Q:LED lights string broken, how to repair?

As an emergency treatment, you can also short-circuit the open circuit of the LED lights. Used to restore normal work.

Q:The number of lights in the LED string

Different LED number of LED light band price is different, and this is also to distinguish LED lamp belt price is an important factor.

Q:Rated voltage of LED lamp string

You are the light string and see how much you a lamp, the lamp voltage for LED in 3.0-3.4V, for intermediate values of 3.2V, N=220/3.2=68.75 so many beads. In fact, we are in terms of LED is a DC device, there is no voltage rating, mainly to see his current value, the work must be steady flow. The power 0.06W LED current is 20MA, the power 0.2W LED current is 60MA, the power is 0.3W, the LED current is 100MA, the power is 1W, the high power LED current is 300-350MA, and so on in turn, ah, I=P/U

Q:What's the price of the LED light string?

Light guide plate and diffuser plateLED panel lamp manufacturer's production line price is probably between 60-80 yuan (12 pieces). The quality of the light guide plate is one of the most important factors determining the quality of the LED panel lamp. The use of high-quality light guide plate can make the finished LED panel light more uniform. No dark spots, ripples and so forth

Q:I want to do a string of LED lights that can use batteries. About 55 or so. The lights are 5MM blue. How can I work? Urgent urgent!!

If it is a general common blue LED working current is 20 mA, voltage of about 2.5V can be lit, the battery power can be used in parallel, the benefits of this connection is one of the damage does not influence the normal operation of other LED. And each LED string to a current limiting resistor, LED protection lamp, prolong life, calculation formula of the resistance for V / 0.02A=: voltage current resistance: 3V, battery powered =3 / 0.02=150. You want to supply 55 LED batteries to work together, the total current is up to 0.02x55=1.1A, i.e. 1AH (ah) capacity of the battery can work 1 hours or so.

Q:The color temperature of LED light string

Light source temperature is different, light color is also different:The color temperature is below 3300K, the color is red, and gives a warm feeling. There is a sedate atmosphere and a warm feeling.The color temperature is in the middle of 3000--6000K, and there is no obvious visual psychological effect in this hue, and there is a refreshing feeling. It is called neutral color temperatureColor temperature exceeds 6000K, light color slants blue, give a person with cool feeling, commonly referred to as cool color temperature.

Q:How do you connect the LED lights?

Connect the bottom edge of the triangle symbol to the high voltage and the sharp angle to the low voltage. The bottom edge of the next LED is connected with a sharp angle

Q:Why are there three lines for the controller of the LED light string? What are they?

The four cycles are green, blue and white, and the answer is almost the same as that on the top. But the three colors are strung together

Q:Example: if I want to do a 40 head low voltage lamp string, do 10 lights, 1 loop, transformer is 150MA, then how can I calculate the resistance? The grid is 60 Hz of China's power grid! Give a formula, and then count the examples. What is it?! Thank you

In general, LED lamps need constant current to drive, and the voltage may be adjusted according to the aging degree of the LED lamp.

Q:Performance and characteristics of LED lamp string

The 1.LED light string is led by a light emitting diode packaged in an imported chip;The design of light angle 2.LED lamp string of the larger angle angle of >120 degrees, uniform mixed color, no color;3.LED lamp string selected LED dedicated constant voltage power supply mode, circuit design for constant current circuit, the work performance is very stable, so as to ensure normal life >5 hours;