Q:Im trying to make a small hole in a metal door to screw on a door sweep I have no drill what can i do to make

Maybe you could borrow a drill from someone...there's really no other way to do it. You could try hammering in a small nail and then pulling it out and putting in the screw, but you'd probably strip the screw if the door was made of stronger metal than the door. Drills aren't that expensive either, and if you bought one then you'd have it the next time you needed it.

Q:How do you cut off about one inch of the bottom of a metal door? What kind of tool do you need?

try a metal file and then sand the bottom smooth

Q:Titanium-magnesium alloy door and aluminum-plastic door is the same?

Titanium magnesium alloy door with high strength and small density, good mechanical properties, toughness and corrosion resistance is very good. In addition: titanium alloy process performance is poor, cutting difficult. In the hot work, it is very easy to absorb impurities such as nitrogen and nitrogen. There are poor wear resistance, the production process is complex. Its main ingredient is titanium, but the content of magnesium is also a lot. Titanium-magnesium alloy profiles and glass models are the north and south of the points: titanium magnesium alloy door to aluminum thick, style as the main characteristics of calm, the most representative is the grid style, and the grid is the most characteristic of the Tang Grid, the iconic manufacturers are Changchun ocean. South to aluminum modeling and diverse styles of living as the main features, the most representative is the flower style, more distinctive style of flowers, ice, shallow carving, crystal shell, etc., of which the iconic manufacturers are the new standard in Guangzhou Door industry. Aluminum plastic doors and windows, in fact, is a modern door and window products and said. As the name suggests, can be understood as aluminum doors and windows and U-PVC steel doors and windows, can also be understood as aluminum composite doors and windows, that is, broken aluminum doors and windows, aluminum doors and windows and other high-end energy-saving products. Plastic doors and windows are made of polychlorinated olefins (UPVC) as the main raw material, plus a certain proportion of stabilizers, colorants, fillers, UV absorbers, etc., by extrusion, and then by cutting, welding or screw Way to make doors and windows frame fan, equipped with sealing tape, tops, hardware, etc., at the same time to enhance the rigidity of the profile, more than a certain length of the cavity needs to fill the steel lining (stiffeners), so made the portal Windows, called steel doors and windows.

Q:Aluminum alloy doors and windows material thickness how to choose

Yi shield doors and windows to remind you, the thickness of the material generally refers to the wall thickness of the material, aluminum doors and windows of the national standard is 1.4mm or more, but the actual life, 1.0mm is to meet the needs of the owners, the choice of doors and windows material thickness is the most important Look at the needs of the owners themselves. If you need to sound insulation good, naturally choose some thick thickness will be better.

Q:Glass and steel doors and windows and aluminum doors and windows What is the difference

FRP (also known as GRP, fiber reinforced plastic, generally refers to the use of glass fiber reinforced unsaturated polyester, epoxy resin and phenolic resin matrix. Reinforced plastic with fiberglass or its products as reinforcing material, called fiberglass reinforced plastic, or titled fiberglass. As a result of the use of different varieties of resin, so there are polyester glass fiber reinforced plastic, epoxy glass fiber reinforced plastic, phenolic glass steel said. Light and hard, non-conductive, high mechanical strength, less recycling, corrosion resistance. Aluminum is white that is aluminum upgrade products. Aluminum itself is softer and lack of rigidity. The aluminum alloy by adding magnesium and other chemical elements in the magnesium, the hardness, steel and molding have changed. We all know the same cost, plastic steel than the bridge aluminum insulation is good, but its steel and weather resistance is worse, the current market is a glass steel insulation doors and windows, aluminum alloy than antioxidant, anti-corrosion, temperature change. And FRP itself has the same plastic insulation properties, glass and steel doors and windows when the processing is not like aluminum alloy angle, not like steel using hot welding process. FRP mainly used screw. From the above information on the point of view, FRP combines the advantages of steel and aluminum alloy, but also ruled out the shortcomings of the two can be said to be very good new doors and windows, but as a new door and window, it needs to accept the need to market Use to find the lack of current glass and steel doors and windows may become the mainstream of the future doors and windows. Of course there are a lot of places where we do not know where it is unclear or shortcomings. Such as FRP almost can not be recycled, this is a big trouble. Hope this helps you.

Q:Self-employed, small facade. The Production of aluminum doors and windows, Need a production license? ////

According to the "building outside the window product production license implementation of fine" requirement: Where the building window products are produced, sold or used in business activities within the territory of the People 's Republic of China, the present Regulations shall apply. Any enterprise that does not obtain a production license shall not produce the building window products. No unit or individual may sell or use the building window products that have not obtained the production license in the business activities. ?The rules apply to the construction of the window products to implement the production license management of the building outside the window: aluminum alloy construction profiles, window frames with unplasticized PVC profiles, color coated steel and steel profiles made of building windows The Building windows of the product unit: aluminum windows, plastic windows, color coated steel window window. ?The State Administration of Quality Supervision, Inspection and Quarantine (hereinafter referred to as the General Administration of Quality Supervision, Inspection and Quarantine) is responsible for the unified management of the production license of the building window products. Unified release of the provincial quality and Technical Supervision issued by the product catalog and timely adjustment, unified development and promulgation of product implementation rules, unified provisions of the certificate style, and to take occasional inspection of the provincial quality and technical supervision of the issuing work Quality supervision and inspection. ???????According to regulations, any units and individuals operating outside the window products must obtain a production license, otherwise they shall not produce or sell. Therefore, self-employed also need to apply for production license.

Q:Aluminum alloy doors and windows have what model

Hello, there are many models, basically every plant is not the same

Q:I am trying to replace my bedroom doors that have a metal door frame. It doesnt look like it is screwed in. I am not sure how to go about this. Any help would be appreciated.

It usually has screws. If there is no piece on the inside that prys off, exposing screws from the frame into the wall, then there may be screws through a flange under the trim. You need to take the trim off anyway, so take it off and look. If there are no exposed screws, the wall covering (typically sheetrock) may be covering them, cut the sheetrock back a little, but not beyond what the trim covers. As long as you can see metal heading into the wall ,there is a point of attachment someplace under there. If you are not trying to salvage the frame, just get a sawzall and some good metal cutting blades and cut between the wall and the frame.

Q:Paint door, aluminum door, stainless steel door

GB standard anti-theft door steel plate thickness of not less than 1 cm, the thickness of the door a little higher strength. Of course 1.2cm thick steel plate is good. Good things certainly more expensive, according to their own needs to choose. Wood-based board thing is not incredibly, 1 cm thick door is not stop the thief, after all, your home is not a bunker, do not need to resist the fire bombing.

Q:Single door Double door with vision panels for Clean Room Application in Pharmaceutical Industry.

Good CLEAN ROOMS DOORS for Pharmaceutical Industry, Single door Double door with vision panel are made by Sheth Fabricators in Mumbai. They are called like Clean rooms door, contamination control doors, hospital doors, laboratory doors, food safe doors, hygienic doors, hygiene doors, 316 SS, 304 SS, hospital door, laboratory door, hygienic door etc.