Full Electric Aerial Work Platform Mode--JCPT8(I)/9.5(I)
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1000 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1KG=2.2LB 1INCH=25.4MM
Model | JCPT8(Ⅰ) | JCPT9.5(Ⅰ) | |
Safe working load | kg | 450 | 400 |
Extended platform safe working load | kg | 112 | |
Outdoor use wind speed 45km/h | kg | 100 | |
Maximum working height | mm | 10000 | 11500 |
Maximum platform height | mm | 8000 | 9500 |
Overall length | mm | 2510 | |
Overall width | mm | 1150 | |
Overall height | mm | 2450 | |
Working platform size | mm | 2500X1120 | |
Platform extended size | mm | 1270 | |
Minimum ground clearance | mm | 120 | |
Wheel base | mm | 2080 | |
Minimum turning radius (inner wheel/ outer wheel) | mm | 1930/3740 | |
Drive motor | 2x24VDC/1.5kw | ||
Lifting motor | 24VDC/3kw | ||
Driving speed (furling state) | km/h | 4 | |
Lifting state | km/h | 1.1 | |
Lifting/ descending speed | sec | 70/60 | 89/88 |
Accumulator | 4x6V/250Ah | ||
Charger | 24V/25A | ||
Maximum gradeability | % | 35 | |
Working maximum allowable angle | 。 | 3 | |
Tyre | 406x125 | ||
Overall weight | kg | 2200 | 2280 |
Standard Configuration
Can bus line intelligent controller
Proportional controller
Automatic pot hole protection system
Charge lamp
Working chronometer
Strut bar for safe overhaul
Transport standard forklift hole
Electric circuit fault code display
Low voltage alarm
Emergency descending button
Extended platform
Charge protection
Horn
Tilt protection
Tilt alarm
Controller overtemperature protection
High capacity traction battery
Overload limit
4x2 drive
Optional Configuration
AC power source connected to platform
Strobe lamp
- Q:History of Chinese machinery development
- China in about 40 to 500 thousand years ago, there have been processing crude scraperschoppers and three prismatic tip like device primitive tools. 4~5 years ago appeared grinding technology, many stone tools have been relatively smooth, blade is also sharp, and has a single edge, double blade, convex blade, concave blade and round blade of the points.
- Q:Chinese people make world class high tech machinery, so are their cars any good?
- I don't know about cars. However, KYMCO makes a scooter that is reliable and on par with Honda and Yamaha but only costs half as much. I would say it depends on the brand name as there are many cheap chinees scooters that I wouldn't buy.
- Q:Machinery used in solid waste disposal can be subject to the regulation of the Noise Control Act. true or false
- It IS, not can be. subject to the same law as anything else.
- Q:What is defined in construction engineering as large machinery?
- Tower crane, static pile pressing machine, construction elevator, submersible drilling machine, concrete mixing station, crawler excavator, bulldozer, crawler crane, diesel hammer, roller, rotary drilling machine, high-speed hoister, vibratory piling machine (static vibration), high pressure rotary grouting pile machine, concrete mixer. I know so much
- Q:Use of construction machinery
- Function: mainly used for national defense construction project, the construction of transportation, energy industry construction and production, mining and other industrial raw materials, construction and production, forestry and water conservancy construction, industrial and civil construction, city construction and environmental protection.
- Q:Classification of materials in machinery industry
- Belonging to inorganic materials are refractory, ceramics, abrasives, carbon and graphite materials, asbestos and other organic materials; it is wood, leather, adhesive and synthetic polymer materials, synthetic rubber, synthetic resin, synthetic fiber etc.; the reinforced composite material composed of resin matrix with non metallic fiber.
- Q:To ask, I have better supply of construction machinery here, I would like to foreign trade, I do not know how the international market in the near future, engineering machinery, foreign trade to prepare what knowledge?
- In addition to a slight increase in exports in March and April, exports in other months remained low. If it meets the "second financial crisis scene" situation is very bad. At this critical moment, the country's policies and regulations on imports and exports have been introduced, although there is no particularly good news, but through analysis, there are still some bright spots.
- Q:I always wondered if nerves sent signals to our muscles, if someone lost a leg or an arm, is it theoretically possible to attach someone's nerves to machinery and control it like a limb?
- yes i have heard some work is being done with that
- Q:I'm thinking about making something out of wood but I dont have any machinery to do it, all I have Is a saw and a couple knives but that's it. Any ideas?
- tooth pick.
- Q:I am asking as a potential manufacturer who is looking to set up a factory in China and use this machinery to produce goods. If you know, could you also please post some links so I can further my knowledge. Thanks!
- I understand your question. The best source of information would be the Chinese Embassy in Washington, DC. I do know of at least one U. S. exporter (cotton and textile fibers) that was asked if he could supply a reconditioned cotton gin. As far as I know there were no U. S. restrictions but it never got off the ground because the Chinese buyers either couldn't or wouldn't pay the asking price.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Full Electric Aerial Work Platform Mode--JCPT8(I)/9.5(I)
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1000 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords