Circular Elevator Control Cables Fluoroplastic Insulated RF Coaxial Cable
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 100000 m/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
The product is manufactured according to the standards of GB/T5023.5-1997 . is suitable for connection of elevator equipment .The cable using PVC insulation and sheath, rated voltage 300/500V ,rated temperature is 70 ℃ Providing various wires and cables in accordance with designated specification.
二、Product structure
Conductor core and nominal cross-sectional area(mm²) | Insulation Thickness(mm) | Thickness of sheath(mm) | Average outer Diameter Limit(mm) | Min.RESIST at 70℃ (MΩ.Km) | |
Lower | Upper | ||||
6*0.75 | 0.4 | 0.8 | 9.6 | 6.5 | 0.011 |
6*1 | 0.6 | 1.0 | 11.0 | 8.7 | 0.010 |
6*1.5 | 0.7 | 1.1 | 13.3 | 9.9 | 0.010 |
6*2.5 | 0.8 | 1.2 | 15.8 | 12.4 | 0.009 |
7*0.75 | 0.4 | 0.8 | 9.6 | 6.5 | 0.011 |
7*1 | 0.6 | 1.1 | 11.0 | 0.010 | |
7*1.5 | 0.7 | 1.1 | 13.3 | 0.010 | |
8*0.75 | 0.4 | 1.0 | 10.6 | 0.011 | |
8*1 | 0.6 | 1.2 | 13.2 | 0.010 | |
8*1.5 | 0.7 | 1.2 | 14.2 | 0.010 | |
10*0.75 | 0.4 | 1.0 | 13.2 | 0.011 | |
10*1 | 0.6 | 1.2 | 14.5 | 0.010 | |
12*0.75 | 0.4 | 1.2 | 13.2 | 0.011 | |
12*1 | 0.6 | 1.2 | 14.8 | 0.010 | |
15*0.75 | 0.4 | 1.2 | 14.0 | 0.011 | |
15*1 | 0.6 | 1.2 | 15.5 | 0.010 | |
16*0.75 | 0.4 | 1.2 | 14.0 | 0.011 | |
16*1 | 0.6 | 1.2 | 15.5 | 0.010 | |
19*0.75 | 0.4 | 1.2 | 15.0 | 0.011 | |
19*1 | 0.6 | 1.2 | 17.8 | 0.010 | |
20*0.75 | 0.4 | 1.2 | 15.5 | 0.011 | |
20*1 | 0.6 | 1.2 | 18.3 | 0.010 | |
24*0.75 | 0.4 | 1.2 | 17.0 | 0.011 | |
24*1 | 0.6 | 1.2 | 20.5 | 0.010 | |
25*0.75 | 0.4 | 1.2 | 17.1 | 0.011 | |
25*1 | 0.6 | 1.2 | 20.8 | 0.010 | |
30*0.75 | 0.4 | 1.4 | 19.5 | 0.011 | |
30*1 | 0.6 | 1.4 | 22.6 | 0.010 | |
37*0.75 | 0.4 | 1.4 | 21.6 | 0.011 | |
37*1 | 0.6 | 1.4 | 23.0 | 0.010 | |
40*0.75 | 0.4 | 1.4 | 21.8 | 0.011 | |
40*1 | 0.6 | 1.4 | 25.5 | 0.010 | |
41*0.75 | 0.4 | 1.4 | 22.5 | 0.011 | |
41*1 | 0.6 | 1.4 | 27.0 | 0.010 |
- Q:it is not the power cable either
- That is from the handbook IF THE vigour mild IS BLINKING AMBER — The laptop is receiving electrical vigor, but an internal vigour concern could exist. ? make sure that the voltage decision switch is set to compare the AC energy at your vicinity (if applicable). ? ensure that the processor vigour cable is securely related to the procedure board. Has your pal upgraded or brought whatever? This might most likely require a stronger vigour supply, wile the older one could meet the ouput for a bit of it will fry after a short while.
- Q:When the tv repair company comes out do they take your tv power cable or have there own one for tv
- All TV repair people have all the power cables they could need. BUT... if they think that your fault could simply be a fault in your cable, then they may take it with them, though they would be more likely to try swapping it on your premises before removing the set.
- Q:so my old psu fryed itself, and i just ordered a new one, i have another psu that i can use but its only 350 watts, it has no gpu connector, can i still use my computer without the power for the gpu, i have no onboard video and i have a radeon hd 6850 256 bit gddr5. and my cpu is a amd phenom 2 x6 (six core) 1045tthankyou
- I assume you are talking about using power directly from the MOBO? If so, no. You won't be able to. You need to have your graphics card plugged into the PSU as well as the MOBO.
- Q:holes to route the cable through anyone have pics or a website so i can figure it out
- ye this is just a common problem on many cars/tucks not just ford. did a custom install on my jeep and had to cut small hole in front left insulation under dash. it came right out into open space under hood and made great place to run wire. if u cant see any holes/spaces to run it then ur gonna have to cut a hole ro have someone do a pro install for you. (ultimately its cheaper easier to diy - need power drill and a big enuf bit to fit wire thru. im sure u can figure it out, just go slow and be carful, mine worked quik and easy and sounds great. good luck w/ all that - hope i helped
- Q:Whether the weight of the power cable per meter is calculated
- AC power is a two-phase exchange of the power system, itself is positive and negative exchange, the electromagnetic effect can almost count the daily life of the free radiation are more than this number, and can rest assured that the general life supplies, the larger electromagnetic radiation from the DC Of electrical supplies, which only need to pay more attention
- Q:turun these sentences from active to passive remember- only by plus a noun or pronoun if this information is necessary .
- 2. All the power cables were brought down by a storm. 3. What is he had invited her before last weekend?
- Q:I left my power cable at my cabin, which is a few hours away. I don't want to replace the cable (I'll be going back anyway in a few days), but I need to use my laptop. So far I've tried an old laptop cable, but its to big, and a game system adapter, but it doesn't have enough power. Are there any solutions that don't involve me buying a new cable?
- Do NOT play guessing games with this. If you use one of a higher rating or worse with reverse polarity input you will totally destroy the laptop.
- Q:Every time i unplug the power cable from my laptop the wireless connection stops working and i can't seem to fix it by changing the wireless power options any ideas?
- I am assuming that you are using windows, If you haven't done so already, right click on the battery on the right hand of your task bar and click on the power options. now, click on CHANGE PLAN SETTINGS Then click on CHANGE ADVANCED POWER SETTINGS a new window should pop up, look for wireless adaptor settings and select maximum performance, This could be your answer but then again I'm not sure what you have already attempted.
- Q:Is the ribbon cable the data cable and the wires the power cables?
- You are correct. Power cables will always have 4 or more separated wires going into a plug. Data cables have all of their internal wires inside a single sheath.
- Q:is not giving direct contact to my lights....so i just want to replace the power and ground cables for the headlights.??? please help
- The power for the headlights comes from the front fuse/relay box, usually on the drivers side wheel well under the hood. There should be a relay in the box for the headlights.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Circular Elevator Control Cables Fluoroplastic Insulated RF Coaxial Cable
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 100000 m/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
New products
Hot products
Related keywords