EPDM Coiled Rubber Waterproof Membrane for Roof System

Ref Price:
Loading Port:
Payment Terms:
Min Order Qty:
50000 m²
Supply Capability:
5000000 m²/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

EPDM Coiled Rubber Waterproof Membrane for Roof System


 Description Of EPDM Coiled Rubber Waterproof Membrane for Roof System:

•EPDM waterproof sheet has excellent anti-ozone-aging performance, able to resist ultraviolet light and corrosion of many chemical corrosive materials in the atmosphere
•It has high tensile strength, high ductility and strong retractility, it has excellent crack resistance, able to effect waterproof function even with tiny vibration of buildings.
• Excellent resistance to ozone, oxidation and sunlight.
• Resistance to chemicals; resistant to most inorganic products.

 Main Features of EPDM Coiled Rubber Waterproof Membrane for Roof System: 

A.Polyester based SBS Modified Bitumen Waterproofing Membrane

a. Strong impermeability

b. High tensile strength, elongation, ability to adapt the grassroots shrinkage deformation and cracking

c. Puncture-resistant, broken resistant, tear-resistant

d. The corrosion resistance, resistance to mildew, weathering good

e. Construction convenient, hot-melt can be operated Four Seasons Construction, reliable joints

Specifications of EPDM Coiled Rubber Waterproof Membrane for Roof System:


MaterialEPDM Rubber
Size1.2m (width)*20m (length) or customized, weldable type 2.05m or 4m width
Thick1.2mm, 1.5mm, 2.0mm
TypeVulcanized & Weldable
PatternNon-reinforced (homogeneous)


Applications of EPDM Coiled Rubber Waterproof Membrane for Roof System:

1. The substratum should be smooth, dry, clean, which can not have loosing and peeling phenomena.

2. Before application, clean up the basic level and eradicate the impurities.

3. Spread out the membrane on the substratum to loose sheet's stress. Use adhesive-glue to paint the substratum and the surface of membrane. When the adhesive is not sticky to hands, pave and press smoothly.

4. When pave the second volume of membrane, extrude 100mm of the edge of overlap of the first roll and do not paint with the adhesive. Pave the membrane on the substratum according to step so as to finish the whole pavement. When paving, do not tighten the waterproof membrane violently.

5. After that, use the special solvent to scrub the overlap joint. When it becomes fully dry , use the sheet glue to paint the both sides of the joint. Paint it again when it gets completely dry. Till the adhesive is not sticky to hands, press it smoothly and solidly.

6. Pay attention to fire prevention during application. Basement construction site shall be equipped with ventilation facilities


EPDM Coiled Rubber Waterproof Membrane for Roof System

EPDM Coiled Rubber Waterproof Membrane for Roof System

EPDM Coiled Rubber Waterproof Membrane for Roof Waterproof System


IMages of EPDM Coiled Rubber Waterproof Membrane for Roof System:

EPDM Coiled Rubber Waterproof Membrane for Roof Waterproof System

EPDM Coiled Rubber Waterproof Membrane for Roof Waterproof System

EPDM Coiled Rubber Waterproof Membrane for Roof Waterproof System

EPDM Coiled Rubber Waterproof Membrane for Roof Waterproof System


FAQ of EPDM Coiled Rubber Waterproof Membrane for Roof System:

1. What are we supplying?

We are specialized in producing Colorful Asphalt Roof Shingle, SBS/APP modified bitumen waterproof membrane, Self adhesive bitumen waterproof membrane, PVC waterproofing membrane, EPDM rubber roofing membrane, Single Component Polyurethane Waterproof Coating, and Spray Polyurea Waterproof Coating


2. How Many years experience do we have?
We have been exported to more than 20 countries in the past 15 years.

3. How long do we usually reply your request?

We always reply our customer within 24 hours.


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Coil waterproof roofing requirements
4, the female wall to leave a waterproof membrane head groove, the height of the project after the completion of the requirements of more than 300 flood height, the general height of 400-500 is appropriate.
Q:Why the roof of the waterproof membrane and insulation rock wool board to do between the isolation layer?
Roof on the waterproof membrane and the insulation between the rock wool board to do isolation reasons: 1, leveling layer is generally in order to make waterproof sheet paving when the formation is not empty drums, and sometimes leveling layer can also increase the bond strength of the substrate and the grassroots. But not all of the membrane paving must be done leveling layer, such as polyethylene polypropylene waterproofing membrane is a special mortar as a binder, not very uneven in the base can be directly on the construction. The insulation layer of the grassroots level is generally not leveling layer, but do nothing bad, to reduce the block insulation material porosity, improve the insulation effect and the overall strength of the insulation layer is useful.
Q:Elastomer modified asphalt waterproofing membrane for what purpose? Need to pay attention to a few things?
It is suitable for industrial protection such as roofing, basement, wall, bathroom, pool, drains, subways, caves, highways, bridges and airport runways, and is suitable for use in metal containers, Wide, excellent performance of the waterproof material, can be used as a single layer, but also layer; both hot melt construction, but also cold adhesive, glass fiber reinforced polyester felt coil can be used for mechanical fixed single layer of water, but need to Wind load test, fiberglass blanks for multi-layer waterproof bottom of the waterproof, exposed use of the upper surface of the insulating material for the opaque mineral particles of the waterproof membrane, underground engineering waterproof surface insulation material for the fine sand waterproofing membrane The Storage and transportation
Q:Whether the polyester waterproofing membrane can be used for roofing waterproofing
2, roof waterproofing is not just a layer of waterproof membrane, according to the design of the coating is usually used waterproof layer + polyester membrane waterproof layer;
Q:Is the asphalt waterproofing membrane facing the side?
3, Summary: normal self-adhesive waterproof, the bottom of the membrane bonding surface facing the surface, the wall toward the back of the water; pre-shop anti-stick, the bottom of the membrane surface facing the back surface, wall is also facing the water.
Q:On the roof of the waterproofing membrane paving the direction of what are the requirements
The direction of the web should be determined according to whether the slope of the roof and the roof is affected by vibration: when the slope of the roof is within 3%, the asphalt waterproofing membrane should be parallel to the roof; at 3% ~ 15%, the asphalt waterproofing membrane may Parallel or vertical roof paving; slope greater than 15% or by vibration of the roof, asphalt waterproofing membrane should be vertical roof paving, and polymer modified asphalt waterproof and synthetic polymer waterproofing membrane can be parallel or vertical roof paving; The upper and lower layers should not be piled with each other vertically.
Q:Why is the top cover of the basement waterproofing? While the floor has to empty shop?
Waterproof construction methods are generally reflected in the construction drawings. If not, please consult the designer. A waterproof, full of sticky. Secondary, sticky or sticky. Construction waterproof with waterproof material. According to each of the different basement waterproofing, the construction team will have its own waterproof concept and specific construction requirements.
Q:What is the resistance type SBS waterproofing membrane?
The second is chemical resistance, in the waterproofing membrane production process, adding chemical resistance agent, similar to the chemical composition of herbicides, the plant roots are not close to the waterproofing membrane; In addition, copper ions have a similar effect.
Q:What is BSB waterproofing membrane
SBS waterproofing membrane is: The thermoplastic elastomer is used as a modifier to make impregnated and coated materials, and the upper surface is covered with a polyethylene film, fine sand, mineral sheet (granule) or aluminum foil, copper foil and other insulating material made of curled sheet waterproof materials. Styrene-Butadiene-Styrene means: styrene-butadiene-styrene. SBS rubber modified petroleum asphalt for the invasion of the cover layer to polyester fiber non-woven fabrics, jute cloth, fiberglass mats were made for the fetal base, the plastic film for the anti-sticking isolation layer, the selection, ingredients, eutectic , Invasion, composite molding, curling and other processes processing production.
Q:What is the preferred level of waterproofing?
2, roof 2 waterproof: Applications: important buildings and high-rise buildings; Waterproof layer of reasonable use of life: 15 years; Waterproof layer selection of materials: should choose high polymer modified asphalt waterproofing membrane, synthetic polymer waterproofing membrane, metal sheet, synthetic polymer waterproof coating, high polymer modified asphalt waterproof coating, fine stone concrete, flat tile, linoleum Tile and other materials; Fortification requirements: two waterproof fortification.

1. Manufacturer Overview

Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range