High Chrome Grinding Media Ball for Mine and Cement Use with Very Good Quality
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 25M.T. m.t.
- Supply Capability:
- 150,000M.T. m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
High Chrome Grinding Media Ball for Mine and Cement Use with Very Good Quality
1) Specifications for High Chrome Grinding Media Ball for Mine and Cement Use with Very Good Quality
No. | Diameter (mm) | Weight of each (kg) | Pcs/ton |
1 | Ø20 | 0.0322 | 31056 |
2 | Ø25 | 0.063 | 15873 |
3 | Ø30 | 0.11 | 9091 |
4 | Ø40 | 0.257 | 3891 |
5 | Ø50 | 0.50 | 2000 |
6 | Ø60 | 0.867 | 1153 |
7 | Ø70 | 1.37 | 729 |
8 | Ø80 | 2.05 | 487 |
9 | Ø90 | 2.90 | 345 |
10 | Ø100 | 4.00 | 250 |
11 | Ø110 | 5.30 | 188 |
12 | Ø120 | 6.80 | 147 |
13 | Ø125 | 7.75 | 129 |
14 | Ø130 | 8.74 | 114 |
2) Chemical Composition for High Chrome Grinding Media Ball for Mine and Cement Use with Very Good Quality
PRODUCT | BRAND | Chemical composition(%) | ||||||||
| | | C | Si | Mn | Cr | Mo | Cu | Ni | P | S |
Special high chrome casting iron ball | ZQCr26 | 2.0-3.3 | ≤1.2 | 0.3-1.5 | >23.0-30.0 | 0-3.0 | 0-1.2 | 0-1.5 | ≤0.10 | ≤0.06 |
Special high chrome casting iron ball | ZQCr20 | 2.0-3.3 | ≤1.2 | 0.3-1.5 | >18.0-23.0 | 0-3.0 | 0-1.2 | 0-1.5 | ≤0.10 | ≤0.06 |
Special high chrome casting iron ball | ZQCr15 | 2.0-3.3 | ≤1.2 | 0.3-1.5 | >14.0-18.0 | 0-3.0 | 0-1.2 | 0-1.5 | ≤0.10 | ≤0.06 |
High chrome casting iron ball | ZQCr12 | 2.0-3.3 | ≤1.2 | 0.3-1.5 | >10.0-14.0 | 0-3.0 | 0-1.2 | 0-1.5 | ≤0.10 | ≤0.06 |
High chrome casting iron ball | ZQCr8 | 2.1-3.3 | ≤2.2 | 0.3-1.5 | 7.0-10.0 | 0-1.0 | 0-0.8 | - | ≤0.10 | ≤0.06 |
Middle chrome casting iron ball | ZQCr5 | 2.1-3.3 | ≤1.5 | 0.3-1.5 | 4.0-6.0 | 0-1.0 | 0-0.8 | - | ≤0.10 | ≤0.10 |
Low chrome casting iron ball | ZQCr2 | 2.1-3.6 | ≤1.5 | 0.3-1.5 | 1.0-3.0 | 0-1.0 | 0-0.8 | - | ≤0.10 | ≤0.10 |
Casting ball | ZQQTB | 3.2-3.8 | 2.0-3.5 | 2.0-3.0 | - | - | - | - | ≤0.10 | ≤0.03 |
Casting ball | ZQQTM | 3.2-3.8 | 2.0-3.5 | 2.0-3.0 | - | - | - | - | ≤0.10 | ≤0.03 |
3) Application for High Chrome Grinding Media Ball for Mine and Cement Use with Very Good Quality
Cement building materials, metal mining, coal paste thermal power plants, chemical engineering, ceramic coating, light industry, magnetic materials
4) Testing Insurance High Chrome Grinding Media Ball for Mine and Cement Use with Very Good Quality
5) Packing for High Chrome Grinding Media Ball for Mine and Cement Use with Very Good Quality
- Q:Why does the precision casting factory not usually make iron castings?
- The so-called precision parts is the size, roughness requirements of the piece. Cast iron parts generally do not reach the accuracy.
- Q:Why do cheap cars like stamping parts instead of casting parts?
- The difference between automobile stamping parts and castingsAs the saying goes, there will be progress in comparison. In fact, through comparison, we can find the advantages and disadvantages of both. Next, we will talk about the difference between car stamping parts and castings.Looking for national casting orders, ductile iron castings, purchasing castings, foundry orders, and consulting foundry technology issuesCasting order networkAutomotive stamping parts are widely used in every field of our life, including some electronic components, auto parts, decorative materials and so on.
- Q:How can the casting be free of trachoma?
- Measures for the prevention of trachoma in castings:1, sand compaction to high, paint two times;
- Q:The difference between cement sand castings, resin sand castings and vacuum casting parts
- The clay wet sand castings casting weight from a few kilograms until tens of kilograms, but the clay dry type of casting production can be weighed dozens of tons.For medium and large castings, cast iron, cast steel can be self hardening sand with resin can be water glass sand production, can obtain the precise size, smooth surface castings, but casting precision, surface roughness, density and microstructure, mechanical properties and material cost of sand casting production is often poor, so when the higher performance requirements of castings, should adopt other casting methods, such as casting (lost wax casting), die casting, low pressure casting.
- Q:Which surface is coarser for cast iron or cast steel castings? Why?
- The surface of the steel is more rough, because the coating sand cast steel cast iron particles compared with graphite coating degree, the other one is to get a better air permeability and collapsibility of sand, the compaction degree is smaller than iron.
- Q:Where is the precision casting factory?
- Shandong, DongyingThe birthplace of precision casting
- Q:When there is no flaw detection for large casting parts, is there any crack inside?
- According to the industry standards, within the scope of the standard requirements to determine whether the product is qualified
- Q:the parts of the threaded hole is casting, casting the hole directly, and then tapping or casting, and then punch 10When the casting is ready, punch it again before tapping it Is the hole casting good or is it punched and tapped on the drilling machine after casting?
- There are several casesThe first hole with a diameter of less than 4MM is generally not done, or as a hole location only for a period of less than 10MM.Second for the big hole, some of the reasons for the holding force, we must increase the slope, direct tapping is unlikely, so it still needs post-processingThird for products with high tightness requirements, some cores need to be made even if they are very small, so they can be tapped directlyFourth, some due to technical requirements, regardless of the size of each other's requirements must be made, there is no wayThe above methods are common, and they will encounter many small problems in actual production.
- Q:Would you please tell me how to use casting parts for a year?The cast of an aircraft wing needs to be put aside for a year before it breaks;Does anyone know why?
- 2, heat aging (artificial aging), also known as stress annealing, is to heat the casting to 550-650 degrees, insulation 2 - 4h, with the furnace cooling to 150 - 200T, and then baked.
- Q:What are the casting parts tested?
- The surface brightness, appearance, size, chemical composition, weight, material, surface defects, internal defects, seals need to be checked, leakage, etc.
1. Manufacturer Overview |
|
|---|---|
| Location | Zhangqiu, China |
| Year Established | 1995 |
| Annual Output Value | 150,000M.T. |
| Main Markets | 40%,South America; 30%,South Africa; 15%,Southeast Asia; 5%, Europe Area; 5%, North America; 5%, Other Areas |
| Company Certifications | ISO9001:2008;SGS Test Report |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | Qingdao;Tianjin |
| Export Percentage | |
| No.of Employees in Trade Department | 25 |
| Language Spoken: | English, Chinese |
| b)Factory Information | |
| Factory Size: | 68,000m2 |
| No. of Production Lines | 15 |
| Contract Manufacturing | |
| Product Price Range | $700/M.T.-$1200/M.T. |
Send your message to us
High Chrome Grinding Media Ball for Mine and Cement Use with Very Good Quality
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 25M.T. m.t.
- Supply Capability:
- 150,000M.T. m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
