Loop Tie Wire Type Binding Wire Function Black or Galvanized
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 m.t.
- Supply Capability:
- 5000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Item specifice
1.Structure of Loop Tie Wire Descrildn
Loop Tie Wire is also known as tie wire or binding wire. It is easy to operate, therefore it's widely uses in binding of different materials, especially for daily use. The main materials of loop tie wires are galvanized iron wire, black annealed iron wire, PVC-coated iron wire and copper wire.
Material & Application: Made by good quality low carton steel, used in construction or as binding materials or others way.
Wire gauge from BWG16 to BWG20
Remark: The others could according to customers request to make.
Lengths:3" up to 44"
Finishes: Black Annealed. Galvanized Annealed, Coppered, PVC coated, Stainless steel
Packaging:5,000/roll 4,000/roll 2,500/roll ,2000/roll,1,000/roll
2.Main Features of Loop Tie Wire
Loop Tie Wire offers a great protection against corrosion and oxidation caused by the atmosphere. Its high resistance allows greater spacing between the fencing posts.It is by twisting and weaving,firm and beautiful.
3.Loop Tie Wire Images
4. Loop Tie Wire Specification
diameter | length |
16GA | 4" |
16GA | 5" |
16GA | 6" |
16GA | 7" |
16GA | 8" |
17GA | 4" |
17GA | 5" |
17GA | 6" |
17GA | 7" |
17GA | 8" |
18GA | 4" |
18GA | 5" |
5.FAQ
Q:How do you ship the finished Loop Tie Wire?
A:Usually by sea.
Q:Are you a manufacturer?
A: Yes,we have specialized in this field for more than 7 years experience.
Q:How many days will the samples be finished?And how about the mass production?
A:Generally,3-5 days for samples of galvanized iron wire making, the time of mass production depends on the quantity,18-20 days for 3 5 containers. please noticed that we can offer you free sample to check the quality.
- Q:On the large harness that goes to the radio, I can't figure out what 5 of the wires are for. on the harness they are b3 (light tan/white), b4 (gray), b5 (black), a6 (pink), and a7 (blue).
- 2005 Chevrolet Impala Car Stereo Radio Wiring Diagram Car Radio Constant 12v+ Wire: Orange Car Radio Switched 12v+ Wire: Yellow Car Radio Ground Wire: Black Car Radio Illumination Wire: Gray Car Stereo Dimmer Wire: N/A Car Stereo Antenna Trigger: White Car Stereo Amp Trigger Wire: N/A Car Stereo Amplifier Location: N/A Front Speakers Size: N/A Front Speakers Location: N/A Left Front Speaker Positive Wire (+): Tan Left Front Speaker Negative Wire (-): Gray Right Front Speaker Positive Wire (+): Light Green Right Front Speaker Negative Wire (-): Dark Green Rear Speakers Size: N/A Rear Speakers Location: N/A Left Rear Speaker Positive Wire (+): Brown Left Rear Speaker Negative Wire (-): Yellow Right Rear Speaker Positive Wire (+): Dark Blue
- Q:coil wiring diagram
- The two small wires are positive and negative. Most are color coded and if it's a OEM part, the negative will be the same color as the group of smaller wires connected to the negative battery cable. Each manufacturer uses different color codes and for instance, Kawasaki uses black with yellow stripe. The other wire will go to the positive side. If the coil doesn't have wire coming out if it, it may have a + or - sign by the terminals. In actuality, it doesn't really matter which way you hook it up because a coil doesn't really care which way the electricity travels. It's the collapsing magnetic field that creates the spark and not the direction or movement of electricity.
- Q:Ok so I bought a blower and barrow at the junk store... Figured I could use a v-belt to drive it with this old motor I have... Homemade dust collector!!! Anyhow I have no Idea how to wire it up... I know it probably needs a capacitor but thats about it... It's an Emerson... Has orange, blue, brown, white, and black. Any Ideas would be great! On the sticker it list three different speeds (rpms) So i'm guessing I don't need all the wires and some are just quot;taps.quot;
- i think of you have enormously plenty responded your individual questions. The drain is clogged as they generally get with out each year maintenance or a minimum of two times a summer season pouring bleach in the path of the line. And besides, it has probable broken the blower motor. One issues for specific although, by no ability attempt and repair the unit or look at it with out first turning the capacity off to the kit which it variety of feels which you ignored to do. I additionally undertaking to assert that somebody has at one time replaced that blower motor because of the fact your description of the wires might point out that it wasnt production facility set up anymore.however the provider tech which you will might desire to call and time table an appointment with would be waiting to repair and replace mandatory aspects. go away something as much as the pros
- Q:I spliced the stereo wires to the adapter to plug into my car. there's 2 extra orange wires in the adapter. There orange it says there for illumination and the dimmer. What should I do with them? Did I get the wrong one?
- If the vehicle/truck grew to become into made until now 1968 i'm able to warm cord it andchronic it.After 1968 i'm able to attempt initiate the engines yet i cannotchronic it now devoid of disassembling the steerage wheel calum.somebody advised me,then your no longer e very stable mechanic.I replayed no that advise i'm no longer a vehicle thief.
- Q:I made a kill switch for my car. All I need to do now is cut the wire that goes into my engine control module and join it with the switch I made. Would it be fine if I just use wire nuts or some sort of tape to join the wires instead of soldering? The instructions say quot;Step 6: Attach the killswitch wires one to each side of the wire you just cut. Step 7: Tape up all new connection.quot;It says to tape the new connections, but should I use exactly?
- Solderless crimp-on butt connectors. $3.00 at Home Depot or Autozone.
- Q:I don't like wiring nuts because I always feel like it's not a solid connection, like it could come out.
- This Site Might Help You. RE: Is there an alternative to wiring nuts? I don't like wiring nuts because I always feel like it's not a solid connection, like it could come out.
- Q:Phone wire outside was old is anybody done that, do it your self put a new wire on?, Just curious to know..
- Outside wire would feed back to the telephone central office and will either be aerial wire, connected to poles, or buried. Either way it is not feasible for someone other than the telephone company to replace.
- Q:I bought a single pole dimmer switch to install in my dining room and when I took the old switch out nothing looked right. There are two wires which were joined together by another single wire which was attached to the top screw. There was another single wire (I believe the ground wire) attached to the bottom screw. I disconnected the first two wires and attached them separately to the black wires on the dimmer and attached the ground wires together. It didn't work. I've tired several different times with no luck. I put the wires back the way they were and attached them to the old switch and they no longer work ether. Help! How can I fix this problem? The old wires appear to be a very thick copper covered in black plastic and cloth.....
- How To Install A Dimmer
- Q:installing whelen car strobe lights.the directions say to wire the power to the battery with wire that can hold 125% of the power
- ask the professional
- Q:tryin to move dryer approx 8 more feet but existing wire not long enough have 12/2 wire can that be used to run 220 dryer
- 12 wire is not heavy enough to pull a 220 dryer under any circumstances, and is against ANY code in America; and is a severe fire hazard. Besides, you need to have three wires - 10/3 0r 8/3 wire, anyway, so you would have a ground. Papaw
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Loop Tie Wire Type Binding Wire Function Black or Galvanized
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 m.t.
- Supply Capability:
- 5000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords