Product Description:
Control panel options:
1. Manual starting system with low oil pressure, high water temperature, over speed,
emergency stop and re-install protections.
2. Automatic starting system with LED display and auto-connect to Main power after outage.
3. Parallel control system
4. Remote control, measure, communication control system.
Test Before Shipment
1. Each Generator Set shall be put into Testing more than 4 hours totally, tested on idleload, fully
load and 10% overload.
2. Noise level shall be tested.
3. All of the meters on the control panel shall be tested.
4.The appearance of the Set and the label, nameplate shall be tested. "Voltage available:
50Hz: 380-400-415V/ 220-230-240V; 60Hz: 220-380-416-440-480V/ 110-208-220- 240V.
Any special voltage is also available as client's request.
Packing & Warranty
Packing: Wooden, Plywood or Metal Case.
Delivery Time: Less than 15 working days after receiving prepayment.
Warranty:
One year or 1, 000 hours from the date of shipment
(15 Months or 1, 200 hours for Alternator Part).
Payment Terms:
L/C & T/T ( 30% deposit and 70% balance before delivery)
- Q:What are the two major engines of the engine, the four major systems?
- (1) crank crank the engine realizes the operating cycle, complete the energy conversion the main motion parts. It consists of the body, the piston linkage and the crank flywheel group. During the power stroke of the piston the gas pressure in a cylinder linear motion and rotary motion into the crankshaft through the connecting rod, and the crankshaft outputpower. In the intake, compression and exhaust stroke, flywheel energy release and the rotary movement of the crankshaft into linear movement of the piston.
- Q:What is the difference between the new Santana CKA and the CPD engine?
- One of the new car flow line smooth and structured, simple design style, but also more engaging.
- Q:CFM international engine company profiles
- In 1969 the French government for the international civil aviation market situation puts forward a research thrust 10t turbofan engine project, the French SNECMA company through the analysis and investigation, by the end of 1971 the United States GE company as a partner in the United States F101 machine core military turbofan engine based on the development of aircraft in 80s to meet the low fuel consumption, low noise and low pollution requirements the engine.1971 in November the two companies decided to jointly develop the 10000daN level high bypassratio engine.1
- Q:What are the dangers of overheating the engine?
- Due to overheating caused by the crankshaft side rod reducer bearing seizure, piston ring fracture, cylinder, cylinder hold, shorten the service life of the engine, endanger motorists driving safety.
- Q:What is the difference between a piston engine and a jet engine?
- The jet engine is usually composed of a turbine tailpipes of the combustion chamber compressor, the fuel is fired and the high temperature and high pressure gas is driven to rotate the turbine, and the turbine and the compressor are consolidated so that the compressor rotates the air into the engine and pressurizes several times
- Q:What are the power performance indicators of the engine?
- 3, crankshaft speed: refers to the engine crankshaft revolutions per minute, usually expressed in N, unit r/min. The main indexes of engine performance are speed, power, torque, fuel consumption and so on. These indicators are usually marked in the instructions of the car or engine. In addition, there are some relative indicators, such as power up, lift torque, lift mass, specific mass, and so on, which can be compared among different engines.
- Q:The earliest engine
- Now introduce a car engine: variable valve timing technology, double overhead camshaft technology, in-cylinder direct injection technology, VCM cylinder management technology, turbocharging technology, and so have been widely used;
- Q:What does EFI mean on the engine?
- VVTI, VCTE, CVVT, DCCT, on its practical principle, is the variable valve timing system, is a control valve through the opening and closing process and opening and closing time to achieve the improvement of intake air quality and improve the combustion efficiency of the technology
- Q:What about SQR484F?
- Because it is an early production of independent research and development model, more attention to reliability and peace of nature, so in the power adjustment aspect is more conservative, at present the engine is already very mature, is Chery's flagship 2.0L engine.
- Q:What are the models of oil? What type of engine oil is used with turbocharged engines?
- Oil models are divided into three categories: summer, winter and seasons oil
1. Manufacturer Overview |
| Location |
|
| Year Established |
|
| Annual Output Value |
|
| Main Markets |
|
| Company Certifications |
|
2. Manufacturer Certificates |
| a) Certification Name |
|
| Range |
|
| Reference |
|
| Validity Period |
|
3. Manufacturer Capability |
| a)Trade Capacity |
|
| Nearest Port |
|
| Export Percentage |
|
| No.of Employees in Trade Department |
|
| Language Spoken: |
|
| b)Factory Information |
|
| Factory Size: |
|
| No. of Production Lines |
|
| Contract Manufacturing |
|
| Product Price Range |
|
