant ■ surface non-slip surface texture ■ Position protection to the type of cable and communication data cable ■ unique design, no need to destroy the ground installation ■ durable, the surface of non-slip surface texture ■ simple installation, easy to move, structural design briefs practical ■ unique elbow, tee, Selection ■ 1 hole, 2 holes, 3 holes, 4 holes, 5 holes design, fully applicable to the exhibition, performing arts, workshops, power, communications, military and other industries 2 Specifications Table 1 Specifications 1000 × 130 × 20 aperture 40 × 13 Weight 12KG (for indoor cable signal line, etc) 2 Specifications 1000 × 275 × 40 aperture 105 × 30 Weight 32KG (for indoor wiring too thick if the wire, etc) 3 Specifications 1000 × 250 × 50 aperture 32 × 35 Weight 7KG (applicable Over motor vehicles and large trucks, etc) 4 Specifications 900 × 500 × 75 Aperture 50 × 60 Weight 19KG (for motor vehicles and forklifts, etc) 5 Specifications 900 × 500 × 75 Aperture 32 × 35 Weight 21KG (for the workshop workshop, such as truck ) 6 Specifications 900 × 620 × 110 Aperture 90 × 90 weight The amount of 28KG (for small trucks and large trucks, etc) 7 specifications 1000 × 310 × 55 aperture 35 × 35 weight 15KG (for workshop workshop forklift or private cars, etc) 8 specifications 770 × 485 × 65 aperture 40 × 40 weight 18KG For the workshop workshop plant forklift, etc)
- Q:Wire pipe inlet air switch trip how to do?
- The middle of the line is not a problem where there is a problem in the place where the joints check the place of the joints can not do the lines are out to check the time and effort
Founded in 2009,we are the professional manufacturer of computer room management and power distribution Cabinet perimeter devices. We have two divisions. The first is a PDU division, it's main products are PDU, KVM servers, and the cabinet temperature controller. The second is Chassis division, it's main products are industrial computer chassis, server chassis, chassis data storage, agent industrial power supplies, industry guides. To meet IT, and Cabinet industry customer needs.
1. Manufacturer Overview
|Annual Output Value
||Above US$10 Million
||Mid East；Western Europe；North America
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
||Above 300,000 square meters
|No. of Production Lines
||OEM Service Offered；Design Service Offered
|Product Price Range