Heat Insulation Refractory Ceramic Fiber Bulk
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m.t.
- Supply Capability:
- 10000000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Description:
Fibre bulks also provide stability and resistance to chemical attack, however, exceptions include hydrofluoric acid, phosphoric acid and strong alkalies (i.e. NaOH, KOH).
Fibre bulks are unaffected by incidental spills of oil or water and their thermal and physical properties are restored after drying. They are designed from raw material Calcium-Magnesium-Silicate (CMS) and can be altered to achieve a customer’s desired properties of fibre diameter, shot content, fibre length and form.
Fibre bulks have excellent features such as low biopersistance and heat storage, thermal stability and god resistance to tearing. This material is flexible and resilient, immune to thermal shock and has an excellent thermal insulating
performance.
These bulks are ideally suited to individual applications and are available in chopped, un-chopped, lubricated, non-lubricated forms. The maximum continuous use temperature depends on the application.
Application:
- Raw material of secondary ceramic fiber products e.g. blanket, paper, board, shapes…
- Expansion joint seal
- Temporary repair of insulation
- Loose insulating fill for complex spaces and areas where access is difficult
- Fiber reinforcement for insulating concretes and cements.
Item | 1260 Bulk | 1400 Bulk | 1450 Bulk | 1600 Bulk |
Classification temperature ( °C) | 1260 | 1400 | 1500 | 1600 |
Melting point ( °C) | 1760 | 1700 | 1760 | - |
Colour | White | White | Blue gree | White |
Fiber diameter ( u m) | 2.8 | 2.8 | 2.8 | 3.1 |
Fiber length (mm) | ~250 | ~250 | ~150 | ~100 |
Specific gravity (Kg/m3) | 2600 | 2600 | 2650 | 3100 |
Shot content(>212 micro meter) (%) | 18 | 18 | ||
Thermal conductivity Kcal/mh °C (W/mK) ,ASTM C201, 190kg/m3 | ||||
mean 400°C | 0.08 | 0.08 | ||
mean 600°C | 0.12 | 0.12 | ||
mean 800°C | 0.16 | 0.16 | ||
mean1000°C | 0.23 | |||
Chemical composition | ||||
Al2O3 | 47.1 | 35.0 | 40.0 | 72 |
SiO2 | 52.3 | 49.7 | 58.1 | 28 |
ZrO2 | 15.0 | |||
Cr2O3 | 1.8 | |||
Packing(Kg/box) | 10,20 |
FAQ
Q1: How do you control the products quality?
A1: With strict quality control system throughout the materials selection and production process, our refractory and ceramic fiber products quality is effectively controlled to meet customer requirements.
Q5: Can you give me a brief introduction of the application of your products?
A5: CNBM (China National Building Material) core refractory business comprises the production, sale and installation of high-grade refractory products, the development and implementation of customized system solutions as well as rendering outstanding services for the key industries in Glass, Iron& Steel, Petrochemical, Cement, Ceramic and Nonferrous Metals
- Q:Is aluminum silicate fiber poisonous?
- Then use the compressed air jet or use the wire throwing machine to turn the yarn into a fiber. After the cotton collector sets the cotton, it forms the ceramic fiber cotton. In the whole process of production, it can be found that the raw material does not contain toxic substances. Compared with asbestos, it is a substitute product of asbestos and contains no carcinogens.
- Q:Aluminum silicate ceramic fiber cotton smoke will cause pneumoconiosis?
- 1, general masks, gauze, masks, etc., can not be used as dust masks.2, mask must pass GB 2626-2006 standard certification.3, it is recommended to choose N100 class dust masks.4, individual suggestions according to choose different shapes masks.5, it is recommended to change the filter gauze mask. Material recommended for silicone material.Through the above way, it can effectively prevent pneumoconiosis.
- Q:Glass fiber cotton, aluminum silicate cotton, rock wool, what's the difference between these three?
- Three kinds of materials are heat insulation materials, applications and temperature resistance is different.Glass fiber cotton is a kind of excellent performance of inorganic non-metallic materials, variety, has the advantages of good insulation, strong heat resistance, good corrosion resistance, high mechanical strength, but the disadvantage is brittle, poor wear resistance, the maximum temperature of four less than Baidu.
- Q:The difference between the ceramic fiber blanket and rock cotton blanket
- The heat capacity (heat storage capacity) of ceramic fiber lining is low: the heat capacity of ceramic fiber is only about l/10 of light heat resistant lining and light castable lining, and the heat capacity of lining material is proportional to the weight of lining. Low heat capacity means the furnace in the reciprocating operation absorb less heat and heating speed, greatly reducing the operational control of the temperature in energy consumption, especially for heating furnace and furnace, furnace shutdown has obvious energy saving effect.
- Q:Is the ceramic fiber cloth poisonous?
- Ceramic fiber clothProduct introduction.Ceramic fiber products with excellent heat resistance, with heat-resistant alloy reinforced aluminum silicate dimensional textiles, continuous use temperature of 1000 degrees, excellent acid resistance and oil, water vapor corrosion capacity.
- Q:What are the main differences between an ordinary furnace and a ceramic fiber furnace?
- Energy saving: ordinary furnace heat loss, heat rate, furnace insulation can. The holding time of ceramic fiber furnace is ten times higher than that of ordinary furnace, and it is easy to quench and quench.
- Q:What is the good heat insulation effect of glass fiber and aluminum silicate fiber, what are their respective advantages and disadvantages?
- Adiabatic effect: glass fiber thermal conductivity at room temperature was about 0.056, the thermal conductivity at room temperature is about 0.035, due to the lower thermal conductivity, moisturizing effect is better, so the material characteristics of aluminum silicate fiber insulation effect is good, but also with the insulation effect of fiber compression density, can not be generalized.
- Q:What is the density of ceramic fiber modules? The best insulation effect
- Ceramic fiber module density is only a standard in the world, is 220Kg/m fand, but in the actual application, according to the heat treatment furnace, furnace temperature, combustion medium, temperature rise requirement of ceramic fiber module density in 200-240Kg/m fand, ceramic fiber blanket, because the processing of ceramic fiber module uses double roller today advanced technology and technology of silk, fiber length of the ceramic fiber blanket which produced in 80-130 mm, so the maximum density of the ceramic fiber module is more than the density, 240Kg/m fand, a large amount of fiber fracture, the fracture rate is as high as 48%. So after the actual verification at home and abroad of tens of thousands of industrial furnaces, the best density of ceramic fiber module is fand 220Kg/m.
- Q:Aluminum silicate needle carpet and ceramic fiber insulation performance of the good
- Aluminum silicate needle carpet should be aluminum silicate needled blanket, with the continuous production, by acupuncture fiber uniformity, high tensile strength, does not contain any additives. Ceramic fiber, also known as aluminum silicate fiber, is only a different name.
- Q:What is the diameter of the ceramic fiber? How to mix?
- Fiber diameter: rejection fiber more coarse, rejection fiber generally 3.0-5.0 - m, spinneret fiber is generally 2.0-3.0 - m;
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Heat Insulation Refractory Ceramic Fiber Bulk
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m.t.
- Supply Capability:
- 10000000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords