Q:On my PSU I have two PCI-E 6 pin cables. I have looked at the motherboard and saw there is nowhere to plug it in and my motherboard manual says of no slots for it but I do have two PCI-Express slots. Do they plug into the cards themselves or something?How do I use the PCI-E power cables?

PCI-E power cables are used for add-on graphics cards that connect to your motherboard. These cables are technically supposed to connect to those cards, NOT the motherboard itself. You don't have to plug in every cable that comes with you PSU anyways, just leave the unused ones aside, and they wouldn't be provided with electricity

Q:I have my old 350 power supply cable but i got a new 520 one. do i have to use the defuly 520 power suppl cable? i use my old cabbke

The cable merely supplies the power to the PSU. You're confusing the wattage of the PSU (350/520W) with the supply voltage (110/120/240v). The cable will work perfectly with either one?

Q:the light on the power cable box is orange when the xbox is turned on does this mean the cable is broke or the console? thanks

try taking all the cables out from the back of your xbox and tv and re-attaching them properly. If this does not work, consider going to the microsoft website under the help section, and see if you can find the answer. If not, then ring them up for free and they will tell you.

Q:Can i make the CAT 5 speaker cable, explained on many websites, as a 4 gauge power wire from my battery to my amp?

No, the cat 5 wire will heat up too fast.

Q:are the power cable for the super nintendo and nintendo 64 the same?

No the power cable is not the same. The video cable is the same though. It's the same for SNES, N64 and the Gamecube

Q:i have a 97 chevy malibu and i need to know where to run the power cable through the fire wall. or where could i get a diagram that is simple enough for me to understand...

As mentioned you should be able to find a hole already but I like to drill my own and keep all of my electronics separate from the other factory wires. It should not hurt anything to run them with the other wires but you could get some induced current plus it makes it easy to keep track of all your stuff in case you would need to take it out. 2 things to keep in mind no matter where you go through though 1 make sure you have a bushing in the hole to protect the wire and 2 be sure to run your ground beside your power wire, dont separate them too far.

Q:the contant power cables go to my car alarm, led lights, siren, power locks, power windows, and alarm bypass... they are very small thin awg wires... the ignition and constant power cables under ignition housing are alot thicker... is this possible with no problems?

I wouldn't tap into any wires where your alarm is.. If you have any issue, it could arm your alarm, and you might not be able to start your car, until the wiring was fixed...

Q:My mother has moved to Australia, taking her Fujitsu Siemens (Amilo model) laptop with her. Very shortly after, her power cable stopped functioning, and she would like a new one. Unfortunately, she is not tech-savvy at all and doesn't seem to be able to find the thing online, and I being from Europe, have trouble searching in her stead. I don't even know what an Australian plug looks like and I have no clue regarding the currency...All and any help is much appreciated.

maximum computing device skill components run on a hundred and ten-240 Volts. verify the back of the skill furnish placed a million/2 way down your skill cord. If it says a hundred and ten-240 V then you definately are good to circulate. Al you will could desire to purchase is an adapter which you will purchase from the Airport. or circulate to an electronics save and purchase the time-honored equipment, which suits in one hundred forty international locations. it quite is a small plastic adapter which you plug your cord in, and has 2 pins rather of three. desire this helped :)

Q:Can anyone explain where I need to plug in the 6-pin cable for my ATI Radeon 1650 Pro graphics card? Or any pictures/diagrams? Thanks!

my PSU came with that adapter :P

Q:what can i do so i can use my DL burner on my new pc?

EIDE (Enhanced IDE) is no longer a standard on most computers which uses SATA. In turn, they also use different power connections. The channel cable is dependent on the mother board, but the power supply is dependent on the power box. If there is an IDE channel, but no power cable, you have only two options. 1. Buy a new SATA based drive. 2. But a new power supply. Buying a new power supply to replace the one you have is definitely a void of warranty. You are much better off with a new drive.