Metallic Magnesium Alloy wire AZ91 in China
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 m.t.
- Supply Capability:
- 1000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Features of Metallic Magnesium Alloy wire AZ91:
Magnesium and its alloys have good resistance to corrosion. The rate of corrosion is slow compared with rusting of mild steel in the same atmosphere. Immersion in salt water is problematic, but a great improvement in resistance to salt-water corrosion has been achieved, especially for wrought materials, by reducing some impurities, particularly nickel and copper, to very low proportions.
2.Introduction of Metallic Magnesium Alloy wire AZ91:
Magnesium alloy AZ91 is a light weight alloy with a density 2/3 of Aluminum and 1/4 of steel. The strength-to-weight ratio of the precipitation-hardened magnesium alloys is comparable with that of the strong alloys of aluminum or with the alloy steels. Magnesium alloys, however, have a lower density, stand greater column loading per unit weight and have a higher specific modulus.
3.Image of Metallic Magnesium Alloy wire AZ91:
4.Technical parameters: of Metallic Magnesium Alloy wire AZ91:
Alloy | Tensile strength | Yield strength | Elastic module | Elong- ation | Hard-ness | Thermal Expansion Coefficient | Thermal Conductivity | Density |
AZ91 | 240-250 | 160 | 45 | 3-7% | 63 | 26 | 72.7 | 1.81 g/CM3 |
5.FAQ
We have organized several common questions for our clients，may help you sincerely：
①How about your Warranty？
Warranty: 1-Year for the whole light. Warranty is based on correct storage, installation, using and maintenanc
②How to guarantee the quality of the products？
We have established the international advanced quality management system，every link from raw material to final product we have strict quality test；We resolutely put an end to unqualified products flowing into the market. At the same time, we will provide necessary follow-up service assurance.
③How long can we receive the product after purchase?
In the purchase of product within three working days, We will arrange the factory delivery as soon as possible. The pecific time of receiving is related to the state and position of customers.Commonly 7 to 10 working days can be served.
- Q:As in quot;I saw this pop up over the wireor quot;it came across the wire from Livingstonquot;.
- Wire means line, line of communication between two persons. In this case, a wire is telegram. A telegram is the ancestor of the mail.
- Q:The wire is size 10AWG and will be to install a small fluorescent light in a closet. It is coming off of a typical electric outlet. I know someone who is witing it with commercial wire and I think it may be dangerous. Is it?
- If wired properly, it would be much less dangerous than if wired with 16 or 18 gauge wire. The bigger the diameter of the wire, the more less the wire heats up and the less the chance of the wire overheating.
- Q:The new light has 1 live, 1 neutral 1 earth wire, do i remove the earth connect the reds if so what about the 2 blacks?
- There should be black and white wires in the ceiling. Black is hot, white is neutral. If there is no ground wire, that's OK. You just wouldn't connect the ground wire anywhere.
- Q:One wire has part of the plastic coating on the end, the other wire does not.
- the lead is the wires showing. lead wire can also mean attaching a wire and feed it through a wall attach other end to the wire and pull it through. Now if you need both ends to have wire showing take a utility knife firmly place wire on block of wood and lightly cut through the caseing. thats the thick wire that en cases the other wires and peal back and then cut it off. then carefully hold blade of utility knife and wire aganst your thumb on a 45 degrees away from you and pull that will strip the plastic off the wires hope that answers your question dave
- Q:ok so i have a power acoustik ov2-2200 amp right now and all my wires are working fine with this amp....i am going to buy a lanzar MXA282 which is more wattage (RMS)Do i need to get any new wires to hook this amp up? like the power ground or remote wires? thx... sorry for my ignorance :/
- What size wire do you have now? You will most likely have to upgrade your power wire with that new amp. It is rated at 2000w RMS of total output so that would mean you would need a 1/0 gauge wire. All you need to upgrade is the power wire and the ground wire. The remote wire or RCA won't need to be upgraded. You will also probably need to get a new fuse box for the larger wire. If you get an amp kit you can get everything you need. Good Luck!!!
- Q:Why is thin strand wire better for powering car audio?
- It's purely for flexibility. Solid wire would be just as effective, but it's about impossible to route through a car. In response to Rolo's answer -- Skin effect is a high frequency AC phenomenon - not an issue with DC, or any frequency in the audible spectrum for that matter. High strand count in car audio wire is purely for flexibility.
- Q:hey could anyone tell me from the stock am radio in my nissan 720 what wires are the constant (memory) power and the accessory (ignition) wire so i can attach these to my new radio
- Nissan Radio Wiring
- Q:plzzz let me knw tis !! GRADE 10 PHYSICS- importance of live wires neutral wires !!!!!!!!!!
- These two wires provide the voltage difference (called potential difference) that is responsible for driving the current through an appliance. Live and neutral are terms most commonly use with mains electrical supply .. they are equivalent to + (live) and - used with batteries and other DC sources. The live wire is at the higher voltage (most dangerous) and the neutral is usually close to ground voltage (0 V). Both wires together form the complete circuit required for the current .. from the supply (through the live wire) to the appliance and back to the supply (through the neutral wire). In a mains circuit a switch is always connected into the live wire so that the high voltage is disconnected from the appliance. A switch connected in the neutral wire prevents the appliance from working (so it appears to be off) because there is a break in the circuit .. but the high voltage is still connected to the appliance which may be dangerous. For the greatest safety a switch should disconnect both live and neutral wires at the same time.
- Q:So I need to tap a few wires, and cut 1 wire and join it with another wire..What would be the best way to approach this? Here are the full instructions so you guys have an idea on what I'm trying to do.quot;On the TAN plug there is 1 ALL PINK(E7) wire you need attach the WHITE wire from your relay to that but don't cut the PINK wire just tap the WHITE into it.Next go the the GREY BCM plug there are 3 WHITE wires.
- The instructions seem pretty straight-forward. T-Taps and squeeze-connectors are basically the same thing; achieving the same results, which is to add a connection to an existing wire without interrupting the line. Just make sure you use the right size and type, meaning; don't use a low-voltage connector for a high-voltage application... You'd just fry it up. For the cut wires, I'd use crimp-connectors and some shrink-wrap. Again, using the correct connector. You can use wire-nuts, but the crimp-connectors are a more permanent fix. Good luck to ya.
- Q:I have an old sewing machine without a plug that needs wiring up but it doesn't have the modern wire colours. There's one red wire and one yellow. Does anyone know how to do this?Thanks =]
- The red one is the earth wire so should go in the right part by the fuse and the yellow one is neutrol so goes in the top middle bit :) Hope that helps
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Metallic Magnesium Alloy wire AZ91 in China
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 m.t.
- Supply Capability:
- 1000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
