Solar Module 250W with High Effiency of CNBM
- Loading Port:
- China main port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 pc
- Supply Capability:
- 20000000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Description:
CNBM Solar is a world-leading and Vertical integrated manufacturer of high-performance with Silicon,
Wafer, Cells, Modules, which convert sunlight into electricity for residential, commercial, and utility-scale
power generation.
The capacity of CNBMSolar is reach to 1GW, and make sure each year our shipment capacity is more
Than 700-800MWs, at the same time, we have set up the largest solar power station with our partner
in Ukraine.
CNBM is a Quality + Service oriented company with“Excellence at Each Step” approach, composed of
the finest components from TUV and IEC-certified partners around the world, CNBM modules consistently
undergo a variety of trials at the company’s Test & Development Centre, ensuring peak performance
capabilities. The company is committed to develop and provide the world with clean and renewable energy
to ease the energy shortages as well as human kind’s impact on the environment.
Packaging & Delivery
Packaging Detail: | Carton boxes with pallets and air bags |
Delivery Detail: | within 15 days after arrival of the 20% TT in advance |
Specifications
- Mono 250W solar panel;
-More cost effective;
-25 years guarantee;
-Full certification to selling the world.
Product Description
High efficiency mono crystalline solar panel PLM-250M-60 series
Anti-reflective coating: AR used reduce the reflectivity enhance transmittance.
Tempered Glass: Low Iron and AR coating glass increase the power output and mechanical strength of solar module. Mechanical load ≥2400Pa , transmittance ≥91.6%
EVA: Transmittance ≥91% , Adhesive Capacity >85%
Cell: 17.9% of high efficiency solar cells to sure 15.7% module efficiency
Back sheet: Using higher quality back sheet to prevent destroying and water , it’s reflectivity ≥87%, peeling strength ≥ 40N/cm.
Aluminum Frame: Anodized aluminum alloy to effectively improve the corrosion resistance and strength
Certification:
Power range:220w-270w
STC:Irradiance 1000W/m², Temperature 25°c,AM=1.5
Mechanical Characteristics
Cells size(mm) 156X156 Modules size(mm) 1650X992X46 No. of cells 60(6X10) Weight(KG) 19.6 No.of mounting holes 8 No.of waterspout 16
IMAGES:
FAQ:WHAT'S your products warranty?
No less than 90% within 10yrs and no less than 80% within 25yrs
- Q:Can solar panels be installed on swimming pool covers?
- Yes, solar panels can be installed on swimming pool covers. This allows the pool cover to generate solar energy, which can be used to heat the pool water and reduce energy costs.
- Q:I'm very interested in how solar panels work. I understand the bigger picture of how it can be used for solar heating or as a generator, but I'm lost at the smaller details. Things like: - Could my computer work on solar? It has a 900 watt power supply (this is excluding monitor/speakers) - if a panel is for example, a 60 watt panel, does this mean it will pump 60 watts a second into a battery? - Does solar heating make the water electrified?
- Build okorder /
- Q:solar panels or light parts
- They make lights that have solar panels built into them. Due to the solar cell, they can sense when it gets dark and thus switch on the light automatically. Look at Northern Tool or Harbor Freight web sites for ideas.
- Q:looking for alternative ways to save energy money and thinking about solar panels. anyone know anything about it and how expensive it is to install them?
- Consider calculating the solar costs and savings ahead of time. The price of panels have come down substantially in the last 2 months. Solar Panel lifespans have also increased. The return on investment also depends on your location in the world. Mains electricity costs seems to be going up quicker than inflation in Australia. Work out energy efficiency first as it usually cheaper than alternative energy.
- Q:I want to build a standalone wifi repeater -- powered by the sun. The problem is how much solar power and how big of a battery?net draw 4.5v @ 0.66A with loadnet draw 4.5v @ 0.60A no loadI'm assuming the best choice would be a 6v battery with a a couple diodes in series to induce ~.5v drop. Then, I need something to charge it -- I found 2v 6w solar chargers in the automotive section of Sears and 6v 2w solar chargers in the marine section of Dick's Sporting Goods.How many solar panels and what capacity batteries should I use? Is this the best method or should I use a voltage regulator and go with 2v batteries?I need this to be as cheap and simple as possible...
- You won't get very far with THAT lash-up. First of all.. WHY would you want to use diodes to drop the voltage.. they DRAW CURRENT and that is something you don't have to spare. That draw of (660 ma) comes out to just under 3 watts. You DO KNOW that you can get that 4.5 Volts by driving a NAIL into the THIRD CELL in a 6 Volt wet cell battery... right? and for what you are doing, you have more current available with a 6 volt battery than a 2 volt battery. Anyway, you could use two 6 Volt batteries and tap them at the 4.5 volt point then tie them in parallel, but you could still use the 6 volt solar panel to charge them. Trying to use an inverter is just an exercise in futility.. With TWO of the LARGEST DEEP CYCLE BATTERIES you can buy at AutoZone running in Parallel and being charged by solar panels.. if you hook a 75 watt inverter to them, they will go flat in about 4 hours of use during the night. This is not rocket science. Back when cars were changing over from 6 volts to 2 volts, I powered up more than one 6 volt car radio off a 2 volt battery... when you grow up as poor as I did.. you get inventive. I later used the same trick on the 24 volt electrical systems the Jeeps were using, to power up clandestine repeaters in places where no repeaters should have been. About 25 years ago I was living in the Denver area and built up a 0 watt 2 meter repeater on a split channel and took it up to Mt. Evans during the summer and hid it in a pile of rocks. I used tone control, so we were the only ones using it and, as I said, It was a split channel.. so it wasn't on a regular repeater channel. That thing was still running when I moved from the Denver area about 3 years later and for all I know, It's still up there on Mt. Evans (find the Brittlecone Pines and look towards that small peak about a mile to the west)
- Q:How do solar panels affect the property's energy resilience?
- Solar panels can greatly increase a property's energy resilience by generating clean and renewable electricity on-site. By harnessing the power of the sun, solar panels provide a reliable source of energy that can offset or even eliminate the need for grid-supplied electricity. This reduces dependence on fossil fuels and the vulnerability to power outages or price fluctuations. Additionally, solar panels can often store excess energy in batteries, allowing for uninterrupted power supply during emergencies or blackouts. Overall, solar panels contribute to a more resilient and self-sufficient energy system for the property.
- Q:Can solar panels be used in areas with high levels of rainfall?
- Yes, solar panels can be used in areas with high levels of rainfall. Rainfall does not necessarily affect the functioning of solar panels as they primarily rely on sunlight to generate electricity. However, it is important to ensure that the solar panels are properly installed and maintained to prevent any water damage or reduced efficiency caused by excessive rain.
- Q:Can solar panels be used in areas with high humidity?
- Yes, solar panels can be used in areas with high humidity. However, high humidity can potentially reduce their overall efficiency due to increased moisture in the air, which may affect the performance of the panels. It is important to ensure proper maintenance and cleaning of the panels to prevent any buildup of dirt or moisture, which can further affect their performance in humid conditions.
- Q:can solar power panels installed at home provide enough electricity to power house hold appliainces and heat water.
- It will take about $44,000 to put enough solar panels to provide the same amount of power that you now have coming from a 220 v 00 amp power line to your house. You should also realize that you need some method of storage for use at night or dark days. This will add another $7,000 to the cost. The only real solution for the energy problem is nuclear power.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Solar Module 250W with High Effiency of CNBM
- Loading Port:
- China main port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 pc
- Supply Capability:
- 20000000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords