Met Coke M40(80)
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m.t.
- Supply Capability:
- 100000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1. Structure of Metallurgical Coke of Met Coke M40(80) Description:
Coke is made by high temperature metallurgical coke for blast furnace smelting, casting and gasification. Occurring in the process of coking after recovery and purification of coke oven gas is a high calorific value of fuel, is an important industrial raw material in organic synthesis.
Coke is mainly used for blast furnace ironmaking and used for copper, lead, zinc, titanium, antimony, mercury and other non-ferrous metal smelting of blast furnace, reducing agent, compound and the function of stock column frame.
Blast furnace with Coke instead of charcoal, which laid a foundation for the large-scale of modern blast furnace, is a major milestone in the history of metallurgy.
On China's coke production distribution, the regional distribution imbalance of coking enterprises, mainly distributed in north China, east China and northeast China.
2. Main Features of the Metallurgical Coke of Met Coke M40(80):
• Quality assurance
• Mutual benefit
• Preferential price
• Various choice
3. Metallurgical Coke of Met Coke M40(80)Images:
4. Metallurgical Coke of Met Coke M40(80) Specification:
Parameters | Guarantee | Rejection |
Total Moisture ( As received basis ) | 5% max | |
Ash ( dry basis ) | 12.5% max | > 13.5% |
Volatile Matter (dry basis ) | 1.5% max | > 1.8% |
Sulphur ( dry basis ) | 0.65% max | > 0.75% |
Phosphorus ( dry basis ) | 0.035% max | > 0.045% |
M10 | 8% max | > 10% |
M40 | 82% min | <80% |
CSR | 62% min | <60% |
CRI | 28% max | > 30% |
Size 30-80 mm | 90% min | |
+80 mm | 5% max | > 8% |
-30mm | 5% max | >8% |
5. FAQ
The wear-resisting of coke strength refers to the coke can resist external friction without the ability to produce glass formation on the surface of particles or powder, said with M10 values.The crack degree of coke affect its crushing strength M40 value, coke M10 hole spore structure impact abrasion strength value.M40 and M10 value determination method are many, China USES German m gong drum test method.
- Q:How to remove the bottom of coke steel
- Two, with cooking shovel (Mason's Pihui knife is best) to remove surface soft.Three, the same with a spade close to the bottom of the pot to eradicate. Until the last thing left is black.Four, wash the metal wire ball friction force discoloration, and always use water to clean out the dirt.
- Q:What are the ingredients of coke
- The chemical composition of coke including fixed carbon, ash, sulfur, volatile matter and moisture. Except moisture, other ingredients in dry coke as basis.
- Q:Purpose of using coke in iron making raw materials
- Purpose as follows:1. Provide the heat required for the reaction2, do reducing agent, generate CO, at the same time itself can also restore the iron
- Q:F.C Ash S V.M H2O SizeMore than 85 less than 15 less than 8 less than 0.8 less than 1.5 10-70mm over 90%,I would like to ask, what is the size of the corresponding coke? Metallurgical coke or something else, there is no relevant information about, thank youF.C = 85, Ash = 15, H2O = 8, S = 0.8, V.M = 1.5, Size:10-70mm 90% and above, so clear, like the product, the current price?
- Three metallurgical coke: fixed carbon 83-84.5%; calorific value 6500cal/kg; ash < 15%; volatile < 1.9%; all 6% "1%" water; sulfur;Maybe not, I'll give you a web site, find it yourself
- Q:the CO reduces the iron oxide, and the part of CO burns, and the whole process will release a lot of heatCheck information, combined with the knowledge of the professional knowledge, for reference purposes only!
- Please see standard: metallurgical coke GB/T1996-2003, all clear
- Q:The chemical composition of coke is m10.m25
- Abrasion resistance refers to the ability of coke coke can resist friction without generating surface of glass forming debris or powder, by the M10 value. The effect of the crack of coke crushing strength, M40 value, the influence of coke pore structure of abrasion strength M10 value determination method of.M40 and M10 was more in China the migon drum test in Germany. As shown in table 31-1.After the completion of the test, the sieve with the pore diameter of 40mm and 10mm screening, greater than the percentage of 40mm particle size is M40, less than 10mm of the particle size of the M10 value. The intensity of the provisions of China Metallurgical Coke indicators are shown in table 31-2.
- Q:How to determine the maturity of coke or not?
- The sulfur content of coke: refers to the percentage of sulfur content in coke. Sulfur is one of the harmful impurities in pig iron smelting. The sulfur content in the pig iron is more than 0.07%. 82.5% of the sulfur from blast furnace charge into the furnace comes from coke, so coke is the main source of sulfur. Sulfur content in coke directly affects the production of blast furnace. When the sulfur content in coke is greater than 1.6%, sulfur increased 0.1%, the amount of coke increased 1.8%, limestone amount increased by 3.7%, with the increasing of the amount of ore 0.3%, blast furnace production decreased 1.5 - 2%.
- Q:What is the concept, relationship and difference between coke and coke? The main difference and contact, thank you
- Metallurgical coke is coke, coke, iron alloy coke and non-ferrous metal smelting coke ". Since more than 90% of metallurgical coke is used for blast furnace ironmaking, it is often referred to as coke. Coke is a special and molten iron cupola coke. Coke is the main fuel cupola molten iron. Its role is to melt the burden and make the hot metal overheating, the support column to maintain good ventilation. Therefore, the foundry coke should have large blocks, low reactivity, porosity is small, with impact crushing strength, low ash and sulfur enough.
- Q:What is the sample quantity of coke moisture test? What is the test time? How many degrees? That is the national standard.
- Three, instrument and equipment of drying box: with automatic temperature adjusting device, can maintain the temperature of 170 DEG C and 105 a 180 a 110 C, the tray is made from galvanized sheet iron or aluminium sheet, size is about 300mm x 200mm X 20mm. The glass weighing bottles: diameter 40mm, high 25mm, and a grinding cover tightly. Dryer: inside the color of silica gel or granular anhydrous calcium chloride
- Q:What are the quality indicators of coke
- Coke is a solid product of high temperature carbonization, the main component is carbon, is a crack and irregular pore structure (or porous). The number of cracks has a direct impact on the strength and crushing strength of the coke, the index is generally measured in terms of crack degree (the number of cracks in the unit volume coke). The index of pore structure is mainly expressed by the porosity rate (the percentage of the total volume of coke), which affects the reactivity and strength of coke.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Met Coke M40(80)
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m.t.
- Supply Capability:
- 100000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords