LW1600 Cold Forming Mill roll forming machine
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 100 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Structure of CFOE mill Description
LW1600 Cold Forming Mill is the newest product in our company, which adopts CFOE patent technology from our company. CFOE means continuous flexible forming and straight seam submerged-arc welded pipe. There are special advantages in the mill.
Main Features of LW1600 Cold Forming Mill Description
The mill is continuous production, which is no need to change the rollers in rough-forming section when the specification needs to be changed. Compared with ERW, the quality and energy consumption of CFOE is easier to be controlled, and is welded better and low consumption. The welding seam of CFOE overcomes the shortages of long welding seam and difficult inspection on spiral welding seam after inbuilt. Compared with UOE and JCOE, the investment cost and production cost are low. The quality of CFOE welding seam is the best in all welding seam technology. CFOE is the most reliable, and there is no circular interface welding seam on the pipe, which is easy to weld, inspect, maintain and repair. The pipe produced by the mill just covers most pipes which are currently used by oil, gas casing. The mill also has a good market prospect. Annual production capacity is 50,000-100,000 tons.
If there are small differences between CFOE cost and spiral welded pipe cost, nobody will buy spiral welded pipe on high grade pipeline. CFOE welded pipe will replace fully spiral welded pipe in high grade pipeline, and have a good market prospect.
CFOE can be the complement mill for the JCOE mill. Because it is hard and uneconomical for UOE and JCOE to produce the pipes within the diameter range of Φ219～Φ711. There are outstanding advantages such as less production cost and high production capacity. Due to low production capacity and over high price of JCOE mill, which create the serious competition problem, it can make up middle and large diameter in JCOE.
LW1600 Cold Forming Mill Specification
Rolling bottom line (mm): 900mm
Pipe diameter :Square □120×120～□400×400mm
Rectangular □100×130～□300×500mm
Wall thickness: 3.0～12.7 mm
Strip width : 480～1600mm
Forming speed : 0～15m/min
Driven Stands :16. roll Shaft diameter 230mm
Idle side Roll Units 8. roll Shaft diameter 130mm
Power of high-frequency unit: 800kW
Main motor: model (DC) power 200kw×2 250kW speed 500/1600rpm
Strip width : 480～1600mm
Forming speed : 0～15m/min
Cut-to-length accuracy: ± 3 mm (electronic flying saw)
Overall dimension :length 150,000mm
Images
FAQ
How do you guarantee the quality?
We can provided CE certificate if we are required.
What's the delivery time?
around 120days after receive your 30% payment.
Where can we see your machines?
You are welcome to visit our factory and test it by yourself.
- Q:What is the surface rolling forming machine process?
- Different from cutting, mirror rolling is a kind of plastic processing. Not only is the rolling workpiece surface roughness moment can reach Ry0.1-0.8 m, and the wear resistance of the surface hardening process has been improved at the same time fatigue strength also increased 30% advantages in cutting can not get.
- Q:Improvement in rolling forming process
- It is difficult to control the rolling process and can cause waste easily.
- Q:A roll forming machine, rolling out of the length is always not up to a fixed size, not too small, that is, more than that, what is the cause?
- According to my experience, there should be a problem with the boot encoder (also known as the digital wheel). Thank you. I hope I can help you.
- Q:What kind of material and what heat treatment are used for pressing roller (molding, feeding, cutting force, heavy load, heavy load) of sheet steel rolling machine?
- Generally speaking, to consider the use of rollers in the requirements, including: 1., good wear resistance, 2. toughness, 3., high hardness, 4. hardened layer (easy to wear after repeated repair)
- Q:Process mould for rolling forming process
- Rolling forming is more complicated and requires higher than rolling thread. The die design is based on the different shapes of the workpiece, the design of the rolling plate into a cross section or a few sections, can use synchronous type; also can use grading type.
- Q:What is rolling forming processing?
- Rolling process is a kind of pressure finishing, which is a kind of cold plastic characteristic of metal under normal condition.
- Q:Material and equipment for roll forming process
- The most common type of roll forming is reciprocating flat wire twisting machine. Therefore, for the manufacturers of cold heading machines and screw rolling mills, the design of rolling dies is only a matter of design.
- Q:Introduction of roll forming process
- With the progress of technology and the development of production, more and more attention has been paid to the roll forming process.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
LW1600 Cold Forming Mill roll forming machine
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 100 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
