Double Sided Tissue Tape With Hotmelt Based Adhesive
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Note: Parameters of the specification, according to ASTM D-100 test method
Dimensions
High Performance Double Sided Tape
1)Excellent adhesive and holding power,
2)Good temperature resistance.
3)OEM service
Double Sided Tape with Solvent Acrylic
PRODUCT NAME | BACKING | GLUE TYPE | THICKNESSum) | DIMENSION (mm×m) | COLOR | INITIAL TACK (mm) | PEELING STRENGTH (kg/in) | HOLDING POWER (hour) | USAGE |
DS10B | TISSUE | SOLVENT BASED ACRYLIC | 80-150 | 1020×1000 | TRANSLUCENT | ≤50 | 1.0±0.2 | ≥5 | GENERAL PURPOSE |
DS10B1 | TISSUE | SOLVENT BASED ACRYLIC | 95±5 | 1020×1000 | TRANSLUCENT | ≤100 | 1.6±0.2 | ≥6.5 | NAMEPLATE PUNCHING |
DS10B2 | TISSUE | SOLVENT BASED ACRYLIC | 95±5 | 1020×1000 | TRANSLUCENT | ≤100 | 1.8±0.2 | ≥2.5 | LEATHER |
DS10B3 | TISSUE | SOLVENT BASED ACRYLIC | 95±5 | 1020×1000 | TRANSLUCENT | ≤100 | 1.8±0.2 | ≥2.5 | EMBROIDERY |
DS10B6 | TISSUE | SOLVENT BASED ACRYLIC | 95±5 | 1020×1000 | TRANSLUCENT | ≤80 | 2.0±0.2 | ≥0.5 | EVA/FOAM |
1). material: Tissue paper Offers superior bonding strength and holding power, anti rebounding & warping
2). Provides superior sticking performance for all types of substrates, especially for objects splicing to cambered surfaces
3). Offer good adhesion at high or low temperature
4). Provides superior durability
5). High adhesion,resistant to water,chemical solvent and aging.Applicable for sticking metal.
6). Double side non-moven tissue tapes combine high performance acrylic adhesive with easy tear 7). Tissue that is widely uesd from daily life to industrial manufactural .
8). Adhesive: Acrylic; Synthetic adhesive
9). Temperature resistance: --20--140 C
10).The best substitute of 3M 9448 3M9080 nitto5000NS
- Q:How do you use double-sided adhesive for cloth? What is its purpose? Must heating be applied to glue? Will there be residual glue after bonding? Please speak more detail.
- As for whether there will be glue residue, it depends on what kind of double-sided adhesive you use,
- Q:How do you remove the foam glue on the wooden floor?
- 4, rubber to division, for a small piece of double-sided adhesive residue, you can use the white eraser at home, directly on the floor to wipe, the same can be double-sided adhesive removal.5, toothpaste to division, you can take white toothpaste coated on double-sided adhesive, and then use a clean cloth slowly erase
- Q:There are several kinds of tape knowledge
- According to the scope of application division can be divided into:Warning tape, carpet tape, electrical tape, protective film tape, winding tape,Sealing tape, die cutting adhesive tape, etc..4, according to market penetration rate can be divided into: ordinary adhesive tape, special adhesive tape.5, according to the application of environmental temperature division can be divided into: low temperature tape, room temperature tape, high temperature adhesive tape.
- Q:What are the general use of double-sided tape?
- They are widely used in leather, nameplate, stationery, electronics, automobile decoration, shoes, paper making, handicrafts, paste, positioning and so on. Hot melt double-sided adhesive mainly used in stickers, stationery, office and so on.
- Q:Construction method of butyl adhesive tape
- Single sided non-woven fabric, Yongxing adhesive tape, method of use(1) after the lighting board is installed on the frame, the lighting board seam will be bound and the parts of the adhesive tape will be wiped clean.(2) open the adhesive tape in the joint of the lighting board, then tear off the insulating paper on the edge of the compacted adhesive tape, and then install the aluminum alloy board on the lighting board. Secure with a waterproof screw.(3) on the lighting board and the wall joint, use one side aluminum foil adhesive tape to bond directly. 1, construction requirements(1) the performance indexes of tapes should be read carefully before construction so as to be suitable for the environmental temperature and humidity during construction.(2) according to different waterproofing membrane, different construction methods, choose different types, specifications of different sizes of Yongxing tape.(3) before construction, the quality of the aforesaid project shall be checked and accepted, and the waterproof layer shall be constructed after qualification.(4) according to the requirements of the engineering design and construction waterproofing, waterproofing and leveling layer bonded firmly, do not allow Konggu phenomenon, after the construction of waterproof layer should be protected.(5) the use of Yongxing parapet should pay attention to the tape, brick or concrete surface bonding parts of the firm and smooth surface, such as the poor, the application of cement paste for repairing yarn
- Q:With the two convex lens, a cylinder, a ruler, transparent tape, double-sided tape do magnifier
- 5. Ask a friend to measure the distance between two magnifying glasses and record them.The opening is about 2.5 cm near the front end 6, a cylinder in the local shear groove. Do not shear the reels. The slot should accommodate the larger magnifying glass.7, the paper then cut a groove between the groove and the first groove distance equal to the distance recorded in your friends. This is where the second magnifying glass is placed.8. Place two magnifying glasses on the appropriate slot (big ones in front, small ones at the back) and fix them with tape.
- Q:What is sponge double face glue?
- A material used in building construction to facilitate temporary fixation of objects
- Q:How to fill in the property when releasing adhesive tape?
- Hello! At present, there are many kinds of adhesive tape on the market (such as sealing tape, printing adhesive tape, double sided adhesive tape and stationery tape,
- Q:How do you clean the tape on top of your notebook?
- The double adhesive tape stuck on the notebook is difficult to remove, but you can use the following way to remove, welcome to consult Dongguan Electronics Co., Ltd.A: you can use the dry cloth stick alcohol, in the adhesive tape with double-sided wipe slowly
- Q:What's the effect of double-sided adhesive?
- According to the plastic can be divided into solvent adhesive tape (oily glue), emulsion
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Double Sided Tissue Tape With Hotmelt Based Adhesive
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords