Factory direct meium or low voltage armoured xlpe power cable
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m
- Supply Capability:
- 20000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
Xlpe insulated power cable
1.Best quality material
2.Armour avaliabe according to your requirement
3.xlpe cable various types
Factory direct meium or low voltage armoured xlpe power cable
0.6/1Kv~26/35Kv
PE or PVC for Sheath
Armour for option
Description of XLPE insulated power cable:
XLPE insulated power cable performs better than paper or PVC insulated cable. XLPE power cable has high electric strength, mechanical strength, high-ageing resisting, environmental stress resisting anti-chemical corrosion, and it is simple construction, using convenient and higher operating of long term temperature. It can be laid with no drop restriction.
The flame-retardant and non-flame retardant XLPE cable can be manufactured with three technologies (peroxide, silane and irradiation cross-linking). The flame-retardant cable covers all kinds of low-smoke low-halogen low-smoke halogen free, and non-smoke non-halogenated and three classes of A,B,C.
Features of xlpe insulated power cable:
1. Conductors: copper or aluminum.
2. Both armored and non-armored type power cables are available.
3. Voltage rating: 0.6/1kv 3.6/6kv 6/10kV 8.7/15kV 26/35kV all avaliable
4. PVC or PE for sheath.
5. Number of cable cores: one core(Single core),two cores(Double cores),three cores,
Four cores (Four Equal-section-area cores or three equal-section-area cores and one smaller section area neutral core),
Five cores (Five equal-area cores or three equal-section-area cores and two smaller section area neutral cores).
6. Standards: IEC 60502. IEC, BS, DIN, ASTM, CSA, NFC, AS, GOST etc. Or other special characteristics as customers request.
High quality and best price 35Kv or lower armoured xlpe power cable
Executive Standard
IEC60502-1997
Working conditions
1.For long-term running,the highest environment tempreture should not beyond 90 degree centigrade .
2.The tempreture reaches 250 degree, shot circuit occour(less than 5 seconds).
3.Tempreture for dixing cable should be more than 0 centigrade.
4.Min bending radium of cable:15 times of outer diameter(3 cores); 20 times for cable of single core .
5.A.C rated voltage U0/U 0.6/1kv~26/35kv.
Level | Code | Meaning |
Core | T(always not indicated) | Copper |
L | Alumimum | |
Insulation | YJ | XLPE insulation |
V | PVC insulation | |
Sheath | V | PVC jacket |
Y | PE or polylefin jacket | |
Armour | 2 | Steel tape |
3 | Thin round steel wire | |
4 | Thick round steel wire | |
Jacket | 2 | PVC Jacket |
3 | PE Polyolefin Jacket |
For example: YJY23 means:copper core,xlpe insulated,steel type armoured and PE jacket Power cable.
Type Application | |||||
Type | Item Description | Application | |||
Cu | Al | ||||
YJV | YJLV | XLPE-insulated cable with PVC sheath | To be laid indoors,in the tunnel,cable furrow,pipe or under soft soil.This type can not bear mechanical force or water.Single core cable is not allowed to be placed on magntic enviroment. | ||
YJY | YJLY | XLPE-insulated cable with PE sheath | |||
YJV22 | YJLV22 | XLPE-insulated cable with steel tape armor and PVC sheath | To be laid underground( deeper than 0.7m);Certain mechanical force avaliable,but no great pulling force allowed. | ||
YJV23 | YJLV23 | XLPE-insulated cable with steel tape armor and PE sheath | |||
TJV32 | YJLV32 | XLPE-insulated cable with steel tape armor and PVC sheath | To be laid underground( deeper than 0.7m);Bearable of mechanical force and pulling power. |
- Q:can you use just one power (positive) cable cut it and use the rest for your negative
- In theory, yes you can do this provided a couple things. I know it seems a simple question, and you may be fine but for safety's sake.... Power cable is usually 10 gauge braided copper. this should cover just about any amp, but as the current draw is thru the ground, this cable is usually 8 gauge and a much shorter run. If you are running a ton of power with this amp, you may want to just splurge and get yourself a run of 8 gauge ground wire, find a good solid ground and for god sake use star washers between the spade connection and the ground to ensure a good solid connection. I have seen many installs fail because of that little detail. A 10 g cable is probably good enough but to get it up to standards use an 8 g.
- Q:I recently bought a Mackie CFX20 MKII and it came with a European 2 pin power cable but I need a UK 3 pin power cable.On the plug end of the cable it says (16A 250V~) but on the connector end of the same cable it says (10A 250V~) I have no idea what cable I need to buy for this so an answer to what I need or a link to what I need would be great.Thanks.
- Be care full because a lot of european countries only have 240 volts. If you intend to use 110 make sure the mixer is switchable. If it is there will be a switch for the two different voltages. Some are made to work either way but the switch need to be in the proper position to avoid damage from either to much or not enough voltage. I work for a sound company and sometimes we get sent stuff wired for over seas. Some times it has to be exchanged because it isn't switchable. You need to contact Mackie and make sure you get the right cable. I'm sure they have a toll free number and web support. You may need to exchange the mixer.
- Q:I have digital cable through Cox. The receiver is plugged in, and the electricity is fine, but it won't turn on! Please help! I don't want to pay for repairs!
- If your not getting any power to the box no little green lite or humming noise coming from the box then its dead. your just going to need to get the box replaced you should be able to just bring your box in and trade it out to avoid a service call charge.
- Q:Forced shut down pc now it has no power just a buzzing sound when the power cable is plugged in
- That's nice. Did you want to ask a question?
- Q:So I was replacing the processor in my Laptop (Inspiron M5030) and I accidentally puled apart the cable connected to the power button. I couldn't see a clear way to connect it back, and I was wondering if there was any way I could do it myself or would I have to buy a new part?It's not the end you plug into the computer itself, it's attached to the end that's screwed into the computer.
- Hope this helps. Regards, GauravS
- Q:When I say different types, I mean different types of Xbox 360 203 watt power cables. And I know that my xbox 360 is compatible with 203 watt power cables.
- No, it really doesn't matter. All xbox 360's can use the 203W power supply. Though you can not use the 175w or 150w power supply with a 203w xenon motherboard xbox. There are 2 different types of 203w power supply, there's a 2 pin and a 3 pin. It really doesn't matter which one you get, one is grounded and one isn't.
- Q:Only the ground cable is green, the two other cables are gray and I noticed that one is with stripes the other is not... The maker is Smart Choice. - there is more clue, one cable end is coded with a letter Z , other W , than G .... the G is probably the ground ( green ) . I need to know which one will connect to the black wire and which to the white one. Please help. Thank you
- The neutral or grounded conductor will be the one with the stripe or ridge on it. This will connect to the white wire or neutral connection on the dishwasher. You can follow it down and see that it will be the wider of the two power prongs. Green or bare will be for equipment grounding and will connect to the frame of the dishwasher. Usually this is a green screw.
- Q:How to distinguish between high and low voltage power cables
- 5mm, that is 100: 76 followed by the proportion of push The height of the isosceles triangle at the time of the bend of the 200 high bridge is also suitable for the adjustment of the 90 ° bend; the use of the tool is cut off and the bending of the bridge is 90 ° Bridge elbow As for the length of the bridge to limit the restructuring of the elbow, as long as the use of junior high school learned by the simple mathematical knowledge of the calculation, any length distance can be controlled The use of mathematical methods simple calculation, a variety of angles, the length of the elbow can be made zuo
- Q:a few of the amp power cables in the recording studio got mixed around, and I'm not sure which is mine. My amp is a Fender Mustang III, (100-120V, 50/60 Hz, 310W) and I'm wondering if there is a specific power cable that I CANNOT use for the amp, like one that fits into the plug in the back but has too much voltage, and so on.
- The power cable for that amp should just be a piece of wire...nothing else. The voltage is determined by what you're plugging it in to. Any standard IEC C14 power cable will work for you. Good luck. Greetings from Austin, TX Ken
- Q:when sending off an xbox, do I include the power cables in the box?
- my boyfriend just sent his off. he included the power cables. they fixed his xbox and had it shipped back in about a week, week and a half. they did not ship back the power cable for two to three weeks AFTER they returned the actual console. so i would advise not shipping the cable!
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Factory direct meium or low voltage armoured xlpe power cable
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m
- Supply Capability:
- 20000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords