PVC Insulated Electrical Wires 600v Cable packed with plastic Reel UL1015 12AWB Enamel Copper Wire
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 m
- Supply Capability:
- 50000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Applicant
1.) Household,indoor/outdoor,buliding wiring and associated devices ,to supply the power for lights fittings,switches,meters,plug point,air conditioners,refrigerators,water
pump,water heater,AC motor and etc.
2.) For decoration lights.
3.) Short span electricity transmission.
4.) For electrical appliance,electronic,instrument and telecom devices.
Specification
Description:
- Model No. : AC10WE25
- Size : #12AWG 3.3mm²/65" 105°c / 1 core
- Tinned or bare stranded 9-28AWG copper or tinned copper
- PVC insulated
- Temperature: 105 °c ; Voltage: 600Vac
- Use the standard thickness, easy stripping and cutting easy
- with anti-acid. oil resistance. moisture. mildew and other characteristics
- Passes UL VW-1 & CSA FT1 vertical flame test
- OS-1 is available
1 | Model | AC10WE25 | ||
2 | Standard | UL/CSA : 105°c, 600 Vac, 750 Vdc, 30# ~ 2,000 kcMil | ||
3 | Construction & Dimension | |||
Item | Specification | |||
Conductor | Size | 3.3 mm² | ||
Material | Annealed Bare Copper | |||
Insulation | Material | PVC | ||
Min. Average Thickness | 0.798mm | |||
Min. Thickness at any point | 0.815mm | |||
Diameter | 4.00±0.15 | |||
Identification | Blue, Brown, Yellow/Green | |||
Core Assembly | Core Twist | Single Core | ||
Filler | NA | |||
Assembly Pair | NA | |||
Taping | Mylar Foil | NA | ||
Shielded | A1 - Mylar Foil | NA | ||
Drain | Material | NA | ||
Construction | NA | |||
Jacket | Material | PVC | ||
Min Average Thickness | 0.90mm | |||
Min. Thickness at any point | 0.67mm | |||
Overall Diameter (Approx) | 8.5±0.20 | |||
Color | Any Color | |||
4 | Electrical & Physical Properties | |||
Item | Specification | |||
Rating Voltage | 300/500V | |||
Conductor Resistance | 13.3Ω/Km 20°c Max | |||
In case of dispute, Conductor resistance shall be the referee method | ||||
Insulation Resistance | 0.010MΩ/Km 70°c Min | |||
Dielectric Strength | AC 2.0KV/5 min No Break | |||
Insulation | Unaged | Tensile Strength | 10N/mm² | |
Elongation | 150% Min | |||
Aged | Tensile Strength | Min 10N Unaged±20%(85±2°cx240hrs) | ||
Elongation | Min 150% Unaged±20%(85±2°cx240hrs) | |||
Loss of mass Test | 2.0mg/cm² (max) | |||
Jacket | Unaged | Tensile Strength | 10N/mm² | |
Elongation | 150% Min | |||
Aged | Tensile Strength | Min 10N Unaged±20%(85±2°cx240hrs) | ||
Elongation | Min 150% Unaged±20%(85±2°cx240hrs) | |||
Loss of mass Test | 2.0mg/cm² (max) | |||
Deformation Test | 150mm, 70±2°c x 1hr≤50% | |||
Cold Bend Test | -15±2°c x 4hr No Crack | |||
Heat Shock Test | 150±2°c x 1hr No Crack |
Electric Properties | |
Item | Specification |
Specified voltage and temperature & standard | UL/CSA : 105°c, 600Vac, 750Vdc, ROHS / RECH |
Spark Test | The insulation must be withstand 5KV high-tension current |
Insulation Potengial Strength | 2000V/Min(for water's environment |
Minimum Insulation Resistance | 20°c, DC500V 15MΩ-KM Above |
Physical Properties | |||
Based on standard of flammability material testing | According for UL Subj.758 spec/According for CSA spec | ||
Before of aging test | Insulation tensile strength test kgf/mm2 | 1500 psi above | |
Insulation elongation test rate % | 100% above | ||
After of aging test | Insulation tensile remnant rate % | This amount must be above 70% after heat ageing (136°c,168hrs) | |
Insulation elogates remnant rate % | This amount must be above 65% after heat aging (136°c,168hrs) | ||
Heating Distortion Test | The insulation face must be no cracked, high temperature at 120°c for 1 hour | ||
Thermo Shock Test | The insulation face must be no cracked, high temperature at 120°c for 1 hour and bent, to withstand 1,000V for 1 Min | ||
Cold Bending Test | The insulation face must be no cracked, cooled at -40°c for 3 hour and bent to withstand 1000V for 1 Min | ||
Oil Resistance | Immersed in oil at 80°c for 4 hrs and bent to withstand 1000V for 1 Min |
- Q:I have a Samsung NC10 net book, from europe. A few days ago I forgot the power cable in another country. Can I get just any laptop power cable from a computer store, or should I get a proprietary cable? Will the quality matter?
- As long as the cable has enough power for your laptop, same watts, volts etc. It's usually on some part of the power cable, and on the bottom of your laptop or on the battery.
- Q:Included in my EVGA 8800gs box was a 6 pin to 2x 4 pin molex power cable. My current power supply already had a 6 pin power cable.My Cooler Master 500w power supply has dual rails pushing 16amp each. The requirements for the EVGA 8800gs are:Minimum of a 400 Watt power supply.(Minimum recommended power supply with +12 Volt current rating of 22 Amp Amps.)Notice the 22 amp. To supply this power, am I supposed to connect the 6 pin to 2x 4 pin molex power cable to each of the 16amp rails from my power supply therefor providing 32amp? How am I supposed to get 22amps to the card?Most all power supplies I see that are dual railed go no higher than 20amp per rail.Any thoughts? Thanks,Brad
- You can plug the standard 6 pin from your PSU the way it is and play a game and if the pc freezes or shuts off during game play then you know wehre the problem is. Do not worry about the exact specifics it wants. If you put the two 4 pin molex connections in so you can use one 6 pin then that might be more reliable as far as power flow but only do that after you try the standard 6 pin because of your limit on availible 4 pin molexs
- Q:The Leader of the band inists that all power cables connected to the amplifires be placed away from the performance area.
- To prevent injury to performers and to protect equipment from potential shorts and for fire safety.
- Q:I already have RCA cables. Just need to find a place that would sell the power cord.
- If you do get your hands on the cable- don't lose it. I wrecked my car, and when i was removing the stereo, i forgot the cable. I looked all over for the darn thing, luckily, an installer had a guy who's changer had broken, but they kept the cable for some reason.
- Q:I was walking through the bush recently and I noticed that there were cable towers separated by a valley. How would they get the cable between the towers when there is a cliff on either side?
- from what I understand, a leading cable/rope is shot across the valley if the distance is not too great. The other end of the leading cable/rope is then attached to the main power cable. The end of the leading cable is then slowly strung through the transmission mast to pull the main cable across the valley.
- Q:My acer laptop's charger wire thing has broken and i wondered if you knew if you could buy them from shops and how much they'd be?
- You okorder Unfortunately, without knowing your laptop model, I cannot give you a direct link. Best of luck.
- Q:Looks like a SATA power cable was pulled out of the hard drive without the button being pressed in and has broken tiny bits of the plastic above the Hard Drive connector that used to prevent the SATA cable from slipping out. Any suggestions on what I can do?
- Tape or a new hard drive.
- Q:Physically, I want to know what the cable looks like around the part that plugs into the laptop. I have a kink in the cable around that point, but don't know if cutting it and soldering is an option, depending on how complicated that part of the cable is. The rest of the cable is really simple (positive and negative) but does it get complex at the end?Note: I'm only talking about the cable, not the laptop jack itself. I'm talking about the end farthest away from the brick, that plugs into the laptop. I wanna know what that looks like, and how easy it would be to repair.
- If that is what you are trying to do,. just make sure you get one of the same size. =] EDIT: hour:32 minutes: OK!!! Then there should be no problem. Just cut the cable and solder it again. ie. lets say this is the cable: END__DAMAGE HERE_____Start Cut whre its damaged and solder it. You shold get somethng ike this: END___________Start =]
- Q:I need a replacement tip/end for my laptop power cable- specifically, the small cylindrical metal-and-black-plastic bit that plugs into my laptop. The cable and black box part of the cable are working fine, but the tip has bent and I need a new one. I'm having trouble finding any on OKorder or elsewhere because I don't know the technical term for the component to search for. Can anyone help?
- this is the ac power adaptor , go on the web site for your particular make of laptop check the spec for it.it should be in the part that lists accessories.
- Q:I'm trying to find out whether a laptop computer can be powered by an adapter via USB cable.Is it possible? Feasible? Available?Thanks!
- Some lower-powered devices can be powered by USB. I believe a laptop would draw too much amperage to be powered by USB.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
PVC Insulated Electrical Wires 600v Cable packed with plastic Reel UL1015 12AWB Enamel Copper Wire
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 m
- Supply Capability:
- 50000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches