|Place of Origin: |
Hebei China (Mainland)
|Brand Name: |
|Model Number: |
|Surface Treatment:: |
|Special Use:: |
High-strength Steel Plate
|Zinc coating:: |
Packaging & Delivery
|Packaging Detail:||According to international export standard|
|Delivery Detail:||with in 15 days after deposit|
floor deck panel
25year service life
open steel flooring deck
1. thickness: 0.6-1.2mm
3. special use: roof plate
4. can be used in building material field , galvanized wire steel tape and other fields
floor deck panel
Galvanized steel sheet
any length,according to the transportation,generally less than 12m
long life span: more than 25 years
Plastic film,pallet or as your requests
with in 15 days after deposit
- Q:There are usually several kinds of plates
- Cabinet box board usually has three kinds of materials:
(3) medium density fiberboard
And the surface layer of the board used in the cabinet cabinet is treated with trihydroxyammonium refractory veneer. Box thickness 18mm. (Avoid using 16mm, so as not to bend deformation, in the purchase of cabinets, please pay special attention).
Blockboard wood core is made of natural wood sticks, the waterproof and moisture resistance is better than the particleboard and MDF. Because it is natural wood, so fast, easy assembly and easy to loose. In view of the blockboard is made of wood. Therefore, the surface roughness is often poor, often appear ribs block, for the cabinet cabinet board, the visual level of the feeling of uneven. Therefore, the cabinet company is not unreasonable to abandon. Such as blockboard to solve the uneven shortcomings, can be described as the ideal selection.
Particleboard is fundamentally different from the traditional concept of particleboard. As a result of the use of German machinery, molecular shrinking more closely, so it can be load-bearing, and not easy to bend deformation. Particleboard is natural wood crushed into granular, the pressed into a plate, the waterproof performance is better than the MDF, cabinet cabinet is the main material. Which made the Jilin Lu Shui River board for the best, but there are many fake on the market, we must pay attention to the time to buy identification.
Medium density board is powder after molding, resistance to wet performance is poor. Flatness is better, usually used for plate furniture, office furniture more. As the MDF tightening after easy loose, loose and then tightening strength. Therefore, the cabinet company has no more general use of some truth. Due to the medium density flatness, for the door and the countertop more appropriate. For the cabinet board, in the assembly fastening process, subject to certain limitations.
- Q:What kind of auxiliary materials / details of the woodworking board shop?
- F30 most commonly used, mosquito nails, J1010 those, there are F20,25, ST38,50, T50, self-tapping screws, slotted tapping screws, glass glue, foam glue, Handle, hardware (track, lock, hinge, door suction, bed hanging ..)) ...
Ceiling: the main vice-long, screw, 8 sets!
Gypsum board, silicon calcium board! The a lot,,
- Q:Wood board first-line brand which
- Zhangzhou "high-floor card" template good, has been maintained in the country before the quality assurance, we are using their construction companies template, cooperation for more than ten years, really good, you can go to see
- Q:Will the sheet metal processing bending coefficient and plate thickness, bending angle
- The bending factor and the thickness of the material you said bending angle ah bend the radius and bending the bending machine up and down mold, the length of the bending parts are related
We are using experience value. After all, conventional standard brick algorithm does not take into account the equipment wear and tear, sheet material thickness of the situation
Different thickness determines the different bending factors such as 1mm cold rolling fold 90 degrees and 2mm cold rolling fold 90 degrees
Our actual situation is 1mm coefficient is 1.8 2mm coefficient is 3.5
The same angle 90 degrees is a bending factor of 60 degrees is 1/2 of the bending coefficient of 45 degrees is 1/3 of the bending coefficient of less than 30 degrees according to the different thickness of the buckle or buckle a 0.5
Material and plate thickness as different materials, the bending coefficient is different
The bending radius is related to the bending machine. The standard single V or double V is even the default value of the other V slots.
But there are customers who need to be too small or a large bend radius will be specific to the analysis
Too small bend radius, our approach is to plan the groove to bend, so that the bending radius is very small, almost vertical right angle bending
Too large bending radius, the upper mold can be used on the corresponding arc on the mold (note that the upper arc of the R is the inside of your bending R, if the outside R according to the outer R minus a plate thickness to determine the model)
Or a large R30 50 or more, you can use a split bend, which requires the calculation of the cut-in angle and the last knife angle, as well as the size and angle of each knife
There is a part of the length of this I think a lot or machine equipment and related to our machine a long time 1.5mm stainless steel over 1m according to the case will not use 8mm mold bending
- Q:Willow eucalyptus wood and pine which is good
- Many businessmen will use cheap wood eucalyptus, Malacca (another produced from Southeast Asia fast-growing cheap wood) core wood blockboard beautification into a "solid wood ecological board", attempt and solid wood detached, confuse, mislead consumers, but its essence Is still the use of cheap wood man-made sheet. The price is there.
Pine, especially New Zealand pine widely used in the production of a variety of pine wood furniture, there are many specialized in the production of pine furniture brand, is also widely used in children's furniture and other fields.
In addition, we must use a lot of glue and increase the risk of formaldehyde release. The plate will also increase the release of formaldehyde during the cutting process, and the same conditions do not have these problems.
Of course, the use of blockboard can save a lot of cost, so for decoration, props production, especially public commercial space project is still very meaningful.
So in general, a kind of wood is not dare to show his face, a large square is made of solid wood furniture wood.
Combined with the actual value of the two woods in reality, and their application effects.
Pine should be excellent and willow eucalyptus wood, Malacca.
- Q:Cabinet cabinet board types which
- Fire board cabinets
Fire board cabinets, listen to the name to know it is high temperature, the color is also quite beautiful and beautiful, but its quality in the selection must be careful, the use of the process should also be protected, or prone to degumming, deformation of the situation.
- Q:Furniture board specifications four eight feet What is the meaning of that: 4 * 8
- Consistent with the specifications of stainless steel plate,
4 * 8 four eight feet that is 1219mm * 2438mm
It is 1 meter 22 * 2m 44
- Q:What are the plates of plate furniture?
- Plate furniture is made of man-made sheet (MDF, particleboard, blockboard, etc.) as the substrate, the surface of the artificial wood color or veneer, melamine board for surface finishes. The advantages of plate furniture is sheet metal forming, stable performance is not easy to deformation, processing and transportation are more convenient.
- Q:Hubei which brand plate more reliable?
- My home with the Cornell's plate, the price can also be, as far as I know there are Fu Han, Jin Han, but Fuhan fake more, there is a new Hong wide decorative materials, the price is relatively high, hope to you helpful
- Q:What is the nanometer board?
- The United States and nano-board is the MDF, and now a lot of businesses are the MDF into a variety of names to deceive consumers, this thing is to do with the plate furniture. If it is the choice of furniture, then do not recommend the choice of plate furniture, because the density of formaldehyde is too serious, and the indoor temperature is slightly higher there is pungent taste, do not listen to what the business people do not have a taste certificate, those are cheating The consumer. My aunt bought the plate furniture for 3 years there are flavor it Density board this thing is very cheap, so the plate furniture good bargain. There are businesses that are shameless to use the particleboard to do furniture, but also the name of solid wood particles. I faint, that thing like the same thing. See inside you will vomit. Are broken wood weeds, as well as pungent nausea taste. Now want to buy furniture floor or buy solid wood a little better, although your point but with the rest assured. At least the wood thing is natural, even if the wood is also something natural than those who work with the rest assured. My family's furniture for 4 sets, and in front of three sets of furniture is what plate wood combination, regret dead, not not strong is pungent taste. Finally changed the set of solid wood, but not the kind of good wood mahogany. After all, not a wealthy, but with a lot better, did not taste do not say, but also strong I said that I have 4 sets of furniture experience, hope to adopt.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range