16ton Pneumatic Tyre Static Road Roller
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 PCS
- Supply Capability:
- 1000 PCS/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
16ton Pneumatic Tyre Static Road Roller
Basic Info.
Model NO.:XP163
Type:Road Roller
Working Method:Vibration
Axle:Uniaxial Monowheel
Application:XCMG XP163 Pneumatic Tyre Hydraulic Road Roller
Operating Weigt:16000kg
Drum Width:2055mm
Engine Model:Yc4a125z
Engine Type:Water Cooling,Pressurizing
Tyre Amount:Front 4 Rear 5
Rated Power:92kw @2200 R/Min
Engine Oil Consumption:230g.Km/H
Hydraulic Oil Tank Capacity:60L
Diesel Oil Tank Capacity:130L
Export Markets:Global
Additional Info.
Trademark:FOTMA
Packing:Export Packing
Standard:International
Origin:China
HS Code:84294011
Production Capacity:10000 PCS/Year
Product Description
16T XCMG Road Roller XP163
Rated Power: 92KW
Engine Model: YC4A125Z
Operating Mass: 16000kg
Compaction width: 2055mm
Min. Turning radius: 7230mm
Model | Unit | XP163 |
---|---|---|
Min. working weight | kg | 11100 |
Max. working weight | kg | 16000 |
Ground pressure | kPa | 200-400 |
Travel speed | km/h | |
Speed I | 4.2 | |
Speed II | 8.2 | |
Speed III | 17.4 | |
Reverse speed I | 4.17 | |
Reverse speed II | 8.2 | |
Theoretical gradeability | % | 20 |
Min. external turning radius | mm | 7230 |
Min. ground clearance | mm | 250 |
Compaction width | mm | 2055 |
Roller overlap amount | mm | 30 |
Tyre specification | 9.00-20-12PR | |
Amount | Front 4 Rear 5 | |
Engine model | YC4A125Z | |
Type | Water cooling, pressurizing | |
Rated power | kw @2200 r/min | 92 |
Engine oil consumption | g.kw/h | <230 |
Hydraulic oil tank capacity | L | 60 |
Diesel oil tank capacity | L | 130 |
Overall length | mm | 4715 |
Overall width | mm | 2055 |
Overall height | mm | 3258 |
- Q:The road from top to bottom, followed by 500 thick gravel, 300 thick cement stabilized macadam, 100 thick asphalt. While the gravel bottom elevation and elevation is very close to the top of the rain water, how to prevent the roller crushing rain water pipes?
- There is no good way, the bottom of the 500 thick gravel can only be compacted with light rolling equipment, such as frog ram, impact rammer, etc., according to specifications above the pipe top 50 centimeters to use roller mill rolling.
- Q:When using 20T heavy vibratory roller, what is the backfill thickness per layer?
- 2, subgrade backfill using heavy roller, in order to ensure backfill quality. The construction of subgrade soil subgrade must be layered backfilling, each layer backfilling thickness is less than 30cm, roller with 18-20T times the number of not less than four times, with cutting ring check its density to meet the design requirements must be.3, after the roadbed forming, should be central line, elevation, vertical and horizontal gradient test, qualified immediately after maintenance, after the expiration of the maintenance report submitted to the quality inspection department for acceptance testing.
- Q:How do the rollers see dual vibration, single vibration, double drive, single drive, double steel single steel?
- Double steel is a finger press. It has two front and rear steel wheels. The single steel refers to the front of the steel wheel, and the back is the rubber wheel. Steel wheels are mainly pressure bed, and some are asphalt. Some are front and rear rubber wheels, which can only be used to press asphalt.Double drive means that the front and rear steel wheels (or rubber wheels) are provided with drive motors on the side, so that the front and rear two motors drive the wheels to roll.
- Q:Introduction of tyre roller
- If the change of inflation pressure can change the ground pressure, the range of pressure regulation is 0.11 ~ 1.05 mpa. The tire roller adopts hydraulic, hydraulic or mechanical transmission system, single shaft or full axle drive, wide base tire, articulated frame structure, three point support.
- Q:Why is the roller driving force facing the paver when the asphalt is laid and rolled?
- The exact requirements should be paved and rolled according to the direction of the road.
- Q:The front wheel diameter of the roller is 1.6m, and the width is 2m. What is the area of the roller that rotates for one week? M2
- Solution: it is known that the front diameter of the roller is 1.6 meters and the width is 2 meters,The front wheel is rotated for one week, the area of the roller = the front wheel's perimeter * width=3.14 * front wheel diameter * width=3.14 * 1.6 * 2=10.048 square metersA: the front wheel is rotated for one week. The area of the roller is 10.048 square meters.
- Q:OGFC why the use of less than 12 tons of steel tube roller
- Because it should be careful with vibration rolling and roller roller compaction, and pay attention to avoid excessive grinding. At the beginning of rolling, the opportunity of pressing the road is closely followed, and the paver should not be too spaced. After the paving, the initial degree of compaction is great. It has been proved by practice that the direct rolling process can be directly applied to the complex pressure process without serious deterioration, otherwise, it should be rolled according to the requirements of the SMA pavement.
- Q:What is the concept of the static line pressure of roller?
- I can give you a method for calculating the line pressure: the line pressure = the weight of the steel wheel, W (kg) divided by the width of the steel wheel, L (CM)What is line pressure?. This is where the pressure is concentrated in the narrow part of the contact surface. In fact, the state of the line.
- Q:It is feasible to build a 2 story building. The foundation is compacted by roller
- Building foundation on the one hand is to bear the weight of the house, on the other hand, it is also necessary to ensure the uniform settlement of the house, otherwise the house will crack. No foundation, the house can not be built, there is no construction master dare to build.
- Q:What is the cause of soil cracking when subgrade is pressed by subgrade?
- When the moisture content of backfill material is too large, cracking occurs in the course of pressing, and it will become loess when it is serious. The optimum moisture content of backfill is between 9% and 11%.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
16ton Pneumatic Tyre Static Road Roller
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 PCS
- Supply Capability:
- 1000 PCS/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords