concrete transportation GD08FD,Rotational speed: 0～14r/min

Inquire Now

Quality Product

Order On-line Tracking

Timely Delivery

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Rotational speed: 0～14r/min
Feed rate: ≥3m³/min
Rest rate: ＜0.7％

Type	Model	Unit	GD08FD
Performance of mixing drum	Geometric volume	m³	14.3
	Mixing volume	m³	8
	Maximum diameter of drum body	mm	2280
	Length of mixing drum	mm	4624
	Angle of inclination	°	13
	Rotating speed	r/min	0～14
	Charge speed	m³/min	≥3
	Discharge speed	m³/min	≥2
	Residue ratio of discharge	%	＜0.7
	Range of slump	cm	5～21
Hydraulic system	Oil pump		international brand
	Motor		international brand
	Reduction gears		international brand
	Hydraulic circuit		Closed type
Water supply	water tank capacity	L	450
Water supply	Way of water supply		Pneumatic
Complete machine	Brand of chassis		Ford
	Chassis model		Cargo 2629
	Type of driving		Left-hand drive
	Curb weight	kg
	maximum gross weight	kg	2300
	Type of drive		6×4
	Wheel base	mm	3440+1360
	Tyre		12.00R20
	Means of power takeoff		Power takeoff by flywheel
	Notice model
	External dimensions	(length×width×height)mm	8680×2455×3920
Engine	Model		Cummins ISB6.7
	Rated power	Kw/r/min	213
	Displacement	L	6.693
	Emission standard		Euro V

Send a message to us:

Email:

Telephone:

Qty Required:

Company:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Does anyone know a website where to buy tortilla making machinery?: This okorder.com/

Q:How long is MOS school for a mechanic in the Marines? Heavy machinery?: what is the MOS designation? i have a current pdf of MOS schools/stationed bases.

Q:Characterize Pete Bancini with regards to the theme of Machinery.?: Bancini worked on the rail road for a long time he sees things in the world like a machine.

Q:Stone cutting machinery: Look for concrete saws. They cut rock as well. There's a wide variety available. The link below is one place to start.

Q:Why did Henry David Thoreau use the metaphor of machinery in On the Duty of Civil Disobedience?: I think Thoreau, who espoused the need for simplicity, was trying to show that an industrialized society enslaves man more than it frees man. Machines that are supposed to make our lives simpler can, in actuality, make it more complicated. For instance: cars. Cars are supposed to make getting from point A to point B easier. However, with the advent of the automobile society, point B can now be much farther away from point A than in the past. However, if your car breaks down, that is a problem in itself, because you must now repair the machine that is supposed to make life easier. On top of this, point B is now farther away from point A than in the past when there were no cars; so now point B is harder to get to because the machine that made it simpler to get to point B is out of service. Therefore, in my opinion, Thoreau used the metaphor of machinery to show how industrialization further complicates and worsens the quality of life, as opposed to making it easier.

Q:Christians : Would you Encourage a Manual Reaper with your extra or surplus Machinery?: This is another wantabee preacher. He's working up himself to steal from the weaker minds.

Q:can nebody tell me where can i get wood wool machinery?: May know were an old one is. Are you in US?

Q:How do you make drum shells by hand without using heavy machinery?: do nothing

Q:AC/DC MACHINERY HELP??: The brake horsepower is the power delivered to the load by the engine under specified operating conditions. The engine delivers 30 X 745.7 = 22371 watts to the generator. A machine described as a 20 kW, 200 V shunt generator would be assumed to be a DC generator with a nominal rating of 20 kW at 200 V dc. It would be capable or delivering 20 kW, but the actual delivered power is not stated. You could assume that the generator is operating at full load. If that is the case, the total losses, copper, iron and friction would then be 22371 - 20000 = 2371 watts. If you have been given that the iron and friction losses are 1039 watts, the copper losses must be 2371 - 1039 = 1331 watts. There is no information given in the problem, such as armature and field resistance, that could be used to calculate the copper losses. If you had that information, you could calculate that the copper losses are 1331 watts and from that calculate the iron and friction losses. Are you sure that you are not supposed use machine specifications provided in another problem?

Q:Why do some pieces of machinery need to be so loud?: accoustics is a specialize field in mechanical engineering. u can start thinking about it......... all mechaneries have to be as quiet as possible and submarine has to be totally silent to avoid detection. machineries are noisey because human has no way of finding a way to reduce their nosie yet.....

3. Manufacturer Capability
a)Trade Capacity
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range