Q:Does the flywheel ring gear and the starting machine affect the vehicle?

Inspection and adjustment of flywheel deflectionAfter the crankshaft and flywheel are mounted on the cylinder block, the deflection of the flywheel is checked on the working surface of the flywheel. As shown in figures 2, 27 and 1. The flywheel rotates for one week, and the swing of the pointer shall not exceed 0.05mm to ensure the balance between the crankshaft and the flywheel, and to reduce the wear of the clutch parts. Surface scratches can be removed by simple machining. The damaged flywheel shall be replaced.

Q:The roller is assembled by a certain number of rollers and roller racks, and the rollers roll on the tooth surface of the rack when engaged

The roller is composed of a certain number of roller and roller assembly, engaged in roller rack on the tooth surface, which greatly reduces the friction engagement, improve meshing accuracy, reduce wear; the toothed rack and the gear ring is designed according to the characteristics of rolling wheel, involute shape different from universal rack, better able to engage and roller

Q:Why does the radial runout of the gear ring reveal only the geometric eccentricity of the gear?

That's one of the main reasons:1, the material uniformity is poor.

Q:What is the function of the toothed ring clamp in the die?

So that the material in the shear zone is in the three direction compressive stress state; the material is pressed to avoid the bending and tensile deformation of the sheet metal; after the blanking is finished, the material is discharged again

Q:What are the factors that affect the radial runout of gear ring?

Material refers to the material used for the parts, physical properties and heat treatment indicators. Ring means whether the equipment is in accordance with the design requirements. In general, human factors are the first and all other factors are inseparable from human factors.

Q:Flywheel ring gear with 167 teeth with several teeth motor

This can not be randomly selected, choose one of the teeth are seriously affected motor use, may burn

Q:What is the clearance between the sensor and the gear ring?

In ensuring that the gears do not come into contact, the sensor is installed as close as possible to ensure that the sensors work properly.

Q:Such as the title, consult an expert with us auto parts "flywheel and gear ring assembly" pressing method. At present there is no mature cold pressing process???Yes, press assembly, gear ring to match with the flywheel, not the gear ring fault analysis!? is there a cold pressing?

The common damage forms of engine crankshaft include shaft neck wear, crack, burn, bend or break.Inspection methods are given, such as repair dimension method, surfacing welding, arc spraying, brush plating and manual arc welding. The cause of the starter and the flywheel gear meshing. The ring gear and the starter gear will strike when starting the engine, causing tooth damage or side wear of the tooth. If the tooth is damaged or worn more than three times, the starter gear is difficult to mesh with the ring teeth...

Q:What is the main reason for the radial runout tolerance of gear ring?

3, the tool scene is larger, or the center of rotation of the tool axis and geometric center error is larger.

Q:Can the planetary gear reducer require no gear ring? The solar wheel is active and the planet carrier outputs

Transmission diagram (4) 5 shift operation component is arranged in the Simpson planet gear mechanism (2 clutches and 2 brakes and 1 one-way overdrive clutch), to be a planetary gearbox with 3 forward and 1 reverse gear, the 5 gear shift operation module the layout as shown in Figure 7-5, C1 is used to connect the clutch input shaft and the clutch wheel assembly before and after the sun, C2 is used to connect the input shaft and the ring gear, brake for B1 solid was fixed after the planet carrier, B before and after the sun wheel brake assembly, brake speed clutch F11 B2 and Dan Xiangchao and B2 can use the band brake or disc brake. Simpson type 3 gear planetary gear box gear lever position and operation assembly worksheet