Q:How the concrete mixer works

1) self-falling blender The inner wall of a self-falling mixer has curved blades. When the cylinder is rotated around the horizontal axis, the blade constantly elevating the material to a certain height, and then the free fall, blending with each other. (2) a strong mixer A strong mixer is mainly based on the shear mechanism. In a blender, there are blades that rotate in a stirring shaft. (3) the selection and application of mixers 1) type selection Concrete mixer should according to the project specific conditions (such as size, length of time limit for a project of quantities) and the requirements on the performance of concrete to be right choice. 2) the production capacity of the mixer is calculated The productivity of the blender is calculated in the following form: Q = 3.6, VK/t1t2t3 (m3 / h) Type t1, t2, t3 - for loading, stirring, discharging time (S); V -- the capacity of the blender; K - the utilization factor of each working time.

Q:What is the type of concrete mixer?

There are 250, 350, 500 and so on, and the model is for his capacity. Is that satisfactory?

Q:How does a concrete mixer operate

Before the concrete mixer starts, check the controllers for good. 2, the concrete mixer must clean the inside when used, especially in the winter, no foreign material in the front roller should be used, thus extending the service life. The concrete mixer should be placed in a firm place, and shall be secured with the support of the scaffold or the support of the shaft, and shall not be supported by the tyre. When the concrete mixer is in operation, it is strictly forbidden to put the tools in the roller, and pay more attention to safety. 5, concrete mixer in the feed hopper rises, for the sake of safety, personnel are strictly prohibited by or stay under the hopper, after the completion of the work of the mixer hopper fixed; When the concrete mixer is on site, it should be fixed in the mixer, cut off the power supply, and get into the mixer cylinder In custody

Q:How to safely use concrete mixer

Concrete mixer operation method: 1. The concrete mixer should be placed in a firm place, with the support of the bracket or the support of the foot barrel, and cannot be supported by the tyre. Before the concrete mixer starts, check whether the controller is good. When the concrete mixer is hoisted in the hopper, it is strictly forbidden to pass or stop by the hopper and set up the mixer after the work is completed. When the concrete mixer is running, it is strictly forbidden to put the tools in the roller, and pay more attention to safety. When the concrete mixer is on site, it should be fixed in the mixer, cut off the power supply, and when it enters the mixer cylinder, the outside must be monitored. (the operator of the concrete mixer (driver) must be trained in safety technical training, qualified for examination, and will be held on the certificate and strictly prohibit non-driver operation. The concrete mixer must clean the inside, especially in the winter, which can prolong the service life by using no foreign material in the front roller.

Q:A concrete mixer can last for years

Both, so you need an old driver and your partner in situations you don't know very well. 2, in the car use out of the maintenance in time according to the requirements of specification and manufacturer, at ordinary times into the construction site to site operators replacement using method, avoid ruining their error was to take. 3, service phone to keep in mind that other manufacturer, encounter problems consult factory staff more at ordinary times, during the warranty period (6 months) don't oneself to repair vehicles, service personnel to solve the problems to make manufacturer, to avoid unnecessary dispute in the future. Special attention is to keep the inside and outside of the tank, prevent the appearance of the can and keep clean, and can sell the car for a good price in the future.

Q:What are the small concrete mixers

The concrete mixer is divided into a falling mixer and a strong mixer The JZC series: JZC250.350.500 single-sleeper shaft machine mixer: JDC series: the JDC350.500 double sleeper shaft force mixer: JS series: JS500.750.1000.1500.2000.3000.4000

Q:How many tiles are in the concrete mixer on the site

The type of concrete mixer on the site is different, the power is different. The type of concrete mixer is normally divided by the amount of material, such as the JS500, which indicates the amount of material 500L. A concrete mixer usually has three electric motors: stirring motor, winding motor, pump motor. The following is the power of the blender: The amount of material is 350L, general power of 19.55 KW. The output is 500L, the mixer power is 18.5 KW, the hoist power 5.5 KW, the power of the pump is 750W, the total power is 24.75 KW. Output of 750L, mixer power 30KW, hoist power 7.5 KW, pump power 1.1 KW, total power 38.6 KW; Output 1000L, mixer power 37KW, hoist power 11KW, pump power 3KW, total power 51KW; Output of 1500L, mixer power 45KW, hoist power 18.5 KW, water pump power 3KW, total power 66.5 KW. The output is 2000L, the machine power is 75KW, the power of the hoist is 22KW, the power of the pump is 4KW, the total power is 101KW.

Q:What is the difference between a concrete mixer and a mortar mixer

The mortar mixer should be smaller! No different

Q:Concrete mixers need to be aware of which things

The concrete mixer driver must be familiar with the performance and operation of the machine, and wear the protective equipment according to the regulation. Article 2: before work should check whether the transmission clutch and brake is flexible and reliable, climbing rope fights with and without broken wires, transmission components such as the mixer of the big gear, pulley guard is in good condition, whether the motor grounding is good, confirmed rear can work. Article 3: the driver is not allowed to leave the job in the operation of the machine, and when the blender is running, it is forbidden to reach into the mixing bowl with an axe, spade or any other object. Article 4: when the hopper arises, no one shall pass or stay in the hopper. If it is necessary to check and repair, the power should be cut off, and the bucket will be held in the back of the link. Article 5: when the feeding operation is strictly prohibited, the operator will put the head into the hopper and the rack to inspect the loading condition. Article 6: if you need to go into the mixing tube for cleaning, you should disconnect the power supply, remove the fuse, and put the lock on the switch box, or be guarded by a special person.

Q:How many square concrete can be produced in an hour of concrete mixer

The blender can produce 50L concrete at a time, which is 0.05 square concrete. The blender is about 20 times before the concrete is produced. Mixer, it is a kind of with the blade shaft rotating in the cylinder or tank, will a variety of raw materials mixing, make it become a kind of mixture or machine suitable for consistency. The blender is divided into several kinds, such as strong mixing machine, single-sleeper shaft mixer, two-sleeper shaft mixer and so on. Note: mixers and automatic feeding machines must be cleaned, especially in winter, which can prolong life. A blender is a mixer because the mixing machine is commonly used to mix and stir all kinds of dry mortar