Galvanized Concertina Razor Wire for Fence with (CE and SGS)
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 m.t.
- Supply Capability:
- 5000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Item specifice
Razor Wire is the galvanized strip combined with the core wire, to form continuous spirals of various diameters, which are then clipped together with heavy duty clips. These coils are collapsible for trasport and then expanded and fastened for use.
Razor wire can be used in conjunction with an existing wall or fence, or even installed as a barrier on its own, to create an effective security perimeter.
Razor Blade Type: BTO-12, BTO-18, BTO-22, BTO-28, BTO-30, CBT-60, CBT-65
Material: Hot dipped galvanized steel sheet and wire, stainless steel sheet and wire 430 or 304.
The length and the diameter of the coil can be designed as per the customers' need.
Razor Wire offered by us is suitable for industry, agriculture, animal husbandry or fencing
Packing: Carton/PP woven cloth/Pallet or loose packing
Razor barbed tape is a kind of modern security fencing material fabricated with razor-sharp steel blade and high-tensile wire.
Razor wire presentation form: Concertina coils type, single coil razor wire, straight type razor wire, razor wire mesh fence
1. Crossed razor wire
Two pieces of stainless razor wire or zinc-coated razor wire wer bounded together by clips to make it more strength.
The spiral intersecting barbed wire presents an intersecting shape after
2. Single barbed wire
Single coil barbed type wire is installed without clips, it runs in natural loops on walls. Costless and can be easily installed.
3. Straight razor barbed wire
There are many ways for straight type razor wire installing. The straight type razor wire can be installed quickly. It can not only save expenditure but also reach the result of frightening and stopping.
4. Razor wire mesh fence
Welded razor mesh fence is a new form of razor barbed wire mesh for security with practicality blade and the feature looks very beautiful. It can be used for guard net of fence, doors and windows and also can be used in military. The specification can be designed as the customers' need.
5. Razor wire usage:
Maily serves in protecting of grass boundary, railway, highway and also widely used in military, jail and other national security organizations, and industry, agriculture, animal husbandry, dwelling house, also used as fence for cottage as society fence and other private buildings.Specification:
BTO-12, BTO-18, BTO-22, CBT-60, CBT-65
Razor blade specification:
Reference No.: BTO-22
Wire Dia.: 2.5 mm -+ 0.1
Thickness (razor blade): 0.5 mm -+ 0.05
Barb length (razor blade): 22 mm -+ 1
Barb width (razor blade): 15 mm -+ 1
Barb spacing (razor blade): 34 mm -+ 1
Barbed type wire specification:
Outside diameter: 900mm
No. Of loops: 36 loops
Stander length per coil: 9 V 10M (5 clips)
Type: BTO- 22
Note: Concertina crossed type razor barbed
C-Other details:
Weight: 10 kg/coil (maximum)
Tensile: 600-700 N/mm2
Zinc content: Wire G. I 12-15 G/M2
Blade Type | Thickness | Wire Dia. | Barb Length | Barb Width | Barb Spacing |
BTO-10 | 0.5MM+/-0.05 | 2.5MM+/-0.1 | 10MM+/-1 | 15MM+/-1 | 26MM+/-1 |
BTO-12 | 0.5MM+/-0.05 | 2.5MM+/-0.1 | 12MM+/-1 | 15MM+/-1 | 26MM+/-1 |
BTO-18 | 0.5MM+/-0.05 | 2.5MM+/-0.1 | 18MM+/-1 | 15MM+/-1 | 38MM+/-1 |
BTO-22 | 0.5MM+/-0.05 | 2.5MM+/-0.1 | 22MM+/-1 | 15MM+/-1 | 38MM+/-1 |
BTO-28 | 0.5MM+/-0.05 | 2.5MM | 28MM+/-1 | 15MM | 53MM+/-1 |
BTO-30 | 0.5MM+/-0.05 | 2.5MM | 30MM+/-1 | 21MM | 54MM+/-1 |
CBT-60 | 0.6MM+/-0.05 | 2.5MM+/-0.1 | 60MM+/-2 | 32MM+/-1 | 102MM+/-1 |
CBT-65 | 0.6MM+/-0.05 | 2.5MM+/-0.1 | 65MM+/-2 | 21MM+/-1 | 102MM+/-1 |
Barbed Tape Wire Specification | ||||
Outside Diameter | No. of Loops | Standard Length per Coil | Type | Notes |
450mm | 33 | 7-8M | CBT-60.65 | Single coil |
500mm | 56 | 12-13M | CBT-60.65 | Single coil |
700mm | 56 | 13-14M | CBT-60.65 | Single coil |
960mm | 56 | 14-15M | CBT-60.65 | Single coil |
450mm | 56 | 8-9M (3 CLIPS) | BTO-10.12.18.22.28.30 | Cross type |
500mm | 56 | 9-10M (3 CLIPS) | BTO-10.12.18.22.28.30 | Cross type |
600mm | 56 | 10-11M (3 CLIPS) | BTO-10.12.18.22.28.30 | Cross type |
600mm | 56 | 8-10M (5 CLIPS) | BTO-10.12.18.22.28.30 | Cross type |
700mm | 56 | 10-12M (5 CLIPS) | BTO-10.12.18.22.28.30 | Cross type |
800mm | 56 | 11-13M (5 CLIPS) | BTO-10.12.18.22.28.30 | Cross type |
900mm | 56 | 12-14M (5 CLIPS) | BTO-10.12.18.22.28.30 | Cross type |
960mm | 56 | 13-15M (5 CLIPS) | BTO-10.12.18.22.28.30 | Cross type |
980mm | 56 | 14-16M (5 CLIPS) | BTO-10.12.18.22.28.30 | Cross type |
FAQ
We have organized several common questions for our clients，may help you sincerely：
①How about your Hot Dipped Galvanzied Razor Wire Galvanized Iron Wire Black Wire？
One of the most biggest manufacturer & supplier of wires and wire mesh，is a large-scale professional UAE Market Electric Galvanised Wire BWG 20 0.7mm Hot Dipped Galvnised Wire factory in China. Annually more than 10000 tons wires and wire mesh are exported to markets all over the world. Different kinds of wires and mesh are available according to customer’s requirements.
②What is your Technical Information of Hot Dipped Galvanzied Razor Wire Galvanized Iron Wire Black Wire?
1).Material: super carbon steel
2).Processing by drawing, hot-dip zinc-plating
3).Standard wire gauge from 8# to 24#
4).Thick zinc-coating layer
5).Super in corrosion resistance
6).Firm coating layer
7).Custom size available
10 to 15g Zinc Coating and 35kg Tensile Strength Iron Wire Electro Galvanized Iron Wire
③How long can we receive the product after payment?
In the purchase of Galvanized Iron Wire within three working days, We will arrange the factory delivery as soon as possible. The pacific time of receiving is related to the state and position of customers. Commonly 15 to 20 working days can be served。
Hot Dipped Galvanzied Razor Wire Galvanized Iron Wire Black Wire
- Q:My friend is buying under-wired bras and what are they and the heavily- wired bra?
- bras that have wire on the bottom to support your boobs they make your boobs look better under shirts sometimes fuller depending on the bra
- Q:Help me, please! I have an old air conditioning system...made in 1985, and the condenser fan went out. Long story short, I bought a new fan and I don't know how to hook it up. The old fan had 4 wires coming out of it: purple, black, green, and brown. The green is the ground and the brown and the purple went to the capacitor, black to power. Then there were two smaller black wires attached to the capacitor and they lead out to other components. My new fan has a green wire, a white wire, a black wire, a brown wire and a brown and white striped wire. My problem is this: I don't know where to attach the white wire or what to do with the two smaller black wires that were attached to the old capacitor. I was told by the gentleman who sold me the fan that I splice the white wire to purple wire - then do I hook that to the capacitor? What do I do with the two smaller black wires that lead out to other components??? (Cap them off???) I am confused and need some advice!
- You should send it to a qualified service agent. Air conditioners use the coolant as a lubricant for moving parts. Replacing a fan may look easy buy I believe there is a degree of calibration to consider. Especially with an AC unit from 1985.
- Q:Theres a Green Illumination wire from the factory setup, where do I connect that wire too on my aftermarket deck? Also theres a White/Blue wire that I dont know where it connects either?
- The green illumination wire controlled the dimming on the factory stereo, but it will only apply if your tuner has the same feature. If it doesn't then just put a crimp cap on it and stow it out of the way. As for the white/blue wire, I'm not sure. If you pick up a wiring diagram, such as found in the Hanes manual, it will give you the breakdown. Not all the wiring in your car needs to be hooked up, just the ones that operate the tuner's functions and audio; if everything works and there's no left over wiring from your tuner's wiring bundle, then you don't need that white/blue wire. Crimp it off and tie it up to the bundle. This should be applicable to your year: Radio Constant 12V+ Wire: Blue/Yellow Radio Switched 12V+ Wire: Gray Radio Ground Wire: Brown Radio Illumination Wire: Green Radio Dimmer Wire: N/A Radio Antenna Trigger Wire: N/A Radio Amp Trigger Wire: N/A Front Speakers Size: 4″ Front Speakers Location: Dash Left Front Speaker Wire (+): Pink Left Front Speaker Wire (-): Purple Right Front Speaker Wire (+): Purple Right Front Speaker Wire (-): Light Green Rear Speakers Size: 4″ Rear Speakers Location: Rear Deck Left Rear Speaker Wire (+): Black Left Rear Speaker Wire (-): Yellow Right Rear Speaker Wire (+): Red Right Rear Speaker Wire (-): White
- Q:In that chart it has 2 sections, one is maximum amps for chassis wiring and the other is maximum amps for power transmission. What is considered chassis wiring and what is considered power transmission?
- Chassis wiring assumes each wire is routed separately, and power wiring assumes they are wired in a bundle. In chassis wiring the cooling of the conductors is better, because they are all exposed directly to air. In a bundle, some of the wires are not in direct contact withe the air.
- Q:The black wire is called ground but what is the red wire called?
- There are standards for wire colours but they vary between countries and industries. When I grew up in the UK black was used for negative power and red for positive power (e.g. ground and +12V). But trailer wiring in Canada seems to use black for +12V, for instance. In a digital electronic circuit, using silicon semiconductors, ground or 0V is often abbreviated GND and the +ve power supply as Vcc.
- Q:im trying to install a cd player i need to know where i can hook up power(red) , constant(yellow), and my amp seems to take alot for remote wire so i need a good source for it too i also have a eq to power but dont know if it will work with the same source as the radio
- Before you go through the painful task of rewiring all your speakers, don't. Go to a stereo shop and purchase the amp bypass plug that is available for your Explorer. It will plug into the 2 plugs you pulled out of the factory amp which will allow you to connect your radio to the factory harness in the dash as normal. You also want to use the proper adapter harness in the dash for that. It will be color coded to the aftermarket radio so there will be no question as to which wire goes where. The red and yellow wires on the unit will go to the red and yellow wires on the harness.
- Q:Which wire is quot;hot, white or black?
- There is no code required or generally accepted color code for fire alarm wiring. Usually circuits for different purposes are color coded differently. For instance, initiating device circuits and notification appliance circuits.
- Q:Wire runs from breakers to a wall outlet along the garage wall
- Ok so the first two answers are almost correct. If the breaker is 20amp it's 12 gauge wire, if it's 15 amps it will be 14 gauge wire. The outlet is in a garage it must be a GFCI receptacle. That's a national electrical code requirement. If the wiring is to be exposed (ie not inside of a wall) then it must be in conduit, cheapest and easiest to install is pvc, you can run romex or NMB through conduit. If the wall is to be sheetrock when finished then you can run just romex through the studs. It is recommended that the GFCI receptacle be mounted in an extra deep box but is not required, makes it easier to get it in there with the wires. You can put up to 8 receptacles or devices, like light fixtures on one 20 amp circuit. More and you will be over loading the circuit. The romex you run should be for 20 amp 12-2 with ground. All circuits and devices must be grounded to be in compliance.
- Q:which guage power wire will handle 100 amps
- Run the 1 guage from the battery to the dist block then 4 gauge to the cap and 8 guage to the amp(s)
- Q:I have a set of two rotating beacon lights on my truck. I would like to wire these directly to the vehicle with an on/off switch. I picked up a two prong toggle switch from autozone, as well as some wire. I'm not sure how I need to do the wiring. I read somewhere about running wire from the fuse box? And how about grounding?
- Run a wire from the positive side of the battery to one of the prongs on the switch. Then attach another wire from the other prong going to the light. Take one wire from each light and wire them together. Then take the other 2 wires and wire them together. On those lights positive and negative don't matter. Now take one set of the wires you put together and attach them to the wire from the switch and the other set of wires ground them anywhere on the vehicle.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Galvanized Concertina Razor Wire for Fence with (CE and SGS)
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 m.t.
- Supply Capability:
- 5000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
