GRP FRP GFRP Composite profiles pultrusion Machine and frp rebar machine
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 set
- Supply Capability:
- 5000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Applications:
The products are widely applied to green house, skylight, porch, door, sandwich panel,
ceiling, transportation body, concrete form and liner panels.
Product Advantages:
1.It adopts advanced mechanical structures & technilogy. It has achieved domestic advanced level with advanced technology and reasonable craft, high degree automation and high outputs.
2.It is PLC digital control,including resin feeding.It can achieve vacuum charging resin to doctor blade.Even mixture, easy cleaning and more automation.
3.Easy operation, low noise, obvious electricity conservation, small size, compact structure, low energy consumption, high durability, good looking, etc.
4.Combined with powder collector to absorb the harmful substances to keep the healthy of the worker and prolong the service life of the machine.
5.Increase the operation rate of the material and lower the cost
Main Product Features:
1. Easy operation based on PLC intellectual control system. Only short-term training
can make operators complete production independently.
2. Unique arithmetic on temperature control makes oven heating fast, temperature control
precise. Which improve quality of products, reduce energy consumption and shorten the
preparing time effectively.
3. Roving chopper speed can be synchronous with the production line.
4. Special cross cutting machine and good synchronization performance make cutting accurately.
5. All the machine parts adopt international standard steel make machine with high stability.
6. System failure can be automatically alarmed and show fault point. Make maintenance easily.
7. Particular parts adopt special purpose wire, durable in use.
8. Size and layout of machine can be made according to customer requirements.
Basic Parameter:
Name | GRP FRP GFRP Composite profiles pultrusion Machine and frp rebar machine |
Power Supply | 380V |
Main Frame | 350 H-Beam |
Main Power | 37kw |
Pump Power | 3kw |
Forming Speed | 10 m/min |
Roll Station | Upper Level 11 Stands, Down Level 11 Stands |
Roller Diameter | 70mm |
Hydraulic Pressure | 10-12 MPa |
Forming Size | 840mm, 900mm |
Feeding Thickness | 0.3-1.2mm |
Feeding Width | 1000mm |
Backboard Thickness | 14mm, 16mm |
Chain Size | 20mm |
Cutter Standard | Cr12 |
Roller Standard | Cr12 |
Cr-Plating Size | 0.05mm |
Overall Size | 7500*1700*1300mm |
Total Weight | 10t |
FAQ:
A:- What service can you provide before order?
- About the pre-sale service. We provide you answers of all your questions on our machines, such as technical parameter, price, payment terms, ect. If you wanna visit our factory and check the machines, we also can send you invitation letter and give you our warmest welcome.
B:- Can you finish the machine during the delivery time?
- We will finish the machine in time according to determined lead time.
C:- Can you provide some spare parts?
- Yes, of course. The quick-wear parts are sent to you together with the machine.
D:- What is the after- sale service?
- About the after-sales service. We can send technician to your country to fix the machine.The buyer should bear all the cost including: visa , Roundtrip ticket and suitable accommodation, also buyer should pay the salary 80USD/day.
The warranty is one year. and we will provide the technical support for the whole life. It is free to maintain the machine the first year after buying, including changing the main components. The first year hence, you will pay for our technician $50 per day to maintain the machine. And the components are not free, if you need to get it from us.
E:- Any other service?
- We can manufacture, design, installation and debug various roll forming machines including standard and customized machines.
It is free to assemble machine and train your works, but the buyer should pay for the round-trip airplane ticket, and arrange accommodation during that time.
F:- Can you accept OEM?
- We can accept OEM.
Product Pictures:
- Q:What is the function of adding filler in the processing of plastic products?
- See what kind of filler you add, different products, different filler properties are not the same
- Q:Plastics are processed into raw materials. How much raw material and energy do we need to process a kilogram of plastic?
- Is the necessary equipment for extrusion blow molding machine, you must first set up the company, production workshop, production equipment, testing equipment, inspection personnel and production licenses for the government, as the raw material is plastic particles, costs and profits can not be known, see you how to operate.
- Q:How does a lathe process a plastic flowerpot mold?
- The plastic flowerpot is made by plastic injection molding process, there must be a pot of injection mould, including mold cavity, guide column, return rod, push rod, plate, fixed plate, die angle, pouring mouth, bolts and other components, in the process of production and processing in addition to use lathe, planer, milling machine, grinding machine is also used, drilling and other equipment.
- Q:I would like to open a waste plastics processing granules factory, to those techniques and attention. What are the processes?
- Two, how to purchase, buy what kind of machine?.1, with a machine, double screw feed2 、 the gear box is better, the gears inside must be treated by heat treatment, and the bearings can be adjusted3, gear box, screw, barrel and die and wear parts to the strength of life, to ensure that more than 1 years4. The main parts should be made of standard material5, reducer and motor purchase, professional manufacturers, production kits, do not buy granulator manufacturers to assemble their own6, to have power distribution cabinet7, the equipment is the most critical screw and barrel, good quality8, washing machine must be continuous production, without stopping water change, cleaning pool, otherwise the efficiency is very low9, heating to subsection, paragraph heating to uniform control10, there should be a matching waste plastic cleaning machine, the use of recycled water, do not waste water11, electricity saving, not more than 300 degrees per ton12, the machine's length diameter ratio can not exceed 20 (in 16:1 - 20:1 is appropriate), that is to say, the screw length is 16 to 20 times the diameter of the screw13, the model may not be small 100, the greater the output14, should have double exhaust15, the heating power of the flange (die head) of the granulator is very important, and it should be designed according to 2.5W per square centimeter (sectional area)
- Q:The next 5 to 10 years, small workshops waste plastics processing prospects for development?
- Reference to prospective Industries Research InstituteAnalysis of production demand and investment forecast of modified plastics industry in China in 2015-2020The plastic machinery industry is the machinery manufacturing industry which provides important technical equipment for the plastic raw material industry and the plastic products processing industry. It is the floorboard of all kinds of machinery and equipment used in the plastics processing industry. After years of development, China's plastic machinery industry has initially formed a relatively centralized production cluster. Mainly distributed in Bohai, the Yangtze River Delta and the Pearl River Delta three regions.Since twenty-first Century, China's plastic machinery industry has been sustained and rapid development, is one of the fastest growing industries in the country, the main economic indicators among the forefront of the national machinery industry. With the development of chemical, mechanical, electronic and other related technologies, the status of plastics and plastic machinery in human economic life will be further improved. Plastic machinery enters our country to develop industry with advantages. China's plastic machinery industry has gone through years of entrepreneurship and development. Production enterprises are mainly located in the coastal areas of Southern China and East China, employing tens of thousands of technical level to improve rapidly, and achieved good sales performance in the international and domestic markets. The main products of the plastic machine industry overall upward market image. Industrial output value, sales and profits and taxes have been increasing at the same pace. Overall, plastic machinery has entered the ranks of China's dominant development industry.
- Q:Plastic machinery plastic pellet production process _ particles recycled plastics particles
- 16 、 domestic garbage plastic particle flotation device17 、 granular plastics dehumidification drying system18. Methods for the preparation of colored plastics or colored polymeric particles19. A method for producing a particulate formulation that is soluble in a plastic stain20. The spherical particles are prepared by the plastic melt21. Lactam based pigments and their use in the production of colored plastics or polymeric colored particles22. Methods for producing colored plastics or polymeric colored particles23, columnar particles of plastic compound additive, production process and application thereof24, manufacturing method of waste plastic particles and thermal decomposition method thereof25. The preparation of colored plastic or polymer dye granules26. Azo dyes, their preparation methods and their applications in the manufacture of colored plastics or polymers, colouring particles, and dyeing or printing of hydrophobic fiber materials27, pyridine ketone dye, process for the preparation thereof, and use in the manufacture of colored plastic or polymer colored particles28, pyridine ketone dye, process for the preparation thereof, and use thereof in the preparation of colored plastics or polymeric colorant particles29. Coating compositions of thermoplastic resin particles for forming foam containers30. Adsorption dryer for plastic material particles
- Q:Do waste plastics recycling processing, the state subsidies, and now the prospects are good?
- Plastic machinery production of this piece, I personally think that Shandong is still a lot of production enterprises. All regions have done, and quite a lot, forming a production chain of processing. Shandong outstanding people, saints land, people are very real. Suggest that you go to Shandong site visits, compared to, not light, cheap, the most important thing is to look at the quality of the machine, after-sales service. Just like my friend bought a machine, the price is not very cheap, but the quality of the machine is good, and there is nothing wrong with it.
- Q:I did not come into contact with the plastic design, to understand the mechanical design and traditional design of plastic parts and fittings of the (metal material) are different, from what kind of material, design, drawing standards, labeling etc.. Please engage in plastic design industry heroes pointing!
- Material selection, according to experience, can not, then check the mechanical manual, drawing standards are also divided into metal box, plastic? Without distinction. In fact, the plastic design and metal design, the key lies in what is their manufacturing process! I don't see how long your mechanical design of metal has been done!I hope my answer will help you. Thank you for taking it
- Q:Is there any pollution in the processing of plastic raw materials?
- Yes, we have.The plastic itself contains chemicals, in the production process, will react with other substances, produce some odor and so on, so in the production environment must be ventilated, and will produce gas in the process of mechanical production, in production and after the residue, waste water and so on, these are the production of pollution.
- Q:How much profit can a ton earn? Is it difficult to operate the program?
- This machine is mainly used for classification, after crushing, washing, dewatering and drying of PET sheet for processing our company successfully developed a new generation of "PET bottle recycling unit, this machine adopts fully closed, the whole production process without spray, no noise, waste bottle with PET as raw material. With high yield: SJL150 type can produce about 400 kilograms per hour, the product quality is good: the particles are white, transparent, good color, low energy consumption.Selection process: coke bottle, oil bottle, mineral water bottles and other various beverage bottles and etc.. 1. the outside trademark tear, these trademarks are mostly PVC, namely PVC shrink film 2. second were crushed, began to shatter the heart must bring water flushing to some other 3. other third step of removing sludge washed 4. refractory impurities fourth steps and then washed with water to the dryer to dry the water bag 5. (ball) into the vacuum oven drying 6. spinneret, setting 7. hot water steam shift extension, setting 8. wire into the packaging machine packing label factory after weighing 9.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
GRP FRP GFRP Composite profiles pultrusion Machine and frp rebar machine
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 set
- Supply Capability:
- 5000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
