Packing and Lamination Film-Aluminum foil- PET – LDPE

Ref Price:
Loading Port:
Payment Terms:
Min Order Qty:
10000 m²
Supply Capability:
1000000 m²/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Item specifice:


Product Description:

Product Structure

Widely used for laminating with EPE insulation, Bubble insulation, woven fabric insulation, etc

● Aluminum foil – LDPE
● Aluminum foil- PET- LDPE
● Clear Transparent PET-Aluminum foil – LDPE
● Aluminum foil-Metallized PET- LDPE
● Metallized PET- LDPE

Product Application

Widely used for laminating with EPE insulation, Bubble insulation, woven fabric insulation, etc

Product Advantage

Light weight

• High manufacturing accuracy

• High strength

• Small inertia resistance

• Strong heat dissipation ability

• Good visual effect

• High reflective insulation

• Heat resistant, water proof, stable at high temperature;

• Environmentally friendly, no smell and not-toxic;

• Smooth and clear surface;

Product Packing

1. Waterproof paper then PVC shrinking Film

2. Kraft paper only

3. Woven cloth

4. Kraft paper or Water Proof Film then Metal/wooden pallet

5. (Also as your request. )

Product Remarks

1. The data above are typical results and subject to change without notice.

2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm;

                      Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.

3. The products should be stored at room temperature and kept from wet and heat source.

4. It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.

5. The user should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for user’s special purpose and technique.

Product Data Sheet





Basic weight








Tensile strength: M. D.

               X. D.





 Delaminating Values



   ASTM D904

Reflectivity of foil surface




Temp. Resistance



No Delamination

No Delamination

ASTM C1263

Water vapor permanence




Product Picture

Packing and Lamination Film-Aluminum foil- PET – LDPE

Packing and Lamination Film-Aluminum foil- PET – LDPE

Packing and Lamination Film-Aluminum foil- PET – LDPE

Packing and Lamination Film-Aluminum foil- PET – LDPE


1. What is the product keeping conditions?

The Aluminum Foil Facing should be stored at room temperature and kept from wet and heat source.

2. What is the guarantee years of the products?

We have established the international advanced quality management system,every link from raw material to final product we have strict quality test;We resolutely put an end to unqualified products flowing into the market. At the same time, we will provide necessary follow-up service assurance.

3. What is the delivery time of the order?

In the purchase of product within four working days, we will arrange the factory delivery as soon as possible. The specific time of receiving is related to the state and position of customers. Commonly 7 to 10 working days can be served.

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Are floor mats made of ordinary plastic sheeting?
But in the damp ground or geothermal conditions in tidal and geothermal temperature (especially geothermal temperature exceed the standard) under the action of the tape is extremely easy to cause the joint degumming, breathable, causing the floor bulge, Alice, sound or color etc.
Q:Why plastic film greenhouse can keep warm?
Because the heat is hard to escape through the plastic film, the temperature difference between the upper and the lower of the greenhouse can not be enlarged, and the convection is very small, so that the heat can be kept warm. The key here is the plastic film is very similar to shun donkey, sun radiation from the inside, with stubble, almost without shelter; and the heat from the inside out is the inverse stubble, resulting in heat insulation.
Q:Can it be covered with plastic film after pouring concrete outside zero?
The correct approach is: 1, water and aggregate heating; 2, the erection of greenhouses; 3, mixed with antifreeze method and so on, this is not the only one. About zero degrees or even about 10 degrees below zero, mixing additives is a simple and reliable way. After pouring, seriously cover the insulation, hot water conservation can.
Q:What's the packing material for yogurt? Plastic bags, then what plastic film, and can not use carton packaging?
Yogurt packaging (direct contact with the milk, milk is white, PE) three layer material more. Upstairs said BOPP is wrong. I've never seen a composite material for yogurt. Make the outermost layer of yogurt. BOPP composite is ok.A better one is a cup, and the PP cup is more common. Carton packaging, you go to the mall to see some, but the cost is relatively high, not necessarily for you.The cartons are not clear and should be the same or the same as the Tetra Pak products.
Q:In a bowl with the seeds covered with plastic film, you need time off the air
Plastic film cover in order to keep the soil moisture in the soil, air breathing for seed germination and growth of enough, only to grow seedlings, to remove the cover film, otherwise the film may have a high temperature.
Q:FFS plastic film bags are injection type?
Tube film (blown film process) has become the best production method of FFS bag film products. FFS bag blown film technology is divided into single layer extrusion and multi layer extrusion technology according to its product form. Their production principle is basically the same, mainly equipment is different.
Q:My house just bought a refrigerator, the box wrapped a layer of plastic protective film, and some have wrinkled, and then pulled down, there are some wrinkle free, whether the need to uncover? Does it bring harm to the cooling of the refrigerator with film?
Put refrigerators, usually in the refrigerator on both sides reserved 5 to 10 cm distance, the top to set aside 10 cm, the rear should be reserved 10 centimeters of space, so as to help the refrigerator full heat dissipation. Otherwise, the heat of the refrigerator will be stored behind or on both sides of the refrigerator and will not be well lost. In addition, there is a vent around the refrigerator, or a vent that can return to the refrigerator, which allows the heat of the refrigerator to reach the vent.
Q:A concrete cover film, under what circumstances to cover, what does not cover
The thin film is a thin, soft transparent sheet. Made of plastics, adhesives, rubber, or other materials. A scientific interpretation of a polyester film is a 2 dimensional material formed by atoms, molecules, or ions deposited on the surface of a substrate. Example: optical film, composite film, superconducting film, polyester film, nylon film, plastic film and so on. Films are widely used in electronic, electrical, mechanical, printing and other industries.
Q:Is it possible to lay a plastic film between the roof slab or concrete for waterproofing purposes?
The seam of the prefabricated plate is very easy to crack. The plastic film is not good enough and is easy to pierce. Once it rains, it basically can't get waterproof effect;
Q:What is the density of the common PE films?
PE film, that is polyethylene film. Polyethylene plastics are of high density, medium density and low density. Generally linear low-density polyethylene density: 0.91 - 0.965g/cm3 (g / cm3).

1. Manufacturer Overview

Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range