Q:3 meter tall courtyard lamp foundation specifications?

Conventional garden lamp foundation is generally 1/10 of the lamppost height, that is, 3 meters courtyard lamp, conventional foundation 30CM, but if you need to install in wetlands and water, you need to increase the height of the foundation.

Q:How many watts of energy saving lamps are suitable for the three meter courtyard lamp? How many watts of LED?

The same brightness, if LED to 10W, energy-saving lamps about 30-40W, incandescent lamp to 100W, three meters height 10W enough, solar street lights 5 meters high, only to use 12W, it is very bright

Q:Landscape garden courtyard lights, lawn lights, buried lights, plug lights, the general election of what light source?

Golden halogen lamp or LED lamp, cold light source is best, warm light source is still used in landscape

Q:How to determine the power of LED street light?

If the LED street lamp is a block of chip, it can be installed according to the height and brightness of the street lamp, and then it can be estimated that each block is 30W/50/100W

Q:How to install the garden lamp?

Affordable solar garden lamp factory, it is suggested that you can go to Huangchuan Limin technology solar street lamp factory, you can customize the production of a number of solar garden lights.

Q:How about the installation and subsequent maintenance of LED garden lamp?

The installation of courtyard lighting should be made of small power, high color, high pressure sodium lamp, metal halide lamp, energy saving lamp and LED lamp.

Q:How much is the solar garden lamp?

Finally, some LED streetlights do not heat well:The 1.LED light source has great thermal resistance, and the heat of the light source can not be dispersed. The use of heat conductive paste will cause the cooling movement to fail.2. using aluminum substrate as the PCB connection light source, because the aluminum substrate has multiple thermal resistance, the light source heat transfer, the use of heat conductive paste will make the heat dissipation movement failed.3. no room for the light emitting surface of the thermal buffer, LED light source will cause heat failure, failure in advance.

Q:Brand solar garden lamp which is good?

Depends on what brand does not shape, the market depends on the use of solar panels, monocrystalline monocrystalline silicon power generation panels, relatively look at the battery, storage battery to choose the brand, its main inverter selection of monocrystalline silicon, mainly to see the photoelectric conversion rate higher

Q:Introduction to garden lamp components

Fluorescent lamp, energy-saving lamp is a low pressure mercury vapor arc discharge lamp, usually long, at each end of an electrode. The lamp contains mercury vapor with low pressure and a small amount of inert gas, and the inner surface of the tube is coated with phosphor powder. Fluorescent lamps are divided into straight tube fluorescent lamps and compact fluorescent lamps. Straight tube fluorescent lamp according to the starting mode can be divided into preheating start, fast start and instantaneous start several, according to the tube can be divided into T12, T8, T5 several. Compact fluorescent lamps are developed for use in power hungry incandescent lamps with low energy consumption and long life. Ordinary incandescent lamp life is only 1000 hours, compact fluorescent lamp typical life of 8000-10000 hours.

Q:How can the LED outdoor lamp be grounded?

When electrons and holes are combined, they can radiate visible light, so they can be used to make light-emitting diodes. In circuits and instruments, as an indicator, or in combination with text or digital display. GaAs diodes glow diode gap, green silicon carbide, yellow light diode, light emitting diode gan. Because of the chemical properties and organic light-emitting diode OLED and inorganic light-emitting diode LED.