Q:Graphene with graphite powder where to do ah, high carbon content of the?.

Look at the document, 45 microns will do. Good to buy. Preferably expanded graphite. But then again, if you buy graphite as graphene... The difficulty is not small

Q:What solvent can be used to dissolve Teflon?

Market suspension of PTFE fine powder. It can be mixed directly with graphite powder without dissolving. It can press molding and sinter products.

Q:How to deal with graphite powder? Anyone recycle it?

The use is so great that every friend who does plastic business needs it

Q:What if the key is inserted in the hole and can not be drawn out?

The end of the pencil is made of graphite, and the graphite powder can be used as lubricant for the machine running under high temperature, and the pencil core can be made. Add some pencil powder to the keyhole. Try to lubricate the inside of the keyhole. Try it!

Q:Can ultrafine powder iron conduct heat? How many purpose graphite powder can be called superfine stone powder? Pingdu graphite powder which good?

Ultrafine toner is a thermal conductive function, because ultrafine toner is processed from natural graphite, which inherits the characteristics of natural graphite conduction and heat conduction.

Q:The difference between silicone and silicone?

Characteristics of silica gel:Silica gel is a one component, room temperature vulcanized liquid rubber. Once exposed to air, the silane monomer condensed, forming a network structure, crosslinked, unable to melt and dissolve, elastic, rubbery, and adhesive. The thermal conductivity is slightly higher than the general rubber, but compared with the thermal grease is much lower, and once cured, it is difficult to separate the adhesive objects, generally can only be used in graphics cards, memory radiator. Mainly used in silicone adhesive low-end card heat sink and the main chip, bonding and particles, particles of the memory memory and radiator. The high-end products are generally used to dissipate heat with grease, and then use the clip fins fixed on the substrate, but it will increase the cost of. The radiating fins are fixed in the low-end graphics chip and good memory particles, and the heat sink in the low-end graphics cards generally are relatively small, so the use of silicone adhesive is common; and high-end graphics and the CPU heat is far greater than the general low-end graphics chip and memory particle heat generation, and the head is relatively CPU so, the grease with radiator and clip form. If used on the CPU will cause overheating, and it is difficult to remove the heat sink, pull down, it may directly damage the CPU or CPU socket. And if you pull down the silicone adhesive cards, heat sink, it is possible to display the chip from the PCB pull down. From this point, we can see who has a better heat conduction effect.

Q:The graphite powder can replace thermal grease?

Graphite is non-toxic, but graphite powder is harmful to human body; and graphite is used mostly in conductive products (common battery).

Q:How does graphite powder solidify into a lump? What bond is best used?After solidification can be more than 1000 degrees high temperature does not change

There is no binder that can withstand 1000 degrees C. At such a high temperature, any binder has been carbonized and has lost its bond effect, so it is impossible if you want to use the binder to make the graphite powder into pieces

Q:Can I use super fine stone powder in grease or lubricating oil?

Not really. It depends on the amount of graphite powder. If the graphite powder forms a continuous through zone, it can be considered a conductor.You can use lubricating oil, preferably not with graphite, which will cause the sliding rheostat to fail

Q:How can graphite paper be made? Can graphite powder be solidified without brittleness?

Single layer graphite paper is thin, thickness less than 1mm, strength is low, it is the raw material of electric heating felt and advanced gasket sealing material. It is widely used. The single graphite paper and multilayer plate are rolled into thick composite boardI hope it works for you